Every time I switch from my "Civil3d" workspace to "3D Modeling" and back again, all my toolbars disappear. Not the end of the world but certainly a pain in the butt.
View 4 RepliesI was working on a file in the 'edit' workspace and decided to go to the "adjust" workspace and lost the file. Is that normal for it to close the file when moving to another workspace?
I do see that if I have the organizer opened to the folder with the file in it, it stays. This seems cumbersome though to have to open the organizer and find the file as opposed to just going to the Open folder button at the top of the Edit workspace to get the file. This is also nice because the Open button remembers where I was last whereas the organizer makes me start from scratch to drill down to the appropriate folder.
I'm running LR5 on Windows. I've got the grid view on my primary display and a second display showing the loupe view.
If the focus moves to another application (i.e. a small notepad window on the primary display) then I can still see LR with its grid view in the background behind notepad on the primary display however the loupe view on the second display disappears and I can see the desktop.
Is it possible to configure LR not to automatically hide the 2nd display when the input foucs moves to a different wiindow? I'd like to be able to continue displaying the image on the 2nd display while I'm doing something else on the primary display.
I've not been able to check but I've a feeling this is new behaviour in 5, I don't think 3 or 4 did this.
Windows 7. AutoCAD Civil3D r13 and 14.
Yes the toolbars are unlocked and even when they are locked using the ctrl key still will not alow me to resize. This used to work but now for some reason will not anymore.
I finally cleared enough space on my creaky old PC to install 2013 and once again am having trouble with that CUI.
The ribbon is useless to me, partly because it contains nothing relevent (most of the commands I use are legacy) and partly because this creaky PC can't handle it. My usual workspace is set to toolbars (some custom) and menus.
I exported my workspace from 2012 including all the menus and toolbars.
I imported that cuix file into 2013. Everything is there listed as it should be, but when I select the workspace and click apply I have neither toolbars nor menus showing (well I have a tiny toolbar with just new, open and save on it, and another that appears to be related to survey, but none of the ones I want or need.)
What do I have to do to get my menus and toolbars back? they haven't abolished them completely? This PC cannot handle the ribbon and my every request for an upgrade is denied due to politics.
For some reason my FILEDIA variable switches to "0" often and randomly. I am running the .dwt shipped with C3D 2011 and C3D 2012 with custom civil styles added. what could be toggling it?
View 3 Replies View RelatedI am having some troubles with Civil 3d. I went from a 32-bit windows XP machine with 4 gigs of ram and a dual core 2.8 GHz processor with an older radeon graphics card to a 64-bit windows 7 machine with 16 gigs of ram, core i7-2600 (3.4 GHz) quad core processor, and an nvidia quadro 4000 2GB graphics card and I thought my life would be easy. But apparently great hardware will not solve all of my software issues.
When I try to switch to model space from paper space in C3D 2012 (sp1) it hangs for maybe 5 minutes before finally switching over. I have only worked on two drawings with the new machine, but it does it on both. And not every time, just half the time in one drawing and most of the time in the other.
I have a drawing that is "Not Responding" when switching from a layout tab to model space by clicking the "Model" tab. I ran a recovery on the drawing and there are no errors. I can't get into model space except by clicking inside my viewport.
View 5 Replies View RelatedFor a while now...every time i switch to model space...autocad gives me the NOT RESPONDING problem. i get the spinning icon and it seems to last forever. seriously...i can go get coffee and come back and its still thinking. i've cleared temp files in autocad. what could be causing this?
View 3 Replies View RelatedEvery time i switch to Paper Space I get a Fatal Error in Civil 3D 2013. What could be casing the crash? It does it in every drawing so it does not appear to be specific to any one perticular drawing.
Civil 3D 2013
Switching the Cut/Fill convention in the mass haul diagram,
If there is an option to switch the cut/fill convention in the mass haul diagram such that the fill takes the (+) sign in the cut takes the (-) sign
on a couple of my lager project i have recently had issues with Autodesk Civil 3D 2012 Freezing in Model Space switching between Isometric views. the number of view changes varies each time but seams to freeze during regen of the model.
I have checked the performace tuner and updated my driver, see Attached Log.
We are in the process of changing our CAD Stations over to Windows 7 64 bit, but im not scheduled for a couple more months.
System:
Dell Precision T3400
Windows XP SP3 32 bit
Intel Core2 Quad (Q9550 @ 2.53GHz)
4GB RAM
When I open my profile file in civil 3d 2014 the grid disappears so I regenerate it and they are back. The problem I am having is when I run my cursor over the grid, it will give me a fatal error.
View 5 Replies View RelatedAll of my points vanish after I use 3dorbit, how to reproduce this? I have been able to make it happen in 2 different drawing, unless I just forgot how to search the board altogether.
My points still show up in the toolspace point list but auditing and regening does not bring them back to the drawing.
I'm having some trouble with .fbk files disappearing after I import them. I'm sure I am missing a setting somewhere but I don't know where. I have a (slightly clunky) workaround on setting things up correctly.
We went straight from LDD 08 to Civil 3d 13 so it is a bit of a learning curve.
I am trying to use Civil 3d 2013 with Trimble Link. My procedure is to download the file with trimble link and then follow the wizard from there. My .fbk imports fine, but if I need to edit anything I find that it is missing from the folder that I just imported it from.
