AutoCad :: Lost All Toolbars And Can't Get Them To Open Again
Oct 13, 2011as title says. using acad 2010 in classic mode. had to switch to ribbon but i dont like it as much
View 5 Replies
ADVERTISEMENT
AutoCad :: Lost All Menu's And Toolbars
Mar 25, 2011I'm about to throw a chair through a window!!!! I just simply and accidentally closed all of my toolbars... just "un-checked" them in the general gray-area right click drop down.....couldn't figure out how to get them back..... read a few cadtudor posts.....started doing advanced stuff like "menu load" and "toolbars load and reload"..... now I'm completely messed up: no menus at all and no toolbars!!
View 4 Replies View RelatedAutoCAD Architecture :: Lost Toolbars For Drawing And Modify At Top Of Page
Oct 19, 2011I have lost my toolbars for drawing and modify at the top of the page. How do i get them back.
View 3 Replies View RelatedAutoCAD 2013 :: Toolbars Turn Off Upon Open With Icon - No P In Shortcut
Oct 16, 2012Every time I open ACA 2013, my toolbars that I have loaded turn off. Well currently only the layers toolbar remains, my custom toolbar and the properties toolbar turn off every time I open ACA with the icon or the exe file itself. If I open a drawing file the toolbars seem to remain. I also just installed the service pack, no change.
View 1 Replies View RelatedAutoCad :: Lost Ability To Open Drawings?
Apr 5, 2013But, I've lost the ability to open drawings with the traditional "tree" type search.... Something like Windows Explorer. Just before this happened, I had blown up a drawing by, apparently, importing one too many iges files. Got a message that Autocad had an error and was shutting down. Now, when I hit file/open, I get nothing but the command line asking me to enter the drawing path.
View 5 Replies View RelatedGIMP :: Open PSD File It Breaks And Color Is Lost
Oct 10, 2012When I try to open a PSD file in GIMP, it breaks - the color is lost.
Here is what it should look like: [URL]....
This is how it appears in gimp: [URL].....
Here is the original, how to convert it to a format that actually works??? [URL].....
GIMP :: Lost Cursor When Open Create New Image
Jul 29, 2013Gimp 2.8, Windows 7
After I open a create new image, the cursor disappears and the last tool I choose (rectangle...) appears and the cursor (arrow) disappears. Is this standard or is there a way to exit from the tool box and use just the arrow cursor?
AutoCAD Inventor :: Can't See Toolbars
Jul 1, 2011I'm running Design Suite Ultimate 2012, windows 7 64bit, I can launch IV 2012, but I can't seem to see my tool bars...
View 9 Replies View RelatedAutoCAD LT :: Where Are Toolbars Saved
Sep 30, 2011I am wanting to save all of my menus, toolbars, templates etc. so I can put them on my new computer. I am using autocad LT 2010. I have looked everywhere for the files on my C drive and can't find them anywhere. On other versions I could copy them to a flash drive and then onto another computer. I tried going through the user interface but I couldn't get anything to save. It did make a .cui file but I didn't know where to copy that to on the new computer.
View 1 Replies View RelatedAutoCad :: Toolbars Are Not Showing
Sep 12, 2011My autocad toolbar are not showing......
I have checked ctrl+0 option.......But this is not working and my toolbar are not showing
AutoCAD .NET :: UAC Stops Toolbars Loading?
May 30, 2012When I try to menuload a .cuix on a machine that has UAC set to high, The menu group comes in, but the toolbars associated with it do not. I know this sounds like AutoCAD support but it is .net related as the .cuix is loaded through .net. The pull down appears OK.
If I manually set UAC to it's lowest setting then they come in, is there a reason for this?[URL]
AutoCAD LT :: Shortcut And Toolbars Are Missing
Jul 8, 2013opened autocad 2014 lt today and all my toolbars are gone, as well as alot of my shortcuts.
View 3 Replies View RelatedAutoCAD 2013 :: Add Toolbars In 2D Annotation?
May 2, 2012I need to add toolbars in 2d annotation ???
View 2 Replies View RelatedAutoCad :: Crashed And Toolbars All Missing?
May 6, 2013as above.....desperately trying to find them.
still got dashboard, palettes, design center and properties but absolutely NO toolbars.
AutoCad :: Command Keys In Toolbars
Jun 12, 2012Is it possible to put only specific command buttons from the toolbars on my interface while excluding others.
View 4 Replies View RelatedAutoCad 2D :: Missing Toolbars On 2012 For Mac?
Sep 25, 2011I have just downloaded trial verion of AutoCAD for Mac, onto new Macbook Pro.
The two palettes are there on the screen left hand side, but I cannot find the classic toolbars, which I cannot work without.
AutoCad 2D :: How To Get Icons To Show On Toolbars
Jan 16, 2014Just started new job, with PC running ACAD2010. My toolbars appear blank, with no icons. How do I get the icons to show?
View 4 Replies View RelatedAutoCAD 2010 :: Can't Lock Floating Toolbars
Apr 10, 2012I have a dual monitor setup and I maximize acad2011 on monitor 2 and have my toolbars on monitor 1.
I like to have my toolbars floating, but justified to the side with the 'gap' between the montiors so the tool bars fly out and I can see my email or reference docs or whatever on monitor 1 also. Sadly every time I close and re-open acad my toolbars re-justify to the center of monitor 1. I've tried unlocking and locking but that doesn't work. I am using the 'better', errr, excuse me, 'classic' workspace.
