Photoshop :: Image Disappears In CS6
Oct 19, 2013I have had CS6 for about a month. The past few days when I click to use crop, magic wand etc my photo disappears from the screen. The screen is black.
View 12 Replies
ADVERTISEMENT
Photoshop :: Image Disappears When Cropping
Nov 29, 2013When using the crop tool, and I expand the cropped area outside the original image, the image disappears and the area turns white. How do I turn what ever "feature" this is off?
View 2 Replies View RelatedPhotoshop :: Image For Puppet Warping Disappears
Oct 14, 2013Today I went to puppet warp a layer, and as soon as I placed the first pin, the image part of the puppet warp disappeared - only the mesh was visible. I can't figure out where to put pins or adjust my layer if I can't see the actual image!
Have been using puppet warp with my current system config for a long time with no issues, and had, in fact, puppet warped several things just a few minutes prior with no issues. I have tried after restarting, using hardly any system resources, and with all other layers visible, and hidden. No matter what I try, as soon as I place the first pin, only the mesh remains and I can't see what I'm trying to warp at all. !
Photoshop :: CS6 / Image Disappears When Using Transform Function?
Jan 14, 2013In Photoshop CS6, all of a sudden my image disappears when I try to transform a selection.
View 5 Replies View RelatedPhotoshop :: Image Disappears After Opening Up Multiple?
Dec 11, 2012photoshop CS5
new 17" toshiba laptop (this was not a problem on my previous/old laptop)
2 gig Video Card: nVidia Gforce GT 630M/PCIe/SSE2
12 gigs of ram
First ?:
How do I get drawings I've just opened to float (rather than pin themselves to the top left of ph-shop?
Second ?:
When I open a photo.... work on it.... open a second photo....It opens and appears as a blank pallet, (as if there's no picture) but.... when I grab and move the image window with my cursor at the top border, the image appears... then when I release it placing it where I want to move it... the image disappears again. The image is visable the WHOLE time within the navigator panel.
I then have to restart CS5 in order to fix it... but then it'll happen 10 minutes later.
Photoshop :: Selecting Crop Tool - Image Disappears
Sep 9, 2012I have an image opened in PS CS6 I can see the image I select the Crop Tool The image dissapears completaly from the screen I select any other tool The image reappears again.
View 4 Replies View RelatedPhotoshop :: Cropping CS4 - Photo Disappears And Image Box Reduces In Size To About 1 Inch Square?
Jul 21, 2012After cropping a photo in cs4 i have tried hitting the return key as well as edit/crop and then my photo disappears and the image box reduces in size to about 1 inch square with no image. I have expanded the image box but nil photo. This has never happened before.
I reloaded cs4 onto my computer but the problem still exists. I have also tried out opening the file from Bridge as well as Photoshop with the same result.
AutoCad :: Rotated Image Disappears
Jun 19, 2012I've tried both draging an image into Autocad and importing it in as a block. When I try to rotates the image it either rotates around a point (but doesn't actually rotate itself) or rotates and disappears only leaving a white outline. How can I properly rotate an image?
View 3 Replies View RelatedAutoCAD Map 3D :: Z UCS Rotate In VP And Image Disappears
Mar 23, 2011One of our other issue(s) is the z ucs rotate in a vp and the image disappears!
Im thinking its to do with a slight angle change in the x or y plane when doing a z ucs rotate making the image not on the viewing plane anymore. Using 2011 map3d but using in 2d workspace mode. All it would take is 0.000000001 degree to throw it out of wack i would imagine. When setting vp back to world and plan rotate it appears again?
Or, because its map3d and not just vanilla cad, is the whole world space set on a geoid by default(viewing plain) and when you rotate the vp ucs it throw's it out of alignment and puts it below the geoid and then looses it's visibility? This would apply to rasters imported with map/ import / ecw, tiffworld or 2jpg i assume?
Illustrator :: Image Disappears While Tracing
Jul 2, 2013I have an assignment for school where I am suppose to trace an eagle onto another layer. However the image disappears while I am trying to trace it. Is this some sort of setting that I need to change?
View 6 Replies View RelatedAutoCAD Map 3D :: Data Connected Image Disappears
Mar 18, 2011I accessed an aerial image through data connect, adjust the the georeferencing, etc. Image comes in fine and no problems...
