AutoCAD Map 3D :: Z UCS Rotate In VP And Image Disappears
Mar 23, 2011
One of our other issue(s) is the z ucs rotate in a vp and the image disappears!
Im thinking its to do with a slight angle change in the x or y plane when doing a z ucs rotate making the image not on the viewing plane anymore. Using 2011 map3d but using in 2d workspace mode. All it would take is 0.000000001 degree to throw it out of wack i would imagine. When setting vp back to world and plan rotate it appears again?
Or, because its map3d and not just vanilla cad, is the whole world space set on a geoid by default(viewing plain) and when you rotate the vp ucs it throw's it out of alignment and puts it below the geoid and then looses it's visibility? This would apply to rasters imported with map/ import / ecw, tiffworld or 2jpg i assume?
View 5 Replies
ADVERTISEMENT
Jun 19, 2012
I've tried both draging an image into Autocad and importing it in as a block. When I try to rotates the image it either rotates around a point (but doesn't actually rotate itself) or rotates and disappears only leaving a white outline. How can I properly rotate an image?
View 3 Replies
View Related
Mar 18, 2011
I accessed an aerial image through data connect, adjust the the georeferencing, etc. Image comes in fine and no problems...
One day, I re-open the same file and the data-connected image is gone!
I try disconnecting and deleting the image, and then try re-connecting it but all I get is an error message "There was a problem adding data to Map."
View 5 Replies
View Related
Oct 8, 2013
i inserted an areas image with geomap but as i zoom cloce the image disapears and i get a tile with a white image of a camera. can i disable it? it is very annoying.i dont care if i loose ressolution if i get closer .why autodesk did that?
View 3 Replies
View Related
Oct 19, 2013
I have had CS6 for about a month. The past few days when I click to use crop, magic wand etc my photo disappears from the screen. The screen is black.
View 12 Replies
View Related
Nov 29, 2013
When using the crop tool, and I expand the cropped area outside the original image, the image disappears and the area turns white. How do I turn what ever "feature" this is off?
View 2 Replies
View Related
Jul 2, 2013
I have an assignment for school where I am suppose to trace an eagle onto another layer. However the image disappears while I am trying to trace it. Is this some sort of setting that I need to change?
View 6 Replies
View Related
May 15, 2012
I pasted a OneNote scanned image into a drawing file. I need to rotate the image slightly. I created a new UCS and rotated avout the Z axis. When I did this the image disappeared. When I restore the World UCS the image returns. Is there a way to rotate a scanned image?
View 5 Replies
View Related
Oct 14, 2013
Today I went to puppet warp a layer, and as soon as I placed the first pin, the image part of the puppet warp disappeared - only the mesh was visible. I can't figure out where to put pins or adjust my layer if I can't see the actual image!
Have been using puppet warp with my current system config for a long time with no issues, and had, in fact, puppet warped several things just a few minutes prior with no issues. I have tried after restarting, using hardly any system resources, and with all other layers visible, and hidden. No matter what I try, as soon as I place the first pin, only the mesh remains and I can't see what I'm trying to warp at all. !
View 10 Replies
View Related
Jan 14, 2013
In Photoshop CS6, all of a sudden my image disappears when I try to transform a selection.
View 5 Replies
View Related
Dec 11, 2012
photoshop CS5
new 17" toshiba laptop (this was not a problem on my previous/old laptop)
2 gig Video Card: nVidia Gforce GT 630M/PCIe/SSE2
12 gigs of ram
First ?:
How do I get drawings I've just opened to float (rather than pin themselves to the top left of ph-shop?
Second ?:
When I open a photo.... work on it.... open a second photo....It opens and appears as a blank pallet, (as if there's no picture) but.... when I grab and move the image window with my cursor at the top border, the image appears... then when I release it placing it where I want to move it... the image disappears again. The image is visable the WHOLE time within the navigator panel.
I then have to restart CS5 in order to fix it... but then it'll happen 10 minutes later.
View 5 Replies
View Related
Aug 29, 2011
I'm modeling something and when I go to wireframe the background image disappears.
"Two hours of loose philosophizing will never tilt the scales against a sound belch."
View 1 Replies
View Related
May 24, 2011
getting a weird problem. at first when I had 2 image planes (front and side) every time I saved my scene and restarted, they would both disappear from perspective view. but they were still showing in ortho view. I'd have to delete the image plane and make it again. after adding a back camera with its own image, saving and restarting: it started to have all of them show in perspective, but now front and side dont show in ortho.
edit:: the first issue happens in 2011. the second in 2012. back cam probably has nothing to do with it.
View 1 Replies
View Related
Mar 3, 2013
I have just downloaded Gimp on my iMac and when I drag an image onto the Gimp screen Gimp just disappears.
View 1 Replies
View Related
Dec 2, 2012
I opened an image, scaled it, changed the canvas size and pasted another image into it. When I move new image below the original image (where the gray checker board is located) the new image disappears.
I finally closed everything and started over. Same results.
Now what?
View 3 Replies
View Related
Sep 9, 2012
I have an image opened in PS CS6 I can see the image I select the Crop Tool The image dissapears completaly from the screen I select any other tool The image reappears again.
View 4 Replies
View Related
Apr 20, 2011
every time I export my cdr file to a jpg, all but a small portion of the picture disappear. I've tried saving it in other formats and a few other things, but none have been successful. I've included print screens of what the picture should look like, what it does look like, and the export setting I've been using.
