When I hit "Delete" to delete a photo I usually get to choose between deleting original file or remove from Lightroom 5. Just now, am getting message: "The original file can not be deleted because it is missing or on a volume that is offline." I did not delete the original file. How can the file be returned to "online"?
View 1 RepliesI recently switched from Civil 3D 2012 to 2013 student version because when I initially installed the program I probably messed up some of the settings that I shouldn't have for my entire application. After reinstalling it, I noticed that the program seems to run just fine but the settings for the original file I'm trying to work with remain, such as label settings, linescales, etc.
I want my drawing to match the settings of new drawings when it comes to labels, scales, and anything else I might have changed. Is there a way to apply these settings to my original file? If not, is there a way to at least make sure the label styles can be reset? I don't want any changes to the settings I made to be present in my file.
by mistake I imported (moved) several AVI and MPEG videos into a specific folder that I inteded to use as backup for one of my relatives.
Problem is that my original folders, where I stored these videos, along with specific names regarding genre and/or subject were left intact, with nothing inside them.
I am trying to find a way to "revert" the import process and send those files back to where they belong.
I have a new computer and want to move the databse catalog over. I backed up in PSE 9 to an external hard drive. I connected to HD to the new computer and tried a resotre catalog. I chose "New Location" since I was going from XP to Windows 7 and was unsure if there would be a conflict with file locations. I also chose "Restore Original Floder Strucure". Very quickly I recieve an error message "Could not restor file .xml". I have run Restore Catalog several times and each time a DIFFERENT FILE receives the error message. I then disabled Norton Anti Virus Auto-Protect. I then disabled several programs running in the background. Same problem. I then copied the Backup Catalog to the new computer and tried to Restore it from there. Same Problem. I have now run a Repair Catalog on the original file. PSE states there is no error. I want to purchas PSE 11, but wanted to install/restore the database with the same version 9 first.
View 11 Replies View RelatedI tried to create a new workspace, and it was sort of working where I could switch between my custom workspace and the original 2 or 3 Autocad workspaces. Then I think I loaded a menu and the other (original work spaces) have disapeared. How to restore these without doing a re-install?
View 2 Replies View RelatedI want to move our firm to using a UCS that aligns with the viewport.
However my hesitation has always been that World does not seem to restore to the original coordinates.
We do survey drafting and the map grid coordinates are critical and we drop in new survey data over the existing on a regular basis.
I tested it again last week but still I cannot insert new data into the same position even after restoring to World UCS. It is consistently about 1.5 units offset from the correct position.
Am I doing something wrong? Should USC World set it back the identical original coordinates such that I could confidently paste with a 0,0 base point and have geometry by in the correct position.
Here is an image of the broken script editor, Maya works fine I cannot figure out how to restore the script editor
I cannot type in it, I cant copy any script or edit anything.
I'm using Maya 2011, it was working fine up until about a week ago and I dont think I made any changes that would have caused this.
I also have a copy of 2008 installed and 2012 installed the script editor works normal in both, all valid copies, no cracks.
I have unistalled and re-installed 2011 several times, replaced preference folders, deleted them, replaced them with my working user preferences in both 2008 and 2012 and no luck, so I dont think it has to do with those files.
I'm in school and we have specific plugin that has not been updated for 2012 so I cannot get my animation tools to work with 2012 until they do an update. (I've tried working around that and moving the plugins but I'm not a hacker/programer/coder so just moving the plug-in to the correct 2012 folder didnt work)
How to restore the script editor to its original state? Uninstall and re-install did not work.
How do you restore the original color to a faded photo?
View 1 Replies View RelatedWhenever I tell LR to edit a photo in PS (CS6), I get back a TIFF file that is 10X larger than the orginal RAW file, and I ultimetly delete it to save space (after first converting it to a jpeg). Why doesn't PS do LR style non-destructrive editing, i.e., why not simply return a record of the edits made in a format compatible with LR?
View 8 Replies View RelatedRecently changed file names and now need to revert back to the original file name created via camera. Can this be done in LR 4 or is this info deleted?
