I can find image rotate easily enough. But I can't find any way I can rotate it a few degrees. I frequently scan stuff in and it frequently needs 1 degree or such to straighten it up. I used to do that with Paint Shop Pro. Surely Gimp has the same functionality?
View 3 RepliesI'm trying to rotate a imaged of a signature by 20 degrees. After I rotate the image I can't view the whole signature. I have tried to resize the canvas, add transparency.
View 3 Replies View RelatedI like the custom print package in LR, but cannot find a rotate option other than 90 degrees. Am I overlooking, the option doesn't excist or I'm using it not the right way? I searched this forum and the Internet with no results.
For example in picture below I would like to rotate the 4 smaller photo's 45 degrees
Some of my landscape horizon shots need only a slight rotation left or right; less than a couple of degrees. How can I do this, and can it be done in Develop?
View 5 Replies View RelatedIs there a way to take an image, and make an animation of it rotating 360 degrees?
I've never looked into batch processing with GIMP, but I would be willing to. This is for a video game sprite.
In my work i rotate objects mostly 90 degrees CW or CCW and I always wanted to make a hotkey for it.. There's a command in 3dsmax called "RotateCW" for it, but it doesn't work when more than one object is selected.. also i tried doing it with script :
macroScript Rotate90Z
category:"DragAndDrop"
toolTip:""
(
(
rotate $ (angleaxis 90 [0,0,1])
)
)
but this rotates objects only about their pivots even if option "use selection's center" is chosen and even if objects are grouped - it rotates objects in the group independently but not the group as a whole. It's completely inappropriate.
Normally i select objects (or a group), then go in "select and rotate" mode, type in 90 degrees and it works well. So i'd like to imitate this behavior by a script or some other way to set a hotkey for this set of actions..
How to rotate a clip through 90deg?
View 5 Replies View RelatedVS ProX4 allows us to rotate a clip by 45 degrees. I need to just sightly rotate it (1 degree or less). It can be done very easily with other editong softwares; I guess it can also be done with ProX4.
View 4 Replies View RelatedI am trying to rotate 30 degrees along an axis.
In Rhino, it is simply using Rotate3D -> pick your axis of rotation -> type degrees -> enter
In Max, how do I pick an axis rather than world XYZ?
I'll upload pictures for details
Needed to rotate my plan 180 degrees. So I typed in UCS enter then z enter then 180 enter and then plan enter. My plan rotated and it looked fine. I noticed my crosshairs where now green and red. I needed to add more things to my drawings but the lines I was drawing do not look straight - they look bent and the ucs icon doesnt look square. I attached my drawing for you to see what I am talking about
View 1 Replies View RelatedI have a lot of GoPro footage that I will be catalouging in LR5 and at least half of the footage is upsidedown.
Is there a way to rotate the video 180 degrees so that I can view it properly?
Is it possible to rotate a viewport to an angle other than 90 degrees. I am trying to rotate a viewport 11 degrees counter clockwise. I cannot rotate the model.
View 1 Replies View RelatedIs there a way to get some straight edges if an image rotated a few degrees?
View 13 Replies View RelatedIs it possible that CorelDraw has no icon, r-click trick, keyboard shortcut, nor any other type of shortcut to rotate (an) object(s) 90 degrees?
View 12 Replies View RelatedAfter I have rotated an entire floor plan drawing 180 degrees, the texts and room names have also been rotated upside down.What is the solution to the problem so that the texts/room names will not be upside down after I rotated the drawing 180 degrees?
View 7 Replies View RelatedHow do you rotate a video clip by 90 degrees?
View 1 Replies View RelatedI have an object with a drop shadow. I want to rotate the object and the drop shadow 90 degrees. But when I rotate the object, the drop shadow does not rotate along with the object.
How to lock the drop shadow so that it will rotate with the object. p.s. I already know how to change the angle of the drop shadow.
Attached is a dynamic block for a civil grid tick. It's my first time creating a dynamic block so it's probably not the most efficent use of the dynamic parameters etc.
I have it setup with 4 visibility states to allow the northing and easting attributes to "rotate" about the center of the grid tick, to give options for readablity and/or text overlap.
What I wanted to add was figure out how to make the individual attributes flip 180 degrees about a point (roughly the center of the attribute). Again this would be for readability.
i have a simple fence line type with "x"s....if i draw the line straight up or to the right it looks perfect. but if i draw it anywhere to the left then the Xs are off centered.
View 9 Replies View RelatedI have Autodesk inventor standard NOT the pro version. I am a Revit professional in dire need of learning Inventor. My exact steps are as follows:
1. Open assembly
2. create component - (simple wheel(cylinder) with an off axis hole in the middle so I can see if it is rotating.)
3. create component- flat surface.
4. constrain the cylinder to the flat surface via a tangent constraint
5. constrain the cylinder to the front edge of the flat surface via a mate constraint.