AutoCAD 2013 :: Possible To Set Files Of Toolbars On Server
Jan 9, 2013I made some toolpallets and i want them to share with my collegas. I know that i can export them amd then import manualy, but is it possible to set the files of the toolbars on the server so if i change anything everybody has the same?
I dont want to import and export them everytime i change something.
AutoCAD LT :: Setting Delay For Docked Toolbars
Dec 13, 2011I have the Layer Property Manager and Properties toolbars docked on the left edge of my screen, with the Ribbon vertically between them and the drawing display. I sometimes 'overshoot' when going for a command from the ribbon and the toolbars pop-up immediately so that I then have to move the cursor back into the drawing space and wait for the toolbar to collapse before I can pick the command (more carefully). Is there a way of setting a delay on the tool bars appearing?
View 9 Replies View RelatedAutoCAD Inventor :: Toolbars Not Visible In 2008
Nov 12, 2013I can't see any of the inventor toolbars anymore.
if i would still have the Quick Acces Toolbar this wouldn't be a problem but that one is also gone.
AutoCAD LT :: Changing Line Type Toolbars
May 17, 2012For years we've had a line type change toolbar that worked just fine. This years update may have changed something that the old macro is missing or doesn't need anymore because none of the commands work anymore. One of the macros reads:
^C^Cselect chprop;previous;;ltype;dashed;ltscale;4;;
AutoCAD 2013 :: Customize Toolbars To Match Old Set Up?
Jan 22, 2013I have just updated to 2013 LT. I want to customize my toolbars to match my old set up but once I've spent ages moving tools to new folders and arranging them how I like it, I close Autocad then open it again and it reverts back to default so all that time editing folders etc is wasted!!
View 2 Replies View RelatedAutoCAD LT :: Cardinal And Layer Property Toolbars
Jan 8, 2013We have the Cardinal Toolbar and the Layer Properties Toolbar (one that allows you to toggle between layer groups ... for example floor levels) installed on our AutoCAD LT 2006 software for a PC. We are looking to purchase AutoCAD LT 2013 for a MAC. We have downloaded the trial version, and cannot find these toolbars on the new version. Our files are set-up to function with these toolbars. Is there any way to download these toolbars for the new version? If not, are there commands we can use to change the cardinal direction in model space and to toggle between floor level layers (groups?)?
View 1 Replies View RelatedAutoCAD 2013 :: Blurred Menu Or Toolbars
Nov 1, 2012A client is experiencing a problem whereby when he runs his software,Inventor Professional-Autodesk Product Design Suite 2013, he gets the blurred toolbars as in the attachment.
View 1 Replies View RelatedAutoCAD 2010 :: Using Toolbars Moving To Ribbon
May 22, 2012I'm old school trying to learn new school! I love using my custom toolbars and abbreviations from the keyboard for calling my autocad commands. I am in the process of learning the uses of the ribbon. I have always used the acad menu, then loaded "partial" custom menus. Is this still possible using the ribbon? Not sure how to do this. I like keeping the custom stuff separate, because we have 5 users with a standard company menu and I like the idea of always going back to the original menu. I suppose my question is how do I use the ribbon, and continue to use my partials also
View 7 Replies View RelatedAutoCad :: Editing Existing Toolbars And Buttons
Mar 24, 2012I am having trouble editing existing imported toolbars. Also, I cannot retrieve my custom toolbars into 2012. When I convert older menus (mnu) into 2012 the tool bars all have question marks on them, and my custom toolbars are not listed. I cannot go into CUI customization and click on a button to edit it's command and or icon. The older version of cad is not on my new system so I cannot use the migration tool.
View 9 Replies View RelatedAutoCAD Civil 3D :: Toolbars Fail To Resize?
Jul 2, 2013Windows 7. AutoCAD Civil3D r13 and 14.
Yes the toolbars are unlocked and even when they are locked using the ctrl key still will not alow me to resize. This used to work but now for some reason will not anymore.
AutoCAD LT :: Command Line And Toolbars Disappearing
May 5, 2013I'm using AutoCAD 2013 LT. Until recently it has been runinng fine, but now I am finding that when I start up AutoCAD all the toolbars have dissapeared and I have to reload them all again. I know you can set up your own workspace which would make it easy, but they shouldn't be dissapearing in the first place.
On top of this there is no longer the prompt showing up next to the curser which tells you distance, angle, commands etc. I can't seem to find where to turn it off/on. I would like it back. I don't know where it went in the first place!
My final point is the command line. In previous versions the command line sat neatly at the bottom of the screen and you could read the command you were entering and previous commands. Now, it is there, but it does not sit properly in the screen and does not show the command i am typing in because it does not show properly. I can move the command line out but then it is in the way.
AutoCAD 2010 :: Doesn't Save Changes To Toolbars
Aug 5, 2010we are using A2011, Classic workspace (toolbars) and i have partial menus loaded (custom toolbars).
If i try to add a new toolbar to a custom toolbar, or to add buttons to an existing one, the changes are not saved when i close the customization window.
AutoCAD 2013 :: Hiding / Removing All Toolbars
Jun 26, 2013I have 1 user who refuses to learn the ribbon and turns every toolbar known to man on.
It has been suggested that I could remove his ACAD.cui (menuload, then unload). Is this the best way to make sure he cannot use them at all and is forced to learn the ribbon?
Another option I have is to simply click the View tab and uncheck the User Interface panel, but he could just as easily turn it back on as soon as I walk away, or even better he could turn on the Menu Bar from the quick access toolbar and add them through the View pulldown menu or just type in CUI and turn toolbars on that way also.