I have been using the radial filter with no problems.Now it will not display the circle or ellipse. it seems to be working as when I try to do the circle and it will not show but if I change the exposure or any of the setting it does do that.
Have I accidently changed something or a setting to cause this .
lightroom 5 radial filter is not working. It was working fine, but now I can't apply a radial Filter at all.
View 3 Replies View RelatedThis is the first time I have tried to use this filter, all the other filters, brush, grad & healing, work correctly. When selected the + curser appears but no amount of clicking & dragging will yield any selection.
LR 5.3 Windows 7 Pro 64
I've been seeing screenshots all over the place of Lightroom 5 that displays a number of tools under the Radial Filter, including one for moire. That's a big part of why I decided to join Creative Cloud, but in my version of Lightroom 5, there is no such tool.
View 6 Replies View RelatedI am using the trial of LR5. I have made some adjustments with the Radial Filter. When "opening as a smart object in CS5," the radial filter adjustments do NOT show up. Crop does, basic exposure adjustments, but no radial filter.
Would it show up in CS6? I do not want to go to CC.
encountering a problem with radial filter when sync it to multiple images? I am getting a different dimention and position every time I sync or press previous. For the rest of the settings are remaing the same.
View 13 Replies View RelatedI am able to create radial filter in LR 5, then move it to the edge, then move it outside the photo. Then its center is not visible in workspace at all. How can I access it again?
Graduated filter works ok, its center is always inside the workspace.
Suddenly while working on may images in LR5, doing all the usual with Development module I've realised that Radial filter effect is not being exported to CS5; all others ark: healing, spotting, grad filter, and brushes are ok.
View 3 Replies View RelatedUnable to see the lines of the Graduated filter tool or the outlne and handles of the new Radial filter tool. They were visible when I first installed Lr5 and used them on several photos
View 4 Replies View RelatedIn addition to my continual problems with getting the color output to match simulated print colors of CMYK on screen and .png printouts, I now find that upon PDF export, you can see the boundaries of an ellipse and a shape. I wanted to create a corona-style effect around the sun, so I used an ellipse and a shape, both with transparencies applied. (Edit to add: this is a design for a card deck.)
When I print the PDF export, (see the "PDF boundaries" image), the colors look way off and you can clearly see the circular boundaries of the ellipse and/or shape; it will do it on either one. All that should be visible is the white "corona" around the sun, which is subtle and indicated by the blue arrow pointing to it on the image "Sunrays."
Having discovered this problem, I've experimented with all sorts of variations of trying to get that corona, including the "glow" effect, but don't know how to change the color of the glow, itself. But it shouldn't be printing those boundaries to begin with, so something is off somewhere.
I'm exporting with PDF/X-3, 300 dpi, Limit bitmap resolution to rasterization resolution, JPEG quality at 100, exclude invisible layers.
I'm trying to put a text around a circle / arc.
I'm able to create an ellipse with the select tool, create a path from it and then add a text "along the path". Unfortunately I can't specify on what position of the arc/ellipse the text should start (left-upper corner, middle, right upper corner, etc.).
I am trying to create a 3D elbow that is Ellipse at one end and is circular at the other.
I've attached and example of what im trying to make.
Elbow.jpg
how to join line or polylines with ellipse arcs or circle arcs and now.. I give up! Here is my problem: What I would like to draw can be compared with a pear: a succession of circle arcs ellipse arcs and maybe polylines. Once the profile done, I was planning to use REVOLVE or (EXTRUDE + FLLET) to finish my drawing... the problem is that I can't join 2 ellipse arcs from different ellipses (which means neither with a circle arc. How would you proceed to draw a pear?
PS: I'm using autoCAD 2006 z.54.10 version
I'm trying to draw a circle and an ellipse so that the ellipse shares exactly two points of contact between the two paths (not centered).
This is seemingly impossible with the tools provided since, if you draw an ellipse normally, with the anchor points of the ellipse on the circlular path, there are four points of contact, which means the two paths overlap.
I've tried revolving a line segment that goes from the edge of the circle to the middle of the circle (not center) with similar results.
Drawing the ellipse first doesn't work either.
Astute Graphics has a plug-in, Subscribe that would almost work, except it only draws circles, not ellipses.
Am I overlooking someting extremely obvious, or am I correct to say that illustrator can't do this? I'm using CS5. Maybe this is something that is fixed in CS6 with a snap to path option?
I have this cirlce that I have filled with a radial gradient fill that I would like to place an image inside of. The problem is when I put the image in there the background of the image is white so the gradient does not show through...how do I fix this?
View 14 Replies View RelatedI would like to draw a Circle with the Ellipse tool and then add a Vector Mask
next i would like to Duplicate the layer and then select the Vector Mask Thumbnail in the layers panel so that when i select the Pen tool the Intersect Shape Areas is available
however, i cannot seem to get the Vector Mask to be available it is always grayed out no matter what i try to do.
i am trying to add a "glossy" effect to the circle by using the Pen tool to draw a shape through it horizontally and then up and around the top of and joining/closing it so that i can add a white>trans gradient.
Using Ps cs6 and Windows 7
I'm making a logo for someone by hand-drawing a font I made up. But because I was having trouble drawing a perfect letter 'O', I'm using the "Circle/Ellipse" tool to do it. I drew an 'O' with that tool that's almost the right size... and I wanna draw another one just a little shorter... but I can't figure out how to place the completed new shape directly over the old one.
