Windows 7. AutoCAD Civil3D r13 and 14.
Yes the toolbars are unlocked and even when they are locked using the ctrl key still will not alow me to resize. This used to work but now for some reason will not anymore.
I am getting the following two errors when try to Mapimport either SDF or SHP files. Is there a setting I'm missing?
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
Just downloaded the GENIO and Civil View tools but the installation fails as no application found - is the installer faulty?
View 9 Replies View RelatedI finally cleared enough space on my creaky old PC to install 2013 and once again am having trouble with that CUI.
The ribbon is useless to me, partly because it contains nothing relevent (most of the commands I use are legacy) and partly because this creaky PC can't handle it. My usual workspace is set to toolbars (some custom) and menus.
I exported my workspace from 2012 including all the menus and toolbars.
I imported that cuix file into 2013. Everything is there listed as it should be, but when I select the workspace and click apply I have neither toolbars nor menus showing (well I have a tiny toolbar with just new, open and save on it, and another that appears to be related to survey, but none of the ones I want or need.)
What do I have to do to get my menus and toolbars back? they haven't abolished them completely? This PC cannot handle the ribbon and my every request for an upgrade is denied due to politics.
Every time I switch from my "Civil3d" workspace to "3D Modeling" and back again, all my toolbars disappear. Not the end of the world but certainly a pain in the butt.
View 4 Replies View Related[URL]
Bring that back from the archives... because I am still very fond of redoing hundreds of cross sections because you're incable of redistributing the graphs when a sample line is added to a an existing group... and blow up all of the projections well done.... way to leave out a super critical dynamic component.
PPD E P I C F A I L
There is some unbelievable gaps in the software but how do you let this one go on for so long?
Dell Precision T3500 - Xenon W3550 @ 3.07 (4 core)
Ram @ 12Gb
64bit Win7 Pro
Samsung SSD
NVIDIA Quadro 2000 - Dual Monitors
Cat 6 network with GlobalScape Avail Agent - WAFS
Infrastructure Design Suite Premium and Civil 3D 2012
WS with R2013 & R2014 installed side by side.
R2013 is stating on start up that the Geotechnics module has been loaded and displays the Tab for it.But I haven't installed the Geotechnics module for 2013 yet and it doen't work.
Is there a way to change the default Resize behavior for pipes. I'd like to have it set to crown. I can change it for each pipe but that's gets tiring after a little bit.
HP 4600 4 GB Ram
Intel Core 2 Duo 2.66
ATI FireGL V5600 (8.391.2.1100)
Windows XP PRO (SP 3)
2008; (All SP) LDT, MAP 3D
2009; Civil 3d 2009 Update 1 Version 2, Map 3D, Raster
URL....Constantly in 12 and 09 I have had issues snapping to endpoints since the changes to osnaps in ACad itself. It doesn't seem the ramifications were followed thru to ACA.
They seem to have addressed some issues in 12 but not all and often it dails completely.As osnaps is a basic functionality I think Adesk needs to get this working properly and as a fix for 10,11,12 and 13.
Autodesk Inventor 2013 won't let me create a project. The specified workspace G:Design does not exist.
This can result in unexpected default file locations.
Do you want to create the workspace?
and when i hit OK
Fail to create workspace G:Design.
You may need to change it to other place
I'm running Design Suite Ultimate 2012, windows 7 64bit, I can launch IV 2012, but I can't seem to see my tool bars...
View 9 Replies View RelatedI am wanting to save all of my menus, toolbars, templates etc. so I can put them on my new computer. I am using autocad LT 2010. I have looked everywhere for the files on my C drive and can't find them anywhere. On other versions I could copy them to a flash drive and then onto another computer. I tried going through the user interface but I couldn't get anything to save. It did make a .cui file but I didn't know where to copy that to on the new computer.
View 1 Replies View RelatedMy autocad toolbar are not showing......