View 1 Replies View RelatedI made a dumb mistake when I first started using LR and I thought files once downloaded into the catalogue were saved and accessible. I removed the files from bridge and now I cannot open them in my catalog. My photos will show up in LR, but the message says "cannot open because cannot locate original file"
I can SEE them, I just can't do anything with them. Is there anyway to recover these files?
Lightroom - Can I import RAW files, re-order them, then change the original RAW file numbering?
I used two different cameras and several memory cards to shoot a recent wedding. Unfortunately, the camera's times were one hour different, so the capture time does not order them correctly. Obviously neither does the file name...
Isn't writing metadata to the XMP space of a file (jpeg or dng) altering the file? I assumed that non-destructive meant not changing the original file in any way, and this rewrites the file and thus changes the modification date. And if the Develop settings are included, then doesn't that confuse things as to which version will be displayed by an application that opens it? Do I need to store the original somewhere else? Or am I misunderstanding how this all works?
View 15 Replies View Related I am currently using PC version for Lightroom. All of the photos I am taken are in .RAW format. I want to switch over to a MAC and purchase CS6. What's the best way to transfer the photos I have developed in LR on the PC?
Will the original RAW file be transported and will my changes port over as well? The way I understand LR is that you can develop the image and revert back to the original whenever you want by clicking reset - this removes all changes/edits - is this correct? Just want to make sure all that hard editing work doesn't disappear and I lose images.
The external hard drive with wedding photos was corrupted. I still see the thumbnail in program(LR4) but it will not let me do anything with it. How/where do I use the memory of thumbnail to make a new file so that I can save my marriage?
View 1 Replies View Relatedthis is in regards to a Lightroom 3.5 exported JPG. This was a year ago when I had been told it was best to export files with simple renumbering of them from 1 to x... instead of retaining the original RAW 4-digit file name.
I've currently lost the original files, and need to do a search for them via these 4 digits to see if I have them tucked away in any of my drives. I downloaded a metadata explorer, and it's telling me all the lightroom editing information, and everything else, but somehow does not have the simplest of information — that 4 digit original file name.
Am I grasping at straws or is there likely to be any way to find this information out? I don't work with metadata, so there wouldn't have been any customizations to how Lightroom configures this...
Is there a way to tell whether a DNG is the result of converting a cr2/nef vs. jpeg or tiff? I seem to remember an "original file" field in the metadata in the past.
View 3 Replies View RelatedI imported 900 RAW images from my desktop into Lightroom, edited them, renamed the filename, and exported them into JPGs. Since I no longer needed the RAW images on my desktop I moved them over to an external hard drive. So now the images are still visible in my Lightroom catalog, but there is no photo to back it up since I moved the original files to the external hard drive. After realizing that I exported the images at 150 dpi instead of 300 dpi I need to re-export the images from lightroon at the proper resolution. But since I moved the originals to the external hard drive there is no photo to back it up in lightroom anymore. So I went to locate the files by clicking on the "?" but since I renamed the file when I exported them, the original filename on the external hard drive is now different from the filename in the catalog. Is the only solution to locate the file one by one? Is there any way I can do them all at once even though the original filename is different from the filename in my lightoom catalog? The original filename is still listed in the metadata, but since the originals are missing it can't change it back.
View 7 Replies View RelatedWhen exporting images, how do I export/save all of the original metadata to the file(s) when using LR4?
View 8 Replies View RelatedI have many files which I created by making a copy of the original and editing it. I have the original file with no edit history. The copy which shows the results of the editing is marked as a missing file and the edit history is greyed out. Both file share the same name with the exception that one is a copy. Is there any way to re-link these files? When I try to search for the missing file and point to the original, it tells me that the file is already linked to a file and can't be linked to a second file.
View 2 Replies View RelatedIn LR 2.6, when I imported my images (RAW) I would import keeping the original file number, then I would batch rename and convert to dng after they were already in my catalogue. Since I shoot stock, I keep a meticulous record of what I shoot for metadata and keywording purposes. I notice that when I upgraded to LR 3, my in my existing catalogues/folders the original file names are gone, and just the new custom name & sequencing show up.
