3ds Max :: Rotate Objects At 90 Degrees
Jun 10, 2013
In my work i rotate objects mostly 90 degrees CW or CCW and I always wanted to make a hotkey for it.. There's a command in 3dsmax called "RotateCW" for it, but it doesn't work when more than one object is selected.. also i tried doing it with script :
macroScript Rotate90Z
category:"DragAndDrop"
toolTip:""
(
(
rotate $ (angleaxis 90 [0,0,1])
)
)
but this rotates objects only about their pivots even if option "use selection's center" is chosen and even if objects are grouped - it rotates objects in the group independently but not the group as a whole. It's completely inappropriate.
Normally i select objects (or a group), then go in "select and rotate" mode, type in 90 degrees and it works well. So i'd like to imitate this behavior by a script or some other way to set a hotkey for this set of actions..
View 1 Replies
ADVERTISEMENT
Jan 5, 2013
How to rotate a clip through 90deg?
View 5 Replies
View Related
Aug 6, 2011
VS ProX4 allows us to rotate a clip by 45 degrees. I need to just sightly rotate it (1 degree or less). It can be done very easily with other editong softwares; I guess it can also be done with ProX4.
View 4 Replies
View Related
Feb 24, 2012
I am trying to rotate 30 degrees along an axis.
In Rhino, it is simply using Rotate3D -> pick your axis of rotation -> type degrees -> enter
In Max, how do I pick an axis rather than world XYZ?
I'll upload pictures for details
View 2 Replies
View Related
Sep 15, 2012
Needed to rotate my plan 180 degrees. So I typed in UCS enter then z enter then 180 enter and then plan enter. My plan rotated and it looked fine. I noticed my crosshairs where now green and red. I needed to add more things to my drawings but the lines I was drawing do not look straight - they look bent and the ucs icon doesnt look square. I attached my drawing for you to see what I am talking about
View 1 Replies
View Related
May 25, 2011
I can find image rotate easily enough. But I can't find any way I can rotate it a few degrees. I frequently scan stuff in and it frequently needs 1 degree or such to straighten it up. I used to do that with Paint Shop Pro. Surely Gimp has the same functionality?
View 3 Replies
View Related
Jan 2, 2012
I like the custom print package in LR, but cannot find a rotate option other than 90 degrees. Am I overlooking, the option doesn't excist or I'm using it not the right way? I searched this forum and the Internet with no results.
For example in picture below I would like to rotate the 4 smaller photo's 45 degrees
View 3 Replies
View Related
Dec 21, 2012
Some of my landscape horizon shots need only a slight rotation left or right; less than a couple of degrees. How can I do this, and can it be done in Develop?
View 5 Replies
View Related
Sep 19, 2013
I have a lot of GoPro footage that I will be catalouging in LR5 and at least half of the footage is upsidedown.
Is there a way to rotate the video 180 degrees so that I can view it properly?
View 1 Replies
View Related
Sep 7, 2011
Is it possible to rotate a viewport to an angle other than 90 degrees. I am trying to rotate a viewport 11 degrees counter clockwise. I cannot rotate the model.
View 1 Replies
View Related
Apr 22, 2013
I'm trying to rotate a imaged of a signature by 20 degrees. After I rotate the image I can't view the whole signature. I have tried to resize the canvas, add transparency.
View 3 Replies
View Related
Dec 10, 2012
Is there a way to get some straight edges if an image rotated a few degrees?
View 13 Replies
View Related
May 6, 2012
Is it possible that CorelDraw has no icon, r-click trick, keyboard shortcut, nor any other type of shortcut to rotate (an) object(s) 90 degrees?
View 12 Replies
View Related
Aug 16, 2012
After I have rotated an entire floor plan drawing 180 degrees, the texts and room names have also been rotated upside down.What is the solution to the problem so that the texts/room names will not be upside down after I rotated the drawing 180 degrees?
View 7 Replies
View Related
Jan 19, 2013
How do you rotate a video clip by 90 degrees?
View 1 Replies
View Related
Nov 23, 2012
I have an object with a drop shadow. I want to rotate the object and the drop shadow 90 degrees. But when I rotate the object, the drop shadow does not rotate along with the object.
How to lock the drop shadow so that it will rotate with the object. p.s. I already know how to change the angle of the drop shadow.
View 29 Replies
View Related
Jul 11, 2011
Attached is a dynamic block for a civil grid tick. It's my first time creating a dynamic block so it's probably not the most efficent use of the dynamic parameters etc.
I have it setup with 4 visibility states to allow the northing and easting attributes to "rotate" about the center of the grid tick, to give options for readablity and/or text overlap.
