When i type in the Geomap command, i get the option for Aerial, Hybrid, Road, off. No matter which selection i make, the imagery will not load. I go to someone elses machine and open the same drawing, the imagery loads.Am i missing a setting somewhere?
View 4 RepliesWhen I insert a location in CAD2014, there is a dialog for me to chose the position, the default coordinate is WGS84, and of couse there is a list for options. but if there still have no system I need. how can I add the one into this list ?
View 4 Replies View RelatedI tried applying this flag to one of my commands for Autocad 2006. The documentation states that it forces users to enter the full namespace of the command in order to invoke it.
The problem is that even after defining the local, global, and group names I can't get the command to load. I've tried every possible namespace I could think of when entering the command into Autocad. The command works if I do not apply the flag, and typing GroupName.GlobalName into the command line also works - unless I add the Undefined flag.
[CommandMethod("group1", "cmd1", CommandFlags.Undefined)] _
Public Sub Test()
End Sub
i inserted an areas image with geomap but as i zoom cloce the image disapears and i get a tile with a white image of a camera. can i disable it? it is very annoying.i dont care if i loose ressolution if i get closer .why autodesk did that?
View 3 Replies View RelatedWith other GIS software, ESRI and Manifold, I can get images for an area using online sources.I understand someone wrote the tools to make that happen, but can this be done for Map too?
So I don;t want to download images first, then pull into acad, I want them to download straight from GE. URL....
We have a map created for our city with all our utilites, zoning, etc. plotted out and we have some very old aerial imagery attached to it.
Just a few months ago, Pictometry flew some new hi-res imagery for me. I have individual ortho tiles and one large ortho-mosaic. When I try to install the imagery, it doesn't line up anywhere close to where it should be on the map. How can I go about getting my imagery and my map lined up?
I have a local drive that multiple people have access to and has hundreds of georeferenced images on it. I have an AutoCAD drawing with a shapefile of all the imagery frames with object data attached to the frames. There is way too many images to have them all in the drawing and causes the drawing to be slow and sometimes crash. What I want to do is be able to select the frame or frames of the images I want to import based on the object data frame name and import them. Where do I start?
View 2 Replies View RelatedI am starting a class this semester which is essential photoshop basics, my instructor has given us some tutorials to "play" with and get comfortable and told us to us use "stock" images from the net.
My question is this , where can I get free stock images of female models posing in various styles (nothing of an offensive nature) ? I am going to attempt a very basic fantasy art work using "light and darkness" or "good and evil" that sort of thing as the theme.
In the 3d Materials Panel in Adobe Photoshop Extended CS6, the REPLACE TEXTURE and LOAD TEXTURE commands for the 3d materials seem to create a single "smart" texture that all other textures created via the "replace/load texture" commands link to.
For instance, to texture a sphere using a Photoshop file, I first created a file called "horizontal stripes for 3d peel.psd" and saved it on my desktop. I went to the Materials Panel>Diffuse>(Clicked icon to right of "Diffuse") and chose "Load Texture>"horizontal stripes for 3d peel.psd," to apply it to my sphere. I then edited this diffuse file by right-clicking the icon to the right of "Diffuse," choosing "Edit" and adding a color layer at the top of the layer stack, then saving (not saving as) and closing the Diffuse .PSB smart object file.
I then loaded a texture to the Opacity material of my sphere using the same Photoshop file on my desktop called "horizontal stripes for 3d peel.psd", going to Materials Panel>Opacity>(Clicking the icon to the right of "Opacity") and choosing "Load Texture>"horizontal stripes for 3d peel.psd," When I opened this file to edit it by right-clicking the icon to right of "Opacity" and choosing "Edit," I found I'd loaded not the original file on my desktop that I had chosen, but my edited "Diffuse" file. Furthermore, these Diffuse and Opacity files appear not to be independently editable--they behave like linked Smart Objects, and when one is edited, the other is updated with the changes.
Is this a bug? I can't find any mention of this behavior in the Photoshop User Manual. I'm using Windows 7, and I get the same behavior on 2 different computers with Photoshop. [URL].........
I had hoped to use the Load/Replace texture command as a quick way to load up independently editable versions of the same file to the different 3d material attributes (opacity, shine, etc.), but that doesn't seem possible. Or is there a better way to do this?
How can I place a Google imagery file in my model. Suppose I have a model in revit [2013] can I create something beneath the model and place Google imagery on it.
View 1 Replies View RelatedIs it possible to use a load statement in a profile to automatically load/unload a cuix?
View 7 Replies View RelatedI am able to use the menuload command to load the express menu, but when I try to execute one of the express tools. AutoCAD say invalid command, there was something on the website that said to type express tools at the command prompt, but when I do that, too it says invalid command.
View 5 Replies View RelatedAutoCad 2011. I am having no luck when trying to drag a command from the Command List pane to the Quick Access Toolbar. I have success draging to Tool Palettes
View 1 Replies View RelatedI am currently writing a series of routines for setting the layers for text, leaders and dimension commands. The end goal is a system where any annotation command sets the correct layer for the duration of the command, then reverts back to the layer that was active before the command.
