AutoCAD LT :: Setting Delay For Docked Toolbars
Dec 13, 2011
I have the Layer Property Manager and Properties toolbars docked on the left edge of my screen, with the Ribbon vertically between them and the drawing display. I sometimes 'overshoot' when going for a command from the ribbon and the toolbars pop-up immediately so that I then have to move the cursor back into the drawing space and wait for the toolbar to collapse before I can pick the command (more carefully). Is there a way of setting a delay on the tool bars appearing?
View 9 Replies
ADVERTISEMENT
Oct 24, 2012
i am getting a message when i click on something from my tool palette saying that it does not display when it is docked and closed. how do i undo this so i can use objects from the tool palette. how do i "unlock" it?
View 9 Replies
View Related
Oct 3, 2011
I created a paletteset with MinimumSize, it works fine when the paletteset is not docked to anywhere. However the MinimumSize doesn't seem to work at all. I tried to dock it to left, then I can drag the edge to really narrow.
View 1 Replies
View Related
Sep 25, 2008
way to speed up the time it takes for a docked panel (like Properties or Xrefs) to retract faster after the cursor has left the panel?
View 4 Replies
View Related
Oct 17, 2011
I had the properties window docked on the right side of my screen before I reinstalled ACAD LT 2009. Now I can't figure out how to get it back.
View 9 Replies
View Related
Apr 30, 2012
if the command line is docked and you hit F2 to bring up the text screen,
there is no word wrap.
e.g.
type (entget (car (entsel))) pick an object, and then F2 for text screen.
The result is all on one line and you can only view it by scrolling sideways.
The same happens when you list a few lines of Mtext.
If the command line is not docked there is no problem.
View 9 Replies
View Related
Jun 9, 2011
I lost the text window that is normally docked on the bottom of the AC screen. I searched and found that F2 brings it up, but I can't find how to have it permanently docked in the bottom left hand corner, where it normally resides. I'm using AutoCad 2002.
View 5 Replies
View Related
Oct 16, 2008
I'm using CS3 on Windows. When I minimize a file it automatically goes to the bottom of the screen. How do I get a minimized file to stay where I place it on the screen so that everytime I close the file it will go to the designated place I put it?
View 1 Replies
View Related
Aug 4, 2012
automatic snapping to dock my photos. before if I wanted to compare my exposures, no problem. just open images and spread them out. easy. now, not for a useful reason it snaps and docks. then by the time I disassemble this, and screenshot the comparision to send to red giant to report a bug, image 3(after) overlaps the other two(before, MBL) in the screenshot.
View 6 Replies
View Related
May 13, 2012
In Photoshop CS6 if one wants to use floating document windows (I don't care for tabs) the opened image cannot be moved around the interface. If you drag the image the document window snaps back to where you moved it from plus some amount to the left. Eventually if you keep trying to drag it to a new location it will move all the way to the left side of the screen and will snap back there when you try to move it. I often like to have several images up at once as I do comps and I am very disappointed that such a major interface issue made it through testing un-noticed.
This happens on both my laptop PC and my Desktop. Both Windows 7 64bit pro machines and each have 8G of ram. Desktop has Nvidia graphics and the laptop has Intel graphics. Happens in both 32 and 64 bit versions of windows.
View 5 Replies
View Related
May 30, 2011
I was experimenting a little bit with the dockers at the right side of the workspace of Corel Draw X5 and now for some reason when I go to "Window" and select a new docker to open, the new docker appears not nested with the rest as it did before, but as new floating window so I have to add it to the rest as a tab manually which is not handy. Up to now each new docker would appear already nested. This is annoying because I really liked the way the dockers appear nested in tabs in X5.
How I can make the dockers appear again tabbed once I open them?
View 3 Replies
View Related
Sep 4, 2012
Best practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
View 1 Replies
View Related
Jan 16, 2013
I have a bunch of students who load tool bars and dock their command line, but as soon as they close AutoCAD and reopen, the command line is floating again and the tool bars are missing. Saving and importing a profile does not seem to work!
View 1 Replies
View Related
Oct 18, 2007
photoshop CS2 stoped displaying the red channel correctly on all images. The red channel displays very muted color.
After deleting all preferences of CS2, cleaning out the Windows registry, and upgrading to CS3 the problem still remains.
In CS3 however, the color shift goes away if I drag the image outside of Photoshop's main window.
I have a screenshot of this, http://www.miats.com/tmp/PhotoshopIssue.jpg
Photoshop states that both of the large images are solid R:255 G:0 B:0. However, after print screening the images and pasting them back into Photoshop, it shows that the one on the left is actually R:201 G:88 B:34.