View 5 Replies
View Related
Jun 25, 2013
I'm a Gimp newbie, using 2.8.4. I have a png image that's 530 pixels wide. I'm trying to merge it with a white background layer that is 960 pixels wide. I need to align the image to the right side of the background layer. This is what I did:
- opened my image
- created background layer (960 px wide)
- made background layer the bottom layer
- clicked on Alignment tool
- clicked the hand cursor on the image (530 px wide)
- made the background layer the active layer
- set "Relative to:" Active layer
- clicked on the right alignment arrow
The image did move to where I wanted it, but most of the image from the right edge disappeared, so all I've got is a small portion of the left side of the image in the middle of my background layer. Then I did the following:
- merged visible layers with Expand as necessary
That action merged the layers, but all I have is a small part of my image near the center of the background.
Attached File(s) Screenshot from 2013-06-25 19:41:24.png (59.32K)
View 9 Replies
View Related
Feb 12, 2014
I am having a problem that may be a simple solve (but not for me). My image disappears after applying a rectangle to it. I have tried "bring to front" and don't know what else to try.
View 1 Replies
View Related
Feb 21, 2013
After intalling my new mouse (Logitech Corded Mouse M500) scrolling/resizing makes the image disappear in a short time 2-3 minutes. I read about it in older versions, only happens with this mouse.
How can I fix it? I've just brought the mouse, seems very good, the older one is unuseable (lacks accurancy due the cheap IR sensor).
View 4 Replies
View Related
Sep 26, 2010
When I crop a cdr image, part of the image disappears within the crop window. Clicking inside the cropped image reveals node locations as if the image is still there but the black lines are invisible. But, there are some objects visible in the cropped image.
View 3 Replies
View Related
Jun 1, 2013
I am using LR 4.4 on an iMac. Why the White Balance Selector tool would disappear when moved across an image?
it seems to change to a vertical line with an arror top and bottom.
The areas of the image on which it disappears seem to be consistent, in other words, it disappears on the same portion of the image eveytime.
UPDATE: Since posting the above a few minutes ago I've noticed that my cursor is behaving eractically. For example, on a different image to the one used above, in the library module using the Loupe the cursor changes from a magnifying glass to an arrow pointing to the right. It does this on the same part of the image every time.
View 2 Replies
View Related
Jul 21, 2012
After cropping a photo in cs4 i have tried hitting the return key as well as edit/crop and then my photo disappears and the image box reduces in size to about 1 inch square with no image. I have expanded the image box but nil photo. This has never happened before.
I reloaded cs4 onto my computer but the problem still exists. I have also tried out opening the file from Bridge as well as Photoshop with the same result.
View 7 Replies
View Related
Dec 10, 2012
10.8.2 OSX CS6 do you know the solution to this? Am trying to rotate my image.
View 4 Replies
View Related
Apr 24, 2004
How do you rotate a photo, say 15 degrees, and keep the edges of the photo straight?
View 7 Replies
View Related
Aug 9, 2006
I dont know if this can be done in ps or not but im trying to rotate an image not
like a circle or a clock but im trying to rotate the same way the earth spins in a horizontal axis.
View 5 Replies
View Related
Feb 24, 2005
I'm using the warp>flag filter and I want to be able to rotate the image once the warp is applied and it is distorting it because of the filter and it won't keep it's form.
View 1 Replies
View Related
Apr 16, 2013
I have an image in which I want to rotate one component some arbitrary number of degrees along a horizontal axis without changing any other part of the image. For example, if I have an image with a tobacco pipe in someone's mouth, the pipe stem is a horizontal axis.
The pipe bowl is normally vertical at the end of the stem. I want to rotate the pipe along the stem some number of degrees so that the bowl would be at 45 degrees rather than 90 degrees relative to vertical, or so that the viewer might be looking into the bowl of the pipe. Can that be done in CS6? If so, how?
View 5 Replies
View Related
Oct 8, 2013
i can nudge with the arrow keys when moving an image but can't nudge rotate an image, the arrow keys will only move the image up and down or left to right.
View 2 Replies
View Related
Aug 8, 2011
Is there any way to just rotate a rectangular image? I have often scanned in something that's not square, it's often a brochure that's taller than it is wide. But when I scanned it, I had turn it sideways to get the whole thing visible to the scanner. So it scans completely, but now I have an image of it that's not "up is up"-- I have "up is right" or "up is left." But now I have to do all this junkbutter: 1) Look at the canvas size, 2) make the width & height equal to the larger of the two, 3) use the Rotate tool to turn the image 90 degrees, then 4) do some magic to move the image to start at the upper-left, and 5) crop it back down to get rid of the blank space on the bottom. YUCKY! Is there some magic tool I haven't found yet that will rotate, move and crop all in one step? I just want to turn the entire image on it's side without any other fuss. Is that possible somehow? I have to assume it is, but I sure couldn't find it...
View 3 Replies
View Related
May 25, 2011
I can find image rotate easily enough. But I can't find any way I can rotate it a few degrees. I frequently scan stuff in and it frequently needs 1 degree or such to straighten it up. I used to do that with Paint Shop Pro. Surely Gimp has the same functionality?
View 3 Replies
View Related