What I wanted to add was figure out how to make the individual attributes flip 180 degrees about a point (roughly the center of the attribute). Again this would be for readability.
View 1 Replies
View Related
Nov 1, 2012
i have a simple fence line type with "x"s....if i draw the line straight up or to the right it looks perfect. but if i draw it anywhere to the left then the Xs are off centered.
View 9 Replies
View Related
Dec 23, 2013
I have Autodesk inventor standard NOT the pro version. I am a Revit professional in dire need of learning Inventor. My exact steps are as follows:
1. Open assembly
2. create component - (simple wheel(cylinder) with an off axis hole in the middle so I can see if it is rotating.)
3. create component- flat surface.
4. constrain the cylinder to the flat surface via a tangent constraint
5. constrain the cylinder to the front edge of the flat surface via a mate constraint.
6. go to motion tab in constraint's, click rotation-translation, type in 10in for distance.
7.wheel does not rotate on surface like a wheel should. There is no affect of the surface on the wheel rotation.
In other words I want to get the circumference of the wheel to rotate 360 degrees as it travels pi*diameter of flat surface.
View 6 Replies
View Related
Aug 7, 2013
We use a lot of #4 finish Stainless steel sheet.
I have automated the changing of the active renderstyle to "Polished Brushed" to approximate this, but usually orientation is important. For instance, the texture will be around tube, and on large sheets, we want to keep all the sections orientated one specific direction.
I'd like to be able to easily rotate the texture thru 90 degrees (and possibly, a user selectable angle).
I'd prefer not to have to manually select a face first, either.
View 2 Replies
View Related
May 18, 2012
I've created a drawing in model space, added text in paper space. When I go to plot the drawing the text is rotated 90 degrees instead of staying oriented the way I added it. There must be some setting that I am missing somewhere!
View 9 Replies
View Related
Jun 18, 2013
I am trying to get a disc (Coin) to continuously rotate 360 degrees on its vertical axis.
View 5 Replies
View Related
May 18, 2012
How do I get the export parcel ananlysis to show degrees minutes and seconds instead of the default decimal degreees. My direction settings are set to DMS, but I can't see where to change arc deltas...
(running C3D 2012 sp4, Win7 64bit, 8GB)
View 1 Replies
View Related
May 22, 2009
I can't rotate anything in 3ds Max anymore. The only way I've found is to go via the hierarchy pivot box (left hand menu), which isn't much of a workaround.
The rotate gizmo appears, the pie slice appears, angle numbers change when I drag but nothing moves. Is there a quick way of resetting 3ds to defaults? I presume I've switched something on or off that I shouldn't have!
I can rotate merged objects, just not native ones. I grouped a lorry with a box (I wanted to put a logo on the box for the side of the lorry) - when I rotated the lorry, the box stayed put!
View 3 Replies
View Related
Dec 23, 2011
I'm trying to rotate a group of objects along an axis that is not x y or z. The objects are imported from Rhino. I also import a line representing that rotation axis. How do I set that line to be my axis?
View 1 Replies
View Related
Nov 16, 2012
CS6 - Is it possible to rotate multiple objects independent of one another? In other words selecting say 9 object in a grid then rotating the all 30 degrees on their own axis.
View 5 Replies
View Related
Dec 14, 2012
Since X6 I can't rotate any Barcode anymore. When I open X5 Files in X6 the barcodes are unreadable...
We need a patch Corel.
View 2 Replies
View Related
Oct 12, 2012
I use Acad and Turbocad selectively. I can't find a way to enable Acad to have object handlers to move and rotate objects. Is there a setting that I can enable to turn this feature on in Acad? I like this feature in Turbocad, but like to have in Acad.
View 7 Replies
View Related
Apr 16, 2013
I need some of my objects to always rotate around the same point. How can I select a point which will stay that way? Using the rotate tool resets after deselecting.
Also, I'd like to rotate objects around a certain point even when using the right click > Transform > Rotate.
View 5 Replies
View Related
Feb 18, 2014
I have been working on a project in illustrator and all of a sudden, I couldnt use the selection tool to rotate and manipulate objects anymore. The arrows don't even show up to make that sort of action. Is there some way that I accidentally turned off the tool? If so, how do I turn it back on so I can work with it the way it was before?
View 4 Replies
View Related
Dec 19, 2013
Lisp routine or macro that will either rotate or align selected objects so they are parallel to an axis on the current UCS?
Specifically, when placing mtext to label an object. I typically align my ucs to the object then create the text so it is parallel to the object. It would be great if I could create the text with a rotation of 0, align my ucs to the object to be labeled and then with a single click, select the text making it parallel to the X axis.
View 5 Replies
View Related