One day, I re-open the same file and the data-connected image is gone!
I try disconnecting and deleting the image, and then try re-connecting it but all I get is an error message "There was a problem adding data to Map."
3ds Max :: Wireframe Mode / Background Image Disappears?
Aug 29, 2011I'm modeling something and when I go to wireframe the background image disappears.
"Two hours of loose philosophizing will never tilt the scales against a sound belch."
Maya :: Image Plane Disappears On Restart?
May 24, 2011getting a weird problem. at first when I had 2 image planes (front and side) every time I saved my scene and restarted, they would both disappear from perspective view. but they were still showing in ortho view. I'd have to delete the image plane and make it again. after adding a back camera with its own image, saving and restarting: it started to have all of them show in perspective, but now front and side dont show in ortho.
edit:: the first issue happens in 2011. the second in 2012. back cam probably has nothing to do with it.
GIMP :: Disappears When Image Drag Onto Screen
Mar 3, 2013I have just downloaded Gimp on my iMac and when I drag an image onto the Gimp screen Gimp just disappears.
View 1 Replies View RelatedGIMP :: Move New Image Below Original - New One Disappears
Dec 2, 2012I opened an image, scaled it, changed the canvas size and pasted another image into it. When I move new image below the original image (where the gray checker board is located) the new image disappears.
I finally closed everything and started over. Same results.
Now what?
CorelDRAW Graphics Suite 12 :: When Exporting To JPG / Most Of Image Disappears
Apr 20, 2011every time I export my cdr file to a jpg, all but a small portion of the picture disappear. I've tried saving it in other formats and a few other things, but none have been successful. I've included print screens of what the picture should look like, what it does look like, and the export setting I've been using.
View 5 Replies View RelatedGIMP :: Aligning Layers - Part Of Image Disappears
Jun 25, 2013I'm a Gimp newbie, using 2.8.4. I have a png image that's 530 pixels wide. I'm trying to merge it with a white background layer that is 960 pixels wide. I need to align the image to the right side of the background layer. This is what I did:
- opened my image
- created background layer (960 px wide)
- made background layer the bottom layer
- clicked on Alignment tool
- clicked the hand cursor on the image (530 px wide)
- made the background layer the active layer
- set "Relative to:" Active layer
- clicked on the right alignment arrow
The image did move to where I wanted it, but most of the image from the right edge disappeared, so all I've got is a small portion of the left side of the image in the middle of my background layer. Then I did the following:
- merged visible layers with Expand as necessary
That action merged the layers, but all I have is a small part of my image near the center of the background.
Attached File(s) Screenshot from 2013-06-25 19:41:24.png (59.32K)
Illustrator :: Image Disappears After Applying Rectangle In Adobe
Feb 12, 2014I am having a problem that may be a simple solve (but not for me). My image disappears after applying a rectangle to it. I have tried "bring to front" and don't know what else to try.
View 1 Replies View RelatedCorelDRAW Graphics Suite X6 :: Image Disappears When Resizing / Scrolling
Feb 21, 2013After intalling my new mouse (Logitech Corded Mouse M500) scrolling/resizing makes the image disappear in a short time 2-3 minutes. I read about it in older versions, only happens with this mouse.
How can I fix it? I've just brought the mouse, seems very good, the older one is unuseable (lacks accurancy due the cheap IR sensor).
CorelDRAW X5 :: Cropping CDR - Part Of Image Disappears Within Crop Window
Sep 26, 2010When I crop a cdr image, part of the image disappears within the crop window. Clicking inside the cropped image reveals node locations as if the image is still there but the black lines are invisible. But, there are some objects visible in the cropped image.
View 3 Replies View RelatedAutoCAD Civil 3D :: Image Disappears When Zoom In Geomap Mode
Oct 8, 2013i inserted an areas image with geomap but as i zoom cloce the image disapears and i get a tile with a white image of a camera. can i disable it? it is very annoying.i dont care if i loose ressolution if i get closer .why autodesk did that?
View 3 Replies View RelatedLightroom :: 4.4 - White Balance Selector Disappears When Moved Across Image
Jun 1, 2013I am using LR 4.4 on an iMac. Why the White Balance Selector tool would disappear when moved across an image?
it seems to change to a vertical line with an arror top and bottom.