6. go to motion tab in constraint's, click rotation-translation, type in 10in for distance.
7.wheel does not rotate on surface like a wheel should. There is no affect of the surface on the wheel rotation.
In other words I want to get the circumference of the wheel to rotate 360 degrees as it travels pi*diameter of flat surface.
We use a lot of #4 finish Stainless steel sheet.
I have automated the changing of the active renderstyle to "Polished Brushed" to approximate this, but usually orientation is important. For instance, the texture will be around tube, and on large sheets, we want to keep all the sections orientated one specific direction.
I'd like to be able to easily rotate the texture thru 90 degrees (and possibly, a user selectable angle).
I'd prefer not to have to manually select a face first, either.
I've created a drawing in model space, added text in paper space. When I go to plot the drawing the text is rotated 90 degrees instead of staying oriented the way I added it. There must be some setting that I am missing somewhere!
View 9 Replies View RelatedI am trying to get a disc (Coin) to continuously rotate 360 degrees on its vertical axis.
View 5 Replies View RelatedIs there any way to just rotate a rectangular image? I have often scanned in something that's not square, it's often a brochure that's taller than it is wide. But when I scanned it, I had turn it sideways to get the whole thing visible to the scanner. So it scans completely, but now I have an image of it that's not "up is up"-- I have "up is right" or "up is left." But now I have to do all this junkbutter: 1) Look at the canvas size, 2) make the width & height equal to the larger of the two, 3) use the Rotate tool to turn the image 90 degrees, then 4) do some magic to move the image to start at the upper-left, and 5) crop it back down to get rid of the blank space on the bottom. YUCKY! Is there some magic tool I haven't found yet that will rotate, move and crop all in one step? I just want to turn the entire image on it's side without any other fuss. Is that possible somehow? I have to assume it is, but I sure couldn't find it...
View 3 Replies View RelatedI am looking for a way to rotate a image, but not the normal clockwise rotation, rather a spin rotation. I have tried the the transform tool with slight success . imagine looking at a front view of a wheel & tire that needs turned slightly.
View 14 Replies View RelatedIs there a way in gimp to rotate a 2D image (e.g. BMW%20M3%20-%202002%20-%2003.jpg) about the Y Axis? I tried GMIC but that rotates the layer in 3D. I would like to create a view of the front of the car or any any in between.
View 6 Replies View RelatedWhen Rotating or Resizing an image I have recently run into an issue. This is new behavior so I think I either have something set incorrectly, or it came in with a recent re-install.
When Rotating or Resizing, and setting Clipping to Adjust, it always Crops the image.
In other words: If I were to attempt to stretch an image bigger than 1000x1000 to say 1500x1500 it appears to do all the correct calculations, and does stretch the image, but anything outside the original 1000x1000 disappears.
Likewise if I were to attempt to rotate an image that were say, 1000x1500, 90°, I would end up with a rotated image 1000x1000 in size, and transparent/background for the balance of the original 1000x1500 sized image.
I've tried uninstalling/reinstalling (it remembered all my settings, so I don't know how much good this might have done), setting the Clipping option to Clip, then Crop and back to Adjust again (also with no result).
I've noticed that in Paint Tool SAI (which I really wish I could buy but I have no money) has two things I wish GIMP could do.
1: SAI has an ability to rotate the view without rotating the image itself.(rotating a graphics tablet to comfortably get the pen stroke right.) Is there any way this could be implemented into a new update of GIMP?
2: SAI has really good pressure sensitivity and natural *smooth* pressure strokes. I've kinda noticed GIMP is geared more towards Mouse/Touch pad art creation; is there any way to get pressure sensitivity into the program?
I'm afraid to use GIMP anymore because the whole program takes about 20 minutes to load, from clicking the application icon on my desktop. Once it's up though, it functions well. Even after I close it out, and end up clicking the application icon again, it takes another 20 minutes to load up.
I have a psd mockup located here. [URL]... - the last one.
inserting image in a proper way to getting the correct final result. I tried already but no succes. How to center the inserted image to the box. How to make image rotate and that fits to iphone screen?
I just started to use Gimp a few days ago. I am trying to duplicate an image side by side, then rotate the one image....just for learning purposes. However the new box (that should have my duplicate image) Is just a blank outline of the rectangle box. I watched a video over and over trying to get this, and I just do not see any steps I am missing, yet on the video it turns out perfect. I am normally pretty good with computers, but evidently not with Gimp.
Here is the Path:
file> open>select and open photo>rectangle tool>outline photo>copy>paste>open new layer>select new pasted layer.
Instead of the photo duplicating itself I get a "blank outlined box".
How do I get the export parcel ananlysis to show degrees minutes and seconds instead of the default decimal degreees. My direction settings are set to DMS, but I can't see where to change arc deltas...
(running C3D 2012 sp4, Win7 64bit, 8GB)