I tried to create a new workspace, and it was sort of working where I could switch between my custom workspace and the original 2 or 3 Autocad workspaces. Then I think I loaded a menu and the other (original work spaces) have disapeared. How to restore these without doing a re-install?
View 2 RepliesI want to move our firm to using a UCS that aligns with the viewport.
However my hesitation has always been that World does not seem to restore to the original coordinates.
We do survey drafting and the map grid coordinates are critical and we drop in new survey data over the existing on a regular basis.
I tested it again last week but still I cannot insert new data into the same position even after restoring to World UCS. It is consistently about 1.5 units offset from the correct position.
Am I doing something wrong? Should USC World set it back the identical original coordinates such that I could confidently paste with a 0,0 base point and have geometry by in the correct position.
I recently switched from Civil 3D 2012 to 2013 student version because when I initially installed the program I probably messed up some of the settings that I shouldn't have for my entire application. After reinstalling it, I noticed that the program seems to run just fine but the settings for the original file I'm trying to work with remain, such as label settings, linescales, etc.
I want my drawing to match the settings of new drawings when it comes to labels, scales, and anything else I might have changed. Is there a way to apply these settings to my original file? If not, is there a way to at least make sure the label styles can be reset? I don't want any changes to the settings I made to be present in my file.
When I hit "Delete" to delete a photo I usually get to choose between deleting original file or remove from Lightroom 5. Just now, am getting message: "The original file can not be deleted because it is missing or on a volume that is offline." I did not delete the original file. How can the file be returned to "online"?
View 1 Replies View RelatedHere is an image of the broken script editor, Maya works fine I cannot figure out how to restore the script editor
I cannot type in it, I cant copy any script or edit anything.
I'm using Maya 2011, it was working fine up until about a week ago and I dont think I made any changes that would have caused this.
I also have a copy of 2008 installed and 2012 installed the script editor works normal in both, all valid copies, no cracks.
I have unistalled and re-installed 2011 several times, replaced preference folders, deleted them, replaced them with my working user preferences in both 2008 and 2012 and no luck, so I dont think it has to do with those files.
I'm in school and we have specific plugin that has not been updated for 2012 so I cannot get my animation tools to work with 2012 until they do an update. (I've tried working around that and moving the plugins but I'm not a hacker/programer/coder so just moving the plug-in to the correct 2012 folder didnt work)
How to restore the script editor to its original state? Uninstall and re-install did not work.
I tried creating a custom workspace and was able to do so (without any modifications) but when I was in that workspace, and loaded an old menu, it wiped out all the default workspaces. where / how these default workspaces are stored, or how to upload all my old menu stuff without going through a tedious cui mod?
View 3 Replies View RelatedHow do you restore the original color to a faded photo?
View 1 Replies View Relatedby mistake I imported (moved) several AVI and MPEG videos into a specific folder that I inteded to use as backup for one of my relatives.
Problem is that my original folders, where I stored these videos, along with specific names regarding genre and/or subject were left intact, with nothing inside them.
I am trying to find a way to "revert" the import process and send those files back to where they belong.
Bristle brushes have an option near their size sliders named "restore to original size" ... but for some brushes, this option is resetting brushes to another size other than the original size appearing on the brush swacthes.
View 1 Replies View RelatedHow do I go about restoring, repairing or fixing the default materials and appearances that come installed with Inventor Pro 2013? I have a stand-alone single seat installation. SP 1.1 has been installed.
I tried to create a custom library of materials and appearances by making a copy of InventorMaterialLibrary.adsklib and renaming it. I then added new materials. Depending on project, I get nag messages regarding template styles in conflict with the library styles. I'm also getting message warning me that the InventorMaterialLibrary can't get loaded.
It is my intent to create a custom materials and appearances library that mimics the as installed InventorMaterialLibrary plus some additional materials and appearances. The custom library and appearances need to be available to all NEW projects and MAY be added to existing projects without getting the nag message about style conflicts.
I'm also seeing a behavior where the default appearance changes from standard light gray to the first appearance listed in the Autodesk Appearance Library, the 1.5 inch blue tile. I suspect that's the reason I'm getting the nag message. How do I fix this? How do I prevent this from happening in the future?
1) Restoring default as installed material and appearance libraries
2) Creating a custom materials and appearance library to contains ALL items found in the InventorMaterialLibrary plus new materials and appearances
3) Preventing nag style conflict messages
4) Preventing the default appearance of light gray to change to the 1.5 inch blue tile
The machine I'm currently using needs to be ready to go in the morning.
Product Design Suite Ultimate 2012, 2013 & 2014
I am attempting to update a section and the program hangs at message "Missing double in restore file". this is becoming critical for a particular project
View 1 Replies View RelatedThe minimize, restore down, & close icons keep disappearing from the upper right hand corner on my current drawing file in 2013 LT. They will reappear once I re-zoom the drawing. Is there any way to keep these icons on the screen at all times?
View 2 Replies View RelatedI am trying to use the command PASTEORIG and it does not work for me in AutoCAD 2013 or Civil 3D 2013. Is this a known issue with a fix or am I missing something here?