The areas of the image on which it disappears seem to be consistent, in other words, it disappears on the same portion of the image eveytime.
UPDATE: Since posting the above a few minutes ago I've noticed that my cursor is behaving eractically. For example, on a different image to the one used above, in the library module using the Loupe the cursor changes from a magnifying glass to an arrow pointing to the right. It does this on the same part of the image every time.
Lightroom :: Select The Crop Tool Image Disappears During The Entire Crop Process
Jun 2, 2008when I select the crop tool, my image disappears during the entire crop process. I can only see the image in the preview pane. Why is this happening? I am using the most current version of Lightroom, and I am on a PC.
View 1 Replies View RelatedPhotoshop :: Disappears
Jan 8, 2007I have tried everything that i can think of. I use a mac and when i try to load photoshop everything appears to be working normally. I see the box come up and the tools loading and then nothing! Gone! I did a search and deleted any adobe items including the program and tried reinstalling and it still happens. I have tried installing DIFFERENT versions of PS and it still happens. What should I do? Reinstall my operating system? I'm using 10.4.8 and have plenty of memory left as well ...
View 3 Replies View RelatedPhotoshop :: The Underline Disappears
Feb 19, 2007Definitely one of the most bizarre things in my 5 years in PS.
I have image with some text. I forgot to do underline, so go back and underline some text. which I need as link indicator for web page link.
I save for web, jpeg looks great, but when copy that jpeg anywhere, to website folder, or evern desktop, the underlined word is no longer underlined.
Photoshop :: Rectangles Disappears
Jun 17, 2008I use the rectangle tool to draw two rectangles where I use blending options to set opacity to 0 (no fill). But when I draw the second rectangle the first one disappears. How do I see both rectangles at the same time?
Another thing. How do I change linesize for the borders for the rectangle?
Photoshop :: Configurator Panel Disappears
Sep 14, 2012why the content of a Configurator panel dissapears when I leave Photoshop and return? The panel loads fine at startup but when I go to another app and return, the panel is empty. The name of the panel is there, just no contents.
View 2 Replies View RelatedPhotoshop :: One Plugin Installs - Another Disappears
Feb 26, 2013I've recently installed CS6 on a new Win 7 64 bit machine.
I'm beginning to install various plugins (Topaz, Nik, etc.).
I think this is the correct procedure, but let me know if it's wrong: I open Photoshop, go to Edit, Preferences, Plugins, then check the "additional plug-ins folder" and choose browse. I navigate to the main folder for the product I'm looking for. For example, Topaz... I'm using 3 plug-ins: Detail, Remask, Adjust. I highlight the folder, click OK, close PS, then reopen it. I open an image, then go to Filter, and find that all three plug-ins are there. I open each one, make sure that they are activated with my activation key, then close each application.
I then went back to Edit, Preferences, Plugins and browsed for the next plugin folder. In this specific case, it was Portraiture, by Imagenomic. I highlight the folder, click OK, close PS, re-open, and when I look for this plugin under Filter, I see it. But, now, one of the Topaz plug-ins are gone. It always seems to be the Topaz Adjust. If I navigate back to it, re-do the plug-in from PS, then the Imagenomic plug-in disappears next time I open PS.
In each case, I just highlight the main folder (Topaz, or Imagenomic), not the Topaz Adjust folder (though I did try this, and it made no difference).
Photoshop :: Drop Shadow Disappears?
Nov 19, 2012I created the text with a drop shadow.
But as soon as I flatten the image or merge visable the drop shadows disappear.I had to actually take a screen shot in order to show what I'm talking about.
Photoshop :: CS6 - Cursor Disappears Under 20 Pixels
Jan 29, 2013CS6 Photoshop. Why does brush cursor disappear under 20 pixels?
View 2 Replies View RelatedPhotoshop :: Mouse Pointer Disappears In CS5?
Oct 5, 2012I am on a Mac Pro with Magic Trackpad. Using Photoshop CS5, the cursor/pointer disappears after a while, and I have to switch to another application, then back to Photoshop to bring it back. The pointer does not disappear over the image window, just over the tool palettes, toolbar, menus, etc. This is a recent development, and I've only ever seen it in Mountain Lion. None of my previous systems exhibited this behavior.
View 2 Replies View Related