I am having a problem that may be a simple solve (but not for me). My image disappears after applying a rectangle to it. I have tried "bring to front" and don't know what else to try.
View 1 Replies
When applying certain SVG filters to a group that contains an object with an opacity mask, that masked object disappears. AI_Dilate_3, for example.
View 1 Replies View RelatedAll im tryin to do is create a rectangle with a gradient on it starting with blue and finishing with light blue. I create the canvas, then new layer, then rounded rectangle then when i try and put a gradient on it it wont let me telling "the content of the layer is not directly editable? i must be missing something dead simple?
View 1 Replies View RelatedI have an assignment for school where I am suppose to trace an eagle onto another layer. However the image disappears while I am trying to trace it. Is this some sort of setting that I need to change?
View 6 Replies View RelatedI'm trying to apply a stroke to a .jpg image in Illustrator 6, and even though the weight and color show in the windows, the object itself has no visible stroke.
View 3 Replies View Relatedi'm basically making a shape with the pen tool, then i click the paint bucket, then the shape disappears. i've also done this with the rectangle tool and the exact same thing happens.
usually, it will work when i frst open the document, but after i start making new layers/text then i try to do this, the shape i make disappears.
how i can keep the shape so i can select the paint bucket tool?
Yes, I'm new to Illustrator. Every time I open up a previously made image, usually a jpg of an illustration I did by hand, there is an outline of a rectangle right in the middle of my image. I have no doubt I put it there while doing something else. But, now it shows up in all the images I open in Illustrator. What I might have done to create this, and better yet, how I can get rid of it? I'm using Illustrator CS4.
View 10 Replies View RelatedI watched Adobe TV Illustrator's tutorial about cropping images with a clipping mask. In the video, the presenter uses the rectangle tool with the clipping mask, and makes a reference that the circle or vector shape could be used, but I cannot figure out how to get the circle.
[URL] ...
I'm new to Illustrator and need step by step instructions!
Any quick tips to convert an expanded appearance rounded rectacngle back to a sharp cornered rectangle?
View 6 Replies View RelatedI'm having a problem with my Adobe Illustrator CS6, whenever I click an image to select, i need to wait for loading until it's selected. Quite annoying everytime I need to select few elements on my artboard.
View 7 Replies View RelatedI am experiencing image distortion with vector shapes or outlined letters with scale down. Shift + Alt + Click locks in the proportions of the image as a whole but what happens is individual letters/shapes become distorted resulting in a completely different look.
View 1 Replies View RelatedI have had CS6 for about a month. The past few days when I click to use crop, magic wand etc my photo disappears from the screen. The screen is black.
View 12 Replies View RelatedI have been using feather on image photo to create the all corner faded edges however after I upgraded to ver CS6, I encounter this problem when I applying the same method using feather (radius: 15-20) on the image photo and did an inverse, a warning message popped out
"Warning: no pixels are more than 50% selected the selection edges will not be visible". Hence, cannot apply any feather on the image, My image is a full solid color layer.
When using the crop tool, and I expand the cropped area outside the original image, the image disappears and the area turns white. How do I turn what ever "feature" this is off?
View 2 Replies View RelatedI've tried both draging an image into Autocad and importing it in as a block. When I try to rotates the image it either rotates around a point (but doesn't actually rotate itself) or rotates and disappears only leaving a white outline. How can I properly rotate an image?
View 3 Replies View RelatedOne of our other issue(s) is the z ucs rotate in a vp and the image disappears!
Im thinking its to do with a slight angle change in the x or y plane when doing a z ucs rotate making the image not on the viewing plane anymore. Using 2011 map3d but using in 2d workspace mode. All it would take is 0.000000001 degree to throw it out of wack i would imagine. When setting vp back to world and plan rotate it appears again?
Or, because its map3d and not just vanilla cad, is the whole world space set on a geoid by default(viewing plain) and when you rotate the vp ucs it throw's it out of alignment and puts it below the geoid and then looses it's visibility? This would apply to rasters imported with map/ import / ecw, tiffworld or 2jpg i assume?
Image not updating after applying filter in CS6. Preview is generated but filter won't apply. Very sporadic so I'm assuming it might be a memory problem. Using on Win7, AMD Phenom II, with 8 GB of memory.
View 7 Replies View RelatedI am applying Artistic filters to an image in Photoshop. Some of the filters are turning the image into a black and white image, for example, the "torn edges filter." And it then does not seem possible to change that layer into a colored layer. Other filters, such as "glass" leave the image its original color. Is it possible to use the torn edges filter without turning the image black and white?