I know for the longest time to paste to original cooridinates you had to select an object and right click and paste by using the menu. I also used to create a keyboard shortcut that let me use Ctrl+Shift+V, but now these workarounds do not work either. It echos the command on the command line, but does nothing, not even a returned error.
This is a pretty significant issue when working in the Civil field.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
I am trying to teach myself how to use 3D and when trying to chamfer my objects, the chamfer works, but it leaves the original lines.
I have it set to TRIM under the CHAMFER command. My TRIMMODE is set to 1. I don't know what else to do.
I just installed my Smoke2013 SP2 yesterday, and today I want to restore my project. From Mr. Grant Kay tutorial, I saw there's restore button once he double click the restore folder. But I can't see that Restore button.
I attach the snapshot of mine.
I am working with surveying points and what I used to do was insert the dxf file containing the points to my drawing and they would be inserted with their correct scale. However, now in AutoCAD 2013, when I insert them they are in a different scale and I must adjust them. Is there anyway to have their original scale carry over in 2013?
View 4 Replies View Relatedcatalogs, I got error message about getting current drivers for hard drive. My hard drive is Western Digital which is supported by Windows 7.
View 2 Replies View RelatedMy radius and diameter dimensions keep jumping from my original line to another, see attached
View 1 Replies View RelatedI have a new computer and want to move the databse catalog over. I backed up in PSE 9 to an external hard drive. I connected to HD to the new computer and tried a resotre catalog. I chose "New Location" since I was going from XP to Windows 7 and was unsure if there would be a conflict with file locations. I also chose "Restore Original Floder Strucure". Very quickly I recieve an error message "Could not restor file .xml". I have run Restore Catalog several times and each time a DIFFERENT FILE receives the error message. I then disabled Norton Anti Virus Auto-Protect. I then disabled several programs running in the background. Same problem. I then copied the Backup Catalog to the new computer and tried to Restore it from there. Same Problem. I have now run a Repair Catalog on the original file. PSE states there is no error. I want to purchas PSE 11, but wanted to install/restore the database with the same version 9 first.
View 11 Replies View RelatedI have successfully created the ribbon tab in Autocad2010 and its load on start up of Autocad. When i change my workspace my ribbon tab disappear is there any way i can make my tab available in all workspaces.
I am not using CUI Customization.
A friend updated his 2013 AutoCAD software to 2014 and now his ribbon and workspaces(custom and default) have disappeared in his 2013 version
View 9 Replies View RelatedWe would like to have everyones workspaces on each computer. So if I have a problem with my computer and Bob is gone, then I can work on Bob's computer with my workspace. Then Bob can come back and switch back to his workspace.
Where do I find the workspace, so I can copy it to the other computers?
I have been asked to do a workshop away from our offices and have been issued with a laptop.
My only issue is that I would like to copy all my settings, workspaces (including toolbars), plotter settings and drawing template files (.dwt) files from my desktop to the laptop.
Is there a setting for extruding polygons so it doesnt leave the original polygon.
When i extrude a polygon into a 3D solid, it extrudes fine but it also keeps the original polygon which means i have to delete it?
Every time I switch from my "Civil3d" workspace to "3D Modeling" and back again, all my toolbars disappear. Not the end of the world but certainly a pain in the butt.
View 4 Replies View RelatedI have my workspace saved, but everytime I open AutoCAD Architecture, all my tool bars are messed up again. What is going on? How can I get it to standarized my work environment?
View 1 Replies View RelatedWhen I created our custom profile ".arg" file, with two custom workspaces along with the OTB workspaces. I set the Auto Publish Settings to publish to PDF on Exit. With 50+ users, each can create thier own workspace for thier liking.
I have some users that like the feature, and others that do not. The ones that do not like the feature, want to turn the feature off.
So the question is if, under each individual workspace, we uncheck the Auto Publish feature, then save that workspace, is the feature turn off for JUST that workspace? Or does it cut the feature off for all workspaces?
AutoCAD 2012 / Inventor 2012
I installed AutoCAD 2012 on a 32 bit windows 7 workstation but I received an error message."Cannot find acad.cuix customizastion file".I tried repairing the installation but it couldnt..I tried unistalling but won't uninstall..The machine was running previous versions of AutoCAD.
View 3 Replies View RelatedI have some legacy menus that are quite large. I have tried to create a new workspace, and that seemed to work o.k.
UNTIL I used menuload to try to load the old menu. At the point all the defualt workspaces were wiped out somehow.
I would like to have access to both the default workspaces and then also by switching to a custom workspace, my legacy menus.
Retrieving a list of Workspaces from menu files .cui and .cuix
The function to use is (workspacelist) which returns a list of workspace names, similar to (layoutlist) for retrieving a list of Layout names.
The functionality for extracting "WorkspaceRoot.cui" from .cuix requires copying the .cuix to .zip so that it can be accessed as a Windows compressed (zipped) folder which the Windows object "Shell.Application" provides.
Please rename the attachment to .lsp
I received the following error when I tried to post the .lsp: "The contents of the attachment doesn't match its file type."
When you select the option to apply any changes & overwrite your original photo does the program attempt to try to a default setting to keep the picture approximately the same size as it was before? (assuming that you haven't cropped it) If it doesn't default to a size automatically can is there an option to do so?
View 4 Replies View Related