I don't know where to start the action with the tool! The completed shape always ends up in the wrong place. How to get my finished shape to complete just where I want it to? (Re-sizing the shape won't work because that changes the thickness of the line I used for the letter 'O'.)
I'm trying to snap a circle created with the Ellipse tool to the grid. However, the center of the circle won't snap to the grid, it's always the edges.
My circle is 4.7mm and my grid is 10mm with 2 subdivisions. How to get the center of a circle to snap to the grid?
how can I draw a circle with 285 ticks or small dashed lines along the rim U know just like the 360 degree compass.
After that I want to write text following the path of these ticks.In other words radial text so the whole thing would like like rays of text coming off that circle.
I'm missing the Center Pin, Ellipse, Feather Handle and the Focus Ring when I select the Iris Blur filter. The pointer is a tack symbol and am unable to change that.
View 5 Replies View Relatedi am using photoshop CS. Whenever i try to use a filter, only about 3/4 of the filter's window is displayed as shown in the link below...
I can't rescale the window any further! Do I have to customise something to make it display fully?
I dont have it in my custom shapes and was wondering if i would be able to download it from some where.... anybody know where? need the radial blur like in this background.
View 7 Replies View RelatedWhen I first installed LR5 I was able to copy Radial Filters by holding down the Alt key and moving the filter round. I could copy the filter as much as I wanted. However this action now just moves rather than copies the filter. Using AltGr does it but with reduced effect so pretty useless.
View 5 Replies View RelatedI want to display the IPTC metadata in Lightroom 4 in the same way as in Bridge CS6 so that it only displays the fields I want to use - is this possible without having to install 3rd party software? I've tried the metadata pop-up menu selections but these either omit items I want to see or include many items which I don't use. I bought Lightroom because it was designed for photographers but I am discovering that there are a number of areas where it is not as flexible as Bridge.
View 8 Replies View RelatedJust updated 5.2 (win7 x64) All my collections show, but everything in the library is blank. Develop also shows just grey?
[URL]
Displaying the Library on a second monitor?
View 10 Replies View RelatedI am having all sorts of problems with Lightroom 5.2 and wish I'd just stayed with Lightroom 4. I've already posted about not being able to import directly from an SD card in my laptops reader, and have at least found a work around to that (copy files to hard drive them import - I see others have found the same thing and it works just fine).
Now I have realised that the map screen in the map module is blank. I had this problem initially with Lightroom 5, and then it seemed to resolve itself. It is refusing to resolve itself in Lightroom 5.2 however. I've searched on the web for similar problems, and have found some responses to blank map screens in Lightroom 4, but they are so technical I haven't got a clue where to start trying to follow them.
So, I am a simple soul who needs a simple answer. I am using LR 5.2 on an HP laptop running Windows 7. In the map module, where I already have GPS data (from a Canon EOS 6D) it is displayed in the metadata, and the little pop up box shows the number of photos at selected locations etc. But the central map screen is black. If I search, the screen stays black although it appears as though it has gone to the location. The Navigator screen is blank too. And yes, I am connected to the internet and LR5.2 seems to be able to find the internet (I checked by going into the web module).
I like to put GPS locations on my photos prior to upload to Flickr, and whereas they are there from photos from my 6D, they don't exist for photos taken on my Canon Powershot.
as I've come from PSE, the terminology might be a bit different.
1) Displaying Keywords for a photo - In PSE, the properties panel can list all the Tags associated with a photo. The only way I can see the keywords for a photo in LR is to go to the keywords list, expand all the sub levels and look for check marks. Is there a simpler/easier way?
2) Displaying a photo for a keyword - I have a keyword which has a count of 1 against it. If I try to filter by that keyword (by clicking the right arrow next to the count) nothing is displayed. I tried making a collection with just the keyword specified and it contains one photo but again nothing is displayed. I suspect that it might be something to do with version sets brought over from PSE but I've tried unstacking everything and still can't find the photo.
In a Lightroom slide show, how do I display the filename with each image?
View 1 Replies View RelatedFirst of all, I'm very happy the new version of Lightroom handles FujiFilm X-E1 RAW (RAF) files fast and efficiently.
But I have a feeling the colours aren't quite right. The X-E1, and its brothers, are known for their incredible colour reproduction and wide dynamic range in a compact format. When shooting native JPEG's with, or without shadow compensation settings in the camera, the resulting JPEG files has a clear FujiFilm identity. The colours and luma and are very even all the way from the shadows to the highlights. But when loading a RAW (RAF) file into Lightroom (v4.4) the colours, still untouched, aren't at all the same, and not the luma either. Shadows are harsher, the skin tones and most colours actually are a tiny bit off. Overall I would urge you to study this in detail and give us an optional Camera Calibration profile or something, that will give FujiFilm justice here.
Does this make any sense to you, or am I just being picky here?
I went from Lightroom 4 to 5 yesterday. No problems, it went smoothly. I uploaded new photos, edited some. Then I used the new clone and heal. Fine. Love it. Tried another image. My fingers were on trackpad and I must have inadvertently changed the way my edit options show. No longer have the main top features after crop tool, clone, heal, etc. Histogram displays. Clone, heal, etc, display. Then it goes straight to tone curve and features below that. How do I get the edit features and sliders back on my Lightroom window?
View 2 Replies View Related