View 1 Replies View RelatedIf I draw a shape and select the fill color from one of my swatches, this applies the color OK. Then if I want to change the fill color to a tint of the swatch, what I used to do in Illustrator 5.5 was go to the 'Color Guide' tab and choose a tint. This tint was then applied to the shape. If I do the same in Illustrator CC, I can select the tint, but it does not get applied to the shape, the shape remains with its original fill color. I use tints of our company colors a lot, so I need this to work!
View 6 Replies View RelatedToday I went to puppet warp a layer, and as soon as I placed the first pin, the image part of the puppet warp disappeared - only the mesh was visible. I can't figure out where to put pins or adjust my layer if I can't see the actual image!
Have been using puppet warp with my current system config for a long time with no issues, and had, in fact, puppet warped several things just a few minutes prior with no issues. I have tried after restarting, using hardly any system resources, and with all other layers visible, and hidden. No matter what I try, as soon as I place the first pin, only the mesh remains and I can't see what I'm trying to warp at all. !
In Photoshop CS6, all of a sudden my image disappears when I try to transform a selection.
View 5 Replies View Relatedphotoshop CS5
new 17" toshiba laptop (this was not a problem on my previous/old laptop)
2 gig Video Card: nVidia Gforce GT 630M/PCIe/SSE2
12 gigs of ram
First ?:
How do I get drawings I've just opened to float (rather than pin themselves to the top left of ph-shop?
Second ?:
When I open a photo.... work on it.... open a second photo....It opens and appears as a blank pallet, (as if there's no picture) but.... when I grab and move the image window with my cursor at the top border, the image appears... then when I release it placing it where I want to move it... the image disappears again. The image is visable the WHOLE time within the navigator panel.
I then have to restart CS5 in order to fix it... but then it'll happen 10 minutes later.
I accessed an aerial image through data connect, adjust the the georeferencing, etc. Image comes in fine and no problems...
One day, I re-open the same file and the data-connected image is gone!
I try disconnecting and deleting the image, and then try re-connecting it but all I get is an error message "There was a problem adding data to Map."
I'm modeling something and when I go to wireframe the background image disappears.
"Two hours of loose philosophizing will never tilt the scales against a sound belch."
getting a weird problem. at first when I had 2 image planes (front and side) every time I saved my scene and restarted, they would both disappear from perspective view. but they were still showing in ortho view. I'd have to delete the image plane and make it again. after adding a back camera with its own image, saving and restarting: it started to have all of them show in perspective, but now front and side dont show in ortho.
edit:: the first issue happens in 2011. the second in 2012. back cam probably has nothing to do with it.
I have just downloaded Gimp on my iMac and when I drag an image onto the Gimp screen Gimp just disappears.
View 1 Replies View RelatedI opened an image, scaled it, changed the canvas size and pasted another image into it. When I move new image below the original image (where the gray checker board is located) the new image disappears.
I finally closed everything and started over. Same results.
Now what?
I open a .dng file which was in greyscale. Then converted it to RGB. Applied the effect Graphic Pen. Added a new layer, fill it with red, changed mode to Overylay, and when I tried merging down, or saving as a jpeg, it converts the image right back to B&W. I even tried changing my brush to red and Overlay mode, it just won't let me color the image at all. I've tried hue/saturation, and when I try to save the adjustment, it converts right back to B&W. Here are some screen shots.
View 4 Replies View RelatedI can crop and feather a selection of an image, but what i wanted to do was apply a feathered edge to an entire image so that i could drop it into a word doc and it would look a bit smarter.
I've been trying to do it by -
'Select > All ' then ' Select > feather ' applying the amount of feather (i did an inch just to make sure).
But it made no difference - i tried exporting this as a JPEG to see if it came up then but it still didn't make a difference...
I need to apply individual unique keywords to a large (1000+) set of images. Is there a faster way to advance to the next image after applying a keyword than using the mouse to select the next image from the library browser? A feature similar to the Shift>[rating number] trick to advance to the next image while assigning ratings?
My lack of knowing this trick is killing my productivity by at least a factor of two.
I was desiging images for my children and I was having difficulty with the colors- I would select a color from the color picker and a different shade/color would be applied to the text. Hoping it was a RAM issue, I just restarted my computer and it resolved itself. Easy enough. I completed the designs and went about my day.
Today, I'm working on a project for someone else and it's doing it again. I've restarted the computer and I've reset settings on Illustrator to the default but neither of these things resolved the problem.
In an attempt to make sure I wasn't going crazy, I took a screen shot of the text I'm attempting to color and the color picker box showing the color I was trying to choose. The selected color was R 6 G 6 B 249. I opened the image in paint and with the eyedropper tool selected the color that was actually applied and that color is R 61 G 93 B 171- so clearly not the same color at all. I then opened it in Photoshop to determine if it was an Adobe problem or just an Illustrator problem. With the eyedropper tool, I got the same results that I did in paint. Illustrator is definitely not applying the colors correctly.
