AutoCAD Civil 3D :: Stationing Still Disappears In Viewports
Feb 25, 2012
Stationing still disappears in viewports.
Centerline alignments are in my BASE file.Got the station labeling to work correctly.Have the BASE file x-ref'd into a working IMP file (for plan & profile sheets). This is what I plot from, etc.The station labeling appears fine in modelspace in the IMP file.The station labeling disappears in viewports in paperspace in the IMP file. Will not appear even when I am in MS mode in paperspace and in the viewport itself.All the associated layers are turned on and thawed, even VP-specific settings. REGENALL does not work. Annotation scale is set to 1"=30' in all files.I always scale my border up to the plot scale in paperspace. This is a habit that goes back almost two decades in LDD.
Maybe a setting regarding plot/annotation scales is the culprit? By playing around with the buttons in the lower right corner of the screen I got them to show up once by accident then they disappeared again when I did a simple REDRAW. I do not remember how I got there, but the process was convoluted and probably not optimal or correct.I am using Civil 3D 2011, btw.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
View 4 Replies
ADVERTISEMENT
Jul 13, 2012
I need to create a profile view that starts at Station 189+00 and ends at Station 175+00 such that the stationing of the profile decends from left to right. How do I do this in Civil 3D 2010?
View 5 Replies
View Related
Apr 18, 2013
When labeling pipes, the lengths and stations do not always match. this appears to be related to a rounding issue. for example, the first pipe may start at 0+00 and have a length of 50.69167397’. The reported station in the structure label (using “normal rounding”) is naturally 0+50.69, as anticipated. The upstream pipe has a length of 43.36435901’, resulting in a total length from 0+00 of 94.05603298, resulting in a station of 0+94.06. However, the rounded values of the lengths (c’mon, nobody reports lengths to the 100-millionth) labeled on the pipes (50.69’ and 43.36’) total an expected station of 0+94.05.
I have tried all manners of “rounding” in the label styles, but it always falls down in one situation or another. I have also tried setting in the network and pipe “Feature Settings” for distance to a locked accuracy of 2 decimal places, but that does nto seem to do it either.
So, the question is, is there a way to resolve this issue without having to move one of the structures 0.001’ to resolve the mathematical parallax?
View 6 Replies
View Related
Oct 9, 2008
We are in the market of switching software programs (from JDS Alignment-a database driven program) for stationing alignment centerlines for pipelines. We currently run Civil 3D 2009 and Map 09. Carlson claims that their software can do this, but we'd rather not spend the extra money if we already have the functionality built into our existing programs.
We are looking for a program (or a function in Civil 3D 2009 and Map 09-similar to the Fieldbook functionality) that labels interference crossings, appurtenances and other pipeline, utility and topographical features based on a shot code. I attached a DWG. that shows how we want it to look, and the types of features we want stationed.
View 2 Replies
View Related
Apr 11, 2012
Any way to label the slope stationing rather than horizontal stationing? This is common when doing long pipeline projects (40 miles) or more in very steep terrain. I am doing one now that is only 1 mile and the 2D verses 3D length is a difference of 100'. 40 miles that would mean it would be off 4000'. The client uses this stationing as a guide to know how much pipe they need. If you would do that horizontally that would be way off the mark.
I am using Civil 3D 2010? Maybe its included in 2012 or could that possibly be an option for future releases since it is a 3D software.
View 9 Replies
View Related
Jun 27, 2013
The stationing along my alignment line is missing. I do believe it was there yesterday at 5 but hey who knows. How do I restore it the PI stationing is there.
View 4 Replies
View Related
Oct 3, 2012
We are doing a waterline, approximately 5 miles worth, and I was curious how to add the data bands to the minor stationing as well. We want to show EG elevations every 25' but so far I'm unable to find a way to make it show. The major stations are fine, I'm just not seeing the "switch" to get the minor ones on as well.
View 2 Replies
View Related
Jun 20, 2011
I created an alignment from an existing line and am having an issue with the stationing. The length of the original line is about 14,666 ft but when I convert it to an alignment it is 1,222 (1/12 of original).
View 8 Replies
View Related
Aug 19, 2013
I need to update metric numbers on a older CAD file to imperial numbers. Right now it is all single line text. Any way to easily convert single line text to some format that could then be converted from metric to imperial? I have stationing, pipe sizes (in milimeter), inverts, etc.
View 7 Replies
View Related
Dec 10, 2012
How do I revise the profile stationing from 100+00 to display 100.
Also is it possible to remove the beginning and end stations in the profile view
I have attached an example.