The same thing happens for green and blue as well, though the difference is much less dramatic.
I don't remember changing any settings and my laptop (Win XP, CS2) does not have this problem when loading the same images.
My computer is running VISTA 32bit with 3GB of ram. The graphics card is a NVIDIA 6800.
View 1 Replies
View Related
Jul 1, 2011
I'm running Design Suite Ultimate 2012, windows 7 64bit, I can launch IV 2012, but I can't seem to see my tool bars...
View 9 Replies
View Related
Sep 30, 2011
I am wanting to save all of my menus, toolbars, templates etc. so I can put them on my new computer. I am using autocad LT 2010. I have looked everywhere for the files on my C drive and can't find them anywhere. On other versions I could copy them to a flash drive and then onto another computer. I tried going through the user interface but I couldn't get anything to save. It did make a .cui file but I didn't know where to copy that to on the new computer.
View 1 Replies
View Related
Sep 12, 2011
My autocad toolbar are not showing......
I have checked ctrl+0 option.......But this is not working and my toolbar are not showing
View 9 Replies
View Related
May 30, 2012
When I try to menuload a .cuix on a machine that has UAC set to high, The menu group comes in, but the toolbars associated with it do not. I know this sounds like AutoCAD support but it is .net related as the .cuix is loaded through .net. The pull down appears OK.
If I manually set UAC to it's lowest setting then they come in, is there a reason for this?[URL]
View 1 Replies
View Related
Jul 8, 2013
opened autocad 2014 lt today and all my toolbars are gone, as well as alot of my shortcuts.
View 3 Replies
View Related
Oct 13, 2011
as title says. using acad 2010 in classic mode. had to switch to ribbon but i dont like it as much
View 5 Replies
View Related
May 2, 2012
I need to add toolbars in 2d annotation ???
View 2 Replies
View Related
May 6, 2013
as above.....desperately trying to find them.
still got dashboard, palettes, design center and properties but absolutely NO toolbars.
View 4 Replies
View Related
Jun 12, 2012
Is it possible to put only specific command buttons from the toolbars on my interface while excluding others.
View 4 Replies
View Related
Sep 25, 2011
I have just downloaded trial verion of AutoCAD for Mac, onto new Macbook Pro.
The two palettes are there on the screen left hand side, but I cannot find the classic toolbars, which I cannot work without.
View 4 Replies
View Related
Jan 16, 2014
Just started new job, with PC running ACAD2010. My toolbars appear blank, with no icons. How do I get the icons to show?
View 4 Replies
View Related
Mar 25, 2011
I'm about to throw a chair through a window!!!! I just simply and accidentally closed all of my toolbars... just "un-checked" them in the general gray-area right click drop down.....couldn't figure out how to get them back..... read a few cadtudor posts.....started doing advanced stuff like "menu load" and "toolbars load and reload"..... now I'm completely messed up: no menus at all and no toolbars!!
View 4 Replies
View Related
Jan 26, 2013
In AutoCad LT 2013, on Windows 8, I experience a 1/5 - 2 second delay afte 'enter' on a Copy command. The enter may be used in either right-click command or spacebar modes. This is the only delay I am experiencing in any command used so far. Other than that, the 2013 is flawless in Windows 8.
View 1 Replies
View Related
Feb 4, 2013
I experience a delay when i want to select a line or curve in a scetch, part or assembly. Normally when you move the cursor over a line it highlites red within a fraction of a second. Now it takes 3 or 4 seconds to be selected.
is it a wrong setting or a bug. Never had the problem before. Not in 2012 or in 2013.
View 1 Replies
View Related
Nov 29, 2011
Using ACA 2012, I get a delay when I switch drawings, either using ctrl tab or the mouse. The ACA pauses for a moment. I also get the same issue going from model space tab to a paper space layout tab. Running Windows 7 Pro on a Xi machine Intel i5 2.8 ghz with 4gig of memory and a geforce 9800 GT video card. I didn't have this with ACA 2008 prior to updating.
View 2 Replies
View Related
Mar 15, 2013
About six months ago, when I ctrl/tab between drawings, it started having a five second delay for it to "reset" itself. Irritating as all get out. Nothing had changed on my CPU, just started doing this out of nowhere. My boss, who has exactly the same cpu / software/everything, is not experiencing this. I am using 2012 full version.
Another question, my co-worker had 2012LT on his laptop and when he is measuring a distance and take off either the ortho or snap, the text box on teh screen showing the distance disappears.
View 5 Replies
View Related
Mar 22, 2012
why pasting details between drawings and blocks, the software or hardware, hangs for what seems to be an age, but is probably more like 10-15 seconds but over a day this is costly.
View 5 Replies
View Related