Unfortunately, I still have to keyword & metadata tag a lot of images, but now the original in-camera numbering is gone. With my new imports what I did to preserve the original numbering, is to import, do my keywording/metadata, then a batch rename. How to keep both. It is just easier to refer to my notes when I have the original number of the image.
Once changes developed I want to save them onto the original file. I export the selected image (original photo + changes) with overwriting choice but the result file has only the original and not the changes
View 3 Replies View RelatedI accidentally included a file rename when I just imported a batch of several hundred pictures. I violated a rule that I teach my own Lightroom students, and that is to look carefully at the import panel choices before proceeding.
How can I correct this so that the files are named as they originally were? I know how to easily fix the filenames in Windows (using a tool called BulkRename, for example), but then I'd have to "find" each image one-by-one and correctly point to the renamed version. I tried selecting all the images and then using F2 to rename, but none of the templates allow deleting a portion of the filename.
P.S. Here is an example of what I mean:
ON CARD:
IMG_0001.NEF
...
IMG_0300.NEF
WHAT I RENAMED TO ACCIDENTALLY:
IMG_0001 {shot by John Doe}.NEF
...
IMG_0300 {shot by John Doe}.NEF
I cannot seem to exprt my images and retain the orginal jpeg file number once I have watermarked them... I choose the "save with original file number" option in the drop down list but it still exports them with new numbers. How do I keep my original numbers?
View 30 Replies View RelatedHow come the file size when I export from Lightroom is substantially smaller than the original file size? My original image file was 6MB, but when exported from zlightroom the file size for that file is only 2MB. I want to export full size files so that they can be published or enlarged.
View 7 Replies View RelatedAfter editing a photo in an external application, only the original raw file can be seen. The edited photo is hidden, even when searched for by name.
I have been reduced to the following workaround, which has the drawback of deleting all the original raw (.cr2) edits: Edit the photo; edit in external application; save and close. Back in lightroom, delete the raw file (from lightroom only); then close lightroom, reopen it and then at last I can see my edited file. Then I have to re-import the raw file and of course the edits have disappeared. But at least the final result can be seen.
The photos are supposed to be in a stack, but there appears to be a bug in this function because you can only ever see the raw file.
I have been working on a file in photoshop cs5 that had come from lightroom 5.3. This was then saved (automatically becomes tiff file in Lightroom). I then wanted to make some more adjustments to it in lightroom (using local adjustment clarity). I then tried to copy the settings of the adjustment brush from the tiff to the original raw file. This is where it gets very strange. The adjustments are copied but they are rotated ccw by 90 degrees! I can replicate this every time.
View 22 Replies View RelatedI just noticed that some of my photos are missing from the library in lightroom, specifically the original versions of photos that have virtual copies edited in photoshop in folders that have since been synchronized. Weird, and very anoying. The files are still there (in wondows explorer) but when I try to re-import them lightroom doesn't see them, only the PS edited copies (.tif files). I told lightroom to allow duplicates and it sees all the photos in the folder except those missing ones. This does not happen to my PS edited virtual copies in folders that have not been synchronized. It is not a matter of stacking, or at least Lightroom does not think the PS copies are stacked at all so I can't unstack them. How to get them back into lightroom (preferably with the accompanying development settings) and also how to avoid this problem in the future.
PS: I import files from my camcorder using a different program because lightroom does not acknowledge that particular video file format. That's why I have to synchronize some folders and not others.
Is there any way to export LR photosdirectly from LR if the original file has been deleted from Hardrive. If not, can the image from LR somehow still be printed as photos and if so how?
View 6 Replies View RelatedBristle brushes have an option near their size sliders named "restore to original size" ... but for some brushes, this option is resetting brushes to another size other than the original size appearing on the brush swacthes.
View 1 Replies View RelatedIs there any way to force Snapshots and Virtual Copies to read metadata from the original raw file after an update of the same?
I had to change the lens name on some Leica M9 files to correct an operator (me) error, and I did it by editing the exif data with an exif editor and then forcing LR4 to read the metadata from the file. This worked well for everithing but the snapshots and the virtual copies on which the metadata remain as originally registered, unchanged.