View 4 Replies
View Related
Dec 20, 2012
I have a user with an alignment that has the stationing labels in 20 and 60 scales annotative. He needs to move one of the 60 scale labels because at that scale it overlaps another label nearbye. However when he makes the 60 scale the active scale and selects the label and moves it with a grip like normal, it also modifies the positioning of the 20 scale label. Not sure if it matters, but unlike normal annotative text, it does not shadow the other scales when he selects it, though that might be an independent setting.
View 2 Replies
View Related
Jan 14, 2013
I have some sample lines that highlight utilities needing a section view. I've now moved my sample line to highlight the true cross section stationing for these crossings. Why doesn't the station value update for the sample line once this is moved. For some reason I remember the station text on the sample line updating itself automatically in the past.
View 2 Replies
View Related
Mar 13, 2013
I have a road with storm drain and sanitary sewer. There are three alignments, one for the road centerline, one for the sanitary sewer and one for the storm drain. I would like to label the structures with the stationing from the alignment it's on but I would also like the label to include the road centerline station perpendicular to the structure.
Something like this:
SS-MH #4
Sta. 10+00
=Road Sta. xx+xx
View 2 Replies
View Related
Feb 21, 2013
When I run my production sheets I'm only seeing 1300 feet of my profile and I like to see 1500 feet of my profile at 50 scale. Is there a way to show 1500 feet of profile?
View 9 Replies
View Related
Mar 5, 2013
(I'm using Civil 3D 2011)
I have a corridor with an associated sample line group, and I have produced some material volume tables to give me quantities for my corridor structures and cut/fill volumes. When I look at the material volume tables they are at a seemingly arbitrary stationing. The sample line group which the material volume tables are (supposedly) based on are on alignment L1000 and they run from station 1133+73 to station 1154+00 every 10 meters. The material volume tables show volumes broken down by stations starting at station 3719+58.66 and runs through to station 3786+08.92. It is sampling at a seemingly arbitrary frequency, there is absolutely no alignment in my drawing that has stations remotely resembling those numbers, and there is definitely no sample line group it could be using that samples an alignment or stationing anything like that shown in the materials volume tables. Here is a quick screenshot of what my material volumes tables look like:[URL]
View 2 Replies
View Related
May 3, 2012
I using a data reference/shortcut to properly label an alignment in paperspace. However when I reference the alignment in and apply the labels the aren't the same as the original alignment that I am referencing. Is there a setting where I am supposed to apply a new beginning station.
Also it seems as though the stationing(distance) isn't even matching up 1:1 with the original drawing. For example in the original base drawing my alignment starts at 10+00 with the next PI at 14+76.98, but the stationing on the reference alignment starts at 0+83.33 with the very same PI being labeled as 1+23.08. So the very same distance is 476.98' in the real design and the drawing it's being referenced in, but the stationing of the referenced alignment shows it as 39.75 Units.
I've attached a screen of the beginning of the alignment.
Civil 3D 2012
Windows 7 Service Pack 1
Intel Core i7-2600 CPU
16GB RAM
View 5 Replies
View Related
Sep 28, 2012
I've created a network of my stormsewer (which means the stormsewer lines are all on different streets) and added the inlets to my street profiles.
How do I get the profile structure labels to reflect the stationing from the street alignments?
View 2 Replies
View Related
Sep 4, 2012
I have just installed 2012 and have drawn a 3d model. In paperspace i have a couple of viewports , all nicely set out at 1:5 scale. then i click in another viewport and bam, all the other viewports change scale (zoom out) and orientation. is there some system variable that i have overlooked?
View 9 Replies
View Related
Nov 20, 2013
When I open my profile file in civil 3d 2014 the grid disappears so I regenerate it and they are back. The problem I am having is when I run my cursor over the grid, it will give me a fatal error.
View 5 Replies
View Related
Aug 18, 2011
All of my points vanish after I use 3dorbit, how to reproduce this? I have been able to make it happen in 2 different drawing, unless I just forgot how to search the board altogether.
My points still show up in the toolspace point list but auditing and regening does not bring them back to the drawing.
View 7 Replies
View Related
Oct 1, 2012
I'm having some trouble with .fbk files disappearing after I import them. I'm sure I am missing a setting somewhere but I don't know where. I have a (slightly clunky) workaround on setting things up correctly.
We went straight from LDD 08 to Civil 3d 13 so it is a bit of a learning curve.
I am trying to use Civil 3d 2013 with Trimble Link. My procedure is to download the file with trimble link and then follow the wizard from there. My .fbk imports fine, but if I need to edit anything I find that it is missing from the folder that I just imported it from.
If I copy and rename the .fbk prior to importing it I can import and edit the re-named file no problem, it just seems to be the initial import done by the wizard that deletes the file.