I have checked ctrl+0 option.......But this is not working and my toolbar are not showing
In the attached sample file if you edit the sketch in the first surface feature and change the dimension of 600 to 700, both the patch and loft features fail. It seems to be the curved edge that is the problem in both cases.
I cant see anything wrong with either way of modelling this so assume its a bug.This causes other problems in my real model with parts that reference these types of surfaces falling apart further down stream and is wasting heaps of $$$.
When I try to menuload a .cuix on a machine that has UAC set to high, The menu group comes in, but the toolbars associated with it do not. I know this sounds like AutoCAD support but it is .net related as the .cuix is loaded through .net. The pull down appears OK.
If I manually set UAC to it's lowest setting then they come in, is there a reason for this?[URL]
opened autocad 2014 lt today and all my toolbars are gone, as well as alot of my shortcuts.
View 3 Replies View Relatedas title says. using acad 2010 in classic mode. had to switch to ribbon but i dont like it as much
View 5 Replies View RelatedI need to add toolbars in 2d annotation ???
View 2 Replies View Relatedas above.....desperately trying to find them.
still got dashboard, palettes, design center and properties but absolutely NO toolbars.
Is it possible to put only specific command buttons from the toolbars on my interface while excluding others.
View 4 Replies View RelatedI have just downloaded trial verion of AutoCAD for Mac, onto new Macbook Pro.
The two palettes are there on the screen left hand side, but I cannot find the classic toolbars, which I cannot work without.
Just started new job, with PC running ACAD2010. My toolbars appear blank, with no icons. How do I get the icons to show?
View 4 Replies View RelatedI'm about to throw a chair through a window!!!! I just simply and accidentally closed all of my toolbars... just "un-checked" them in the general gray-area right click drop down.....couldn't figure out how to get them back..... read a few cadtudor posts.....started doing advanced stuff like "menu load" and "toolbars load and reload"..... now I'm completely messed up: no menus at all and no toolbars!!
View 4 Replies View Relatedinsert dwg view in model space with Inv 2014.
I try here and i receive this error " invalid input for request" If i try with 2013 it's work well.
INV PRO 2014
MS Office 2007
Win 7 pro, core i7 950, asus P6T WS
nvidia Gforce GTX 295
WD caviar black 500Go
WD caviar black 1To
I don't understand why this Fillet would fail when it was fine before I changed the length of the edge. See before and after shots attached..
The geometry/features that are used to create the fillet are exactly the same.
My cuix file that I have created won't load automatically anymore.
View 3 Replies View RelatedI have a dual monitor setup and I maximize acad2011 on monitor 2 and have my toolbars on monitor 1.
I like to have my toolbars floating, but justified to the side with the 'gap' between the montiors so the tool bars fly out and I can see my email or reference docs or whatever on monitor 1 also. Sadly every time I close and re-open acad my toolbars re-justify to the center of monitor 1. I've tried unlocking and locking but that doesn't work. I am using the 'better', errr, excuse me, 'classic' workspace.
I made some toolpallets and i want them to share with my collegas. I know that i can export them amd then import manualy, but is it possible to set the files of the toolbars on the server so if i change anything everybody has the same?
I dont want to import and export them everytime i change something.
I have the Layer Property Manager and Properties toolbars docked on the left edge of my screen, with the Ribbon vertically between them and the drawing display. I sometimes 'overshoot' when going for a command from the ribbon and the toolbars pop-up immediately so that I then have to move the cursor back into the drawing space and wait for the toolbar to collapse before I can pick the command (more carefully). Is there a way of setting a delay on the tool bars appearing?
View 9 Replies View RelatedI can't see any of the inventor toolbars anymore.
if i would still have the Quick Acces Toolbar this wouldn't be a problem but that one is also gone.
For years we've had a line type change toolbar that worked just fine. This years update may have changed something that the old macro is missing or doesn't need anymore because none of the commands work anymore. One of the macros reads:
^C^Cselect chprop;previous;;ltype;dashed;ltscale;4;;