I have managed to complete all the code, and it appears to be working fine, I just have one question: I have used -layer "m" "Lay_name" etc... for all layer setting commands, rather than any code to see if the layer exists already. In my limited testing this seems to be suitable, nothing that exists on that layer seems to be affected.
I know how to write code to determine if the layer exists already and set the layer instead, but so far it seems unnecessary??
After installing the VBA Module, I get the message "Unknown command "VBARUN"". I've rebooted, restarted and tried reinstalling the VBA Module to no avail.
View 4 Replies View RelatedI used send command for Export Layout..But the line only executes after exiting command method.
View 9 Replies View RelatedI press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
I need to save a drawing file and give it the name of my desire using a single command, I don't want to issue "saveas" and then specify the name in the file name prompt. This problem is has been faced when I was using ScriptPro and I couldn't succeeded to do that. Hence I need to know if it is feasible to do the stuff using a single command. It will be preferred if I can choose the location to save the file also rather than save the file to the default location.
View 2 Replies View Relatedwithout reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View RelatedI have a project that suddenly won't load. I have 25 versions of it, I save it under a new file name each time in case I need to go back to an older version.
Trouble is most of the versions won't load! Only the very early versions will load. Some of the later version start to load then disappear.
Hardware hasn't changed on the PC, maybe the video drivers have been updated, thats about it.
How can i use subtract area command in area command while using add command , often it happens we click on polyline whose area we did not want to consider. How can i do like this, i re click on that enclosed polyline and the area gets subtracted and the green fill goes away?
View 3 Replies View RelatedHow to automatically run dvb file when acad starts, I have been trying in autocad but its not working.I am using ACAD 2007
View 7 Replies View RelatedTo my knowledge this file has not been renamed and definitely not been deleted...Has been moved, but does that matter? The attached image is the error i get when trying to load .cuix as a partial in CUI dialogue box. I cannot load from CUILOAD, either.
I have verified that another cui of the same name is not already loaded.
I've got a firm of about 60 architects and we use a custom dll that loads on drawing open. the dll loads fine on all but one computer. even explicitly issuing the netload command and grabbing the dll manually does not work. it also does not work on other profiles on that computer (i tried an admin profile, even though the user is a local admin).
we're using .NET 4.0 on ACAD 2011
I have a project in my PC, and build it to file ".dll". It is working fine in my machine with "netload" command (to load it).
But in another PC "Netload" command can not load it . How i can load Dll file on other PC?
I have been trying to interface to AutoCAD from my VS 2010 project without luck.
My environment is 64bit windows 7 environment. I installed on my computer AutoCad 2012 and ObjectARX 2012.
I created a basic hello world project where I referenced the AcCui.dll AcDbMgd.dll AcMgd.dll but I keep getting errors when running it.
An unhandled exception of type 'System.IO.FileNotFoundException' occurred in Unknown Module.
Additional information: Could not load file or assembly 'Acmgd, Version=18.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
I have tried it with "Copy Local" false (also with true), I have tried to reference the dlls from the ObjectARX directories as well as the AutoCAD installation folders without luck.
I'm having trouble with my command not loading via a netload in AutoCAD 2012 SP1 64bit running on Windows 7 64bit. It works on most of my user's computers, but on a couple of the computers it doesn't seem to be doing anything. I'm using Visual Studio 2010 for coding and debugging, but I don't have debugging software on the computer that is causing the problem. I've attached my commands class in it's entirety to this post. The dll resides local on the user's computer and is not in a network location. When I run the netload on the development machine or one of my other working users, I get the message boxes and the program seems to run fine, but on the computers that aren't working I get nothing. No errors, no message boxes, nothing.
View 9 Replies View RelatedI was wondering if there was any way to control what gets loaded - almost like a "Safe Mode" with only basic functionality.
View 2 Replies View RelatedI have a .dll that uses registry entries to load itself when AutoCAD starts. But I have encountered a problem where it also loads even
When a customer chooses to load another AutoCAD plugin by another vendor. I would like it ideally only to be loaded when the user clicks on my desktop shortcut.
I am writing in VB.net & have noticed some vendors use a reference to object.arx in their shortcut. Is it possible to do this with a vb.net .dll or even a lisp?
I have been using the ribbon api to create my custom ribbon. I am now attempting to load said rribbon at startup by placing the load command into the initialize componant. It isn't working.
Dim ribCntrl As Autodesk.Windows.RibbonControl = Autodesk.Windows.ComponentManager.Ribbon
If ComponentManager.Ribbon Is Nothing Then
Return
End If
For i As Integer = 0 To ribCntrl.Tabs.Count - 1
[code]...
I seem to remember being told it's because the ribbon .dll hasn't yet started at this point sso it has nothing to use to load it?