View 2 Replies
View Related
Aug 23, 2011
I have a lot of sheet DWGs with a single layout in each. The layouts have several viewports into model space.
Is there a way to export out the layout tab where the viewport contents have been converted and placed into the layout space?
Ideally, I'm hoping to basically convert the viewport heavy paperspace into a dumb model space layout.
View 3 Replies
View Related
Mar 28, 2013
I know for a fact that my viewports were in the correct location, at the correct scale and they were locked. To give you a little background, in my plan sheet drawing I am showing a plan view and profile view and I use 2 xrefs to do this, my master plan drawing and my profile master. I was switching between the profile master and my plan sheet drawing doing some adjusting to the profile master's profile VC labels and making sure they will fit into the viewports I made in the plans sheets. As I am doing this editing, I am saving the profile master and reloading the plan sheet drawing. After I come out of the reload in my plan sheet drawing, every single viewport that shows the master plan xref was reset to a position way out in left field. This makes absolutely no sense because I wasn't working with the plan view viewports and I am 100% certain they were LOCKED. How is it even possible that they get moved if they are locked?
I am able to get around this problem by re-aligning my viewports to their correct position, its just annoying having to do this again. I would really like to know what is causing this so I can prevent it from happening again.
View 9 Replies
View Related
Jul 26, 2012
I am getting hollow blocks in Vieports. When I look in modle space the blocks are filled.
View 4 Replies
View Related
Feb 23, 2012
Every time I switch from my "Civil3d" workspace to "3D Modeling" and back again, all my toolbars disappear. Not the end of the world but certainly a pain in the butt.
View 4 Replies
View Related
Feb 21, 2013
I have a Surface that is data referenced into many different drawings. On one of the drawings, the reference will not show contours until I sync. It will show the boundary. Just one of them...but I can't use sheet set manager to publish drawings since I have to open it up and sync. Is there a setting we changed? The styles are all the same. The surface is on C-Surface, the boundary is on C-Surface, the Contours are on C-Surface-MJR, C-Surface-MNR.
View 2 Replies
View Related
Aug 3, 2013
I created a DWG with Civil 3D. When it is viewed with LT or TrueView the contours for the surface disappears. I checked the detail switch on the VIEW tab but it did not seem to make any difference.
Is this a function of LT and TrueView?
View 2 Replies
View Related
Dec 5, 2012
why the text and leaders placed over viewports (in paperspace) keeps disappearing? The text is still there...just not visible. i can select the text with no problem. and if i move it off of the viewport then i can see it just fine. this is happening with all the viewports in my drawings... on all tabs. If i close the drawing and reopen then all the text appears again.....but when i switch tabs then come back...the text vanishes again.
View 2 Replies
View Related
Mar 13, 2012
I am creating plan sheets and using the sheet creation tool. The plan sheets I am looking to make have stacked view, similar to a plan and profile sheet, only they have the horizontal alignment in both views.
I have a template set up with two viewports, but when I try to create the sheets it puts the same view frame in both of the viewports. Is there any way to set this template up so that I can have, lets say, STA 100+00 - 110+00 in the top viewport and then STA 110+00 - 120+00 in the bottom viewport. I understand that I can move the viewports once they are created, but I would rather have that done automatically. I am not sure if what I want done is possible with Civil 3D.
View 3 Replies
View Related
Jun 26, 2012
I attach an xref to a drawing, plan profile, and align the parts of the xref in each viewport the way I want them to appear.
The host drawing is a generic plan profile sheet border. The viewports are set to the same scale same annotative scale, and are undefined, not a plan or profile viewport. I save the drawing and get out of cad all together. I restart cad and open the drawing. The plan view viewport is visible and the xrefs are also. In the profile viewport nothing is visible or only one line is visible. Items in the view port are viewable, not frozen in the viewport, not turned of. The annotative scale is exactly the same for all viewports as is the xref drawing.I am xrefing a civil 3d 2011 aliment and profile drawing into these sheets. The only way to see the xref in the view ports is to detach and reattach the xref. To make things worse this does not happen to all drawings that are using the border that I used to create this drawing set.
View 3 Replies
View Related
Jun 21, 2013
I have 2 viewports, one at 1:1000 and the other at 1:250. They show exactly what I want with respect to the area covered and the zoom factor, BUT the text on all of the survey shots is changing size based upon the different viewport scales.
I need the text on the survey points to remain the same size and not adjust based upon the viewport scale. So the text should be a fixed scale and not associative.
I have looked at the labeling style Composer dialogue and can not see a way to specify a fixed height which does not adjust based upon the viewport scale. I can set the point symbols to a specific size so they do not scale - Can I do the same with the text labels (description, elevation, etc.)?
View 9 Replies
View Related