If I copy and rename the .fbk prior to importing it I can import and edit the re-named file no problem, it just seems to be the initial import done by the wizard that deletes the file.
Stationing still disappears in viewports.
Centerline alignments are in my BASE file.Got the station labeling to work correctly.Have the BASE file x-ref'd into a working IMP file (for plan & profile sheets). This is what I plot from, etc.The station labeling appears fine in modelspace in the IMP file.The station labeling disappears in viewports in paperspace in the IMP file. Will not appear even when I am in MS mode in paperspace and in the viewport itself.All the associated layers are turned on and thawed, even VP-specific settings. REGENALL does not work. Annotation scale is set to 1"=30' in all files.I always scale my border up to the plot scale in paperspace. This is a habit that goes back almost two decades in LDD.
Maybe a setting regarding plot/annotation scales is the culprit? By playing around with the buttons in the lower right corner of the screen I got them to show up once by accident then they disappeared again when I did a simple REDRAW. I do not remember how I got there, but the process was convoluted and probably not optimal or correct.I am using Civil 3D 2011, btw.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
I have a Surface that is data referenced into many different drawings. On one of the drawings, the reference will not show contours until I sync. It will show the boundary. Just one of them...but I can't use sheet set manager to publish drawings since I have to open it up and sync. Is there a setting we changed? The styles are all the same. The surface is on C-Surface, the boundary is on C-Surface, the Contours are on C-Surface-MJR, C-Surface-MNR.
View 2 Replies View RelatedI created a DWG with Civil 3D. When it is viewed with LT or TrueView the contours for the surface disappears. I checked the detail switch on the VIEW tab but it did not seem to make any difference.
Is this a function of LT and TrueView?
why the text and leaders placed over viewports (in paperspace) keeps disappearing? The text is still there...just not visible. i can select the text with no problem. and if i move it off of the viewport then i can see it just fine. this is happening with all the viewports in my drawings... on all tabs. If i close the drawing and reopen then all the text appears again.....but when i switch tabs then come back...the text vanishes again.
View 2 Replies View RelatedThe contour values when place on the the render material of rock image it disappears so I had to place it on the side. how the image is use a render material?
View 1 Replies View RelatedWe are working together with another firm here in town. The are doing the road and we are doing the utilities. They have established the alignments and profiles. When I import them all the data comes in. For whatever reason I do not have their profile views so I create my own profile view and put their profiles in them.
When they send an updated .xml file of all the alignments and profiles, they import okay but my profile views disappear. I assume it's because in their .xml file that I import, there are no profile view defined.
Is there an options when you export and alignment to an .xml file that you can include the profile views with it as well? This way when I import them I would get them.
i inserted an areas image with geomap but as i zoom cloce the image disapears and i get a tile with a white image of a camera. can i disable it? it is very annoying.i dont care if i loose ressolution if i get closer .why autodesk did that?
View 3 Replies View RelatedAfter adding 9 or so breaklines, the display of my surface (e.g. contours) disappears when I add the next breakline. Based on the surface elevation shown at the pointer location, the breakline seems to have been added and the surface rebuilt.
View 3 Replies View RelatedDrawing disappear after using a dynamic block's stretch parameter?
I’ve made fairly simple dynamic blocks with lines or leaders that can be stretched and some attribute text. After moving the stretch grip of the block the block will disappear. If I then do a regen the entire drawing disappears. But it seems to be only a graphical glitch based on the fact that I can then save the disappeared drawing, reopen it and everything is up to date. I can even see my devious little dynamic blocks. But of course if I try to edit them everything will disappear again.
issues switching layout tabs by clicking on the tabs?
Occasionally, clicking the Model or other layout tab results in no action, as if I'm not clicking on it.
All other controls (within and external to C3D) function normally so it's not a mouse hardware issue.
It will usually correct itself if I "restore down" the main application window, then maximize it again.
The -layout command is a workaround too.
I have successfully created the ribbon tab in Autocad2010 and its load on start up of Autocad. When i change my workspace my ribbon tab disappear is there any way i can make my tab available in all workspaces.
I am not using CUI Customization.
A friend updated his 2013 AutoCAD software to 2014 and now his ribbon and workspaces(custom and default) have disappeared in his 2013 version
View 9 Replies View RelatedWe would like to have everyones workspaces on each computer. So if I have a problem with my computer and Bob is gone, then I can work on Bob's computer with my workspace. Then Bob can come back and switch back to his workspace.
Where do I find the workspace, so I can copy it to the other computers?
I have been asked to do a workshop away from our offices and have been issued with a laptop.
My only issue is that I would like to copy all my settings, workspaces (including toolbars), plotter settings and drawing template files (.dwt) files from my desktop to the laptop.
I tried to create a new workspace, and it was sort of working where I could switch between my custom workspace and the original 2 or 3 Autocad workspaces. Then I think I loaded a menu and the other (original work spaces) have disapeared. How to restore these without doing a re-install?
View 2 Replies View RelatedI have my workspace saved, but everytime I open AutoCAD Architecture, all my tool bars are messed up again. What is going on? How can I get it to standarized my work environment?
View 1 Replies View Related