AutoCAD Civil 3D :: Path Array For Slope Labels?
Apr 4, 2012
I have a polyline defining a proposd wind farm access track and I have offset it 10m each side. I have then dreated a slope label between the southernmost end points which gives the existing ground slope at right angles to the centreline. I created the Array (as shown in arrayed.jpg) and it looked good but after hitting enter there were only three labels (after enter.jpg)
I did a rectangular array of slope labels with no problem at all so what's wrong with the way I'm doing the path??
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 3 Replies
ADVERTISEMENT
Dec 27, 2013
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
View 2 Replies
View Related
May 13, 2013
I have surface percent slopes labels in my drawing. I want to change the current style precision to only one decimal not three and I don't want to see the negative in front of the slope value.
View 1 Replies
View Related
May 26, 2010
I'm just trying to figure out how to label my surface with slope values in Degrees. The existing options are rise/run, percent...
View 4 Replies
View Related
Sep 21, 2011
C3D2011
Say you have a feature line in plan view and you project it to profile view. Is there a way to label the true slope of the projected feature line segments in profile?
The profile view depth labels are not accurate since it's simply calculating the length from station to station in profile.
...and of course this does not correspond to the true segment length since the feature line is not parallel to the alignment.
View 9 Replies
View Related
Oct 30, 2013
I notice issues using spanning pipe labels for the first time recently after having used them for years. The slope calculated by the spanning pipe label is completely wrong. I've attached a picture in which Labeled two pipes connected by a null structure. The two labels on the bottom are the pipes labeled individually at 3.53% and 3.34%. When labeling them as a spanning pipe, if I choose the downstream pipe first and them the upstream pipe it shows me a slope of 0.48%. If I choose the upstream pipe first, then it gives me 2.88%. Either way it's wrong.
As I was writing this I decided to check and see if the pipes were flowing the same direction (Start to End or End to Start). Turns out they weren't. After flipping one of the pipes around so that they both are laid out in the same direction (Start to End from Upstream to Downstream) the label now reads 3.37%, which is correct.
Seems like an the label should honor the flow direction of the pipe, no matter if they have been laid out in opposite directions or not.
View 1 Replies
View Related
Oct 25, 2013
I am trying to draw an alignment for a road. I want the alignment to represent the outside of the curve as the road climbs up and around a mound. Is there not way to do this in Civil 3D?
[URL]
and now I am thinking I will have to do this manually, extract contours, and trim/extend my way to victory...I really would like to have this in a dynamic situation so I can make adjustments. Also, it would be adventageous to have the line actually follow the grade so I dont have to add curves in etc later...
View 3 Replies
View Related
Sep 19, 2012
I'm trying to use the PATH array feature on 2013 to array stairs, and I can't get the array to be 100% accurate. It seems like CAD rounds the decimal to the nearest 3/4" which could be causing the problem.
I set my run to 10.5" and rise to 7.25", array along the angle of the stringer, and there's always a small overlap on the stairs. The "distance between" should be 1'-209/256" and CAD rounds it to 1'-3/4" which is where I believe the error is. Is there any way to fix this or array this correctly? Otherwise...back to the COPY method I suppose.
View 4 Replies
View Related
Aug 20, 2012
Can you not perform a slope-slope intercept to place a PVI? Essentially holding the sta and elev of the PVI's directly before and after the PVI of interest and changing the grade in and out so that the sta and elev of the PVI of interest are changed.
View 2 Replies
View Related
Mar 22, 2011
Can't figure out how to match gutter slope to outside lane super subassembly slope. Have super eop targeting a feature line with elevations, but when i check section editor gutter slope doesn't match pavement slope.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
View 9 Replies
View Related
Jan 22, 2013
i need a shoulder subassembly that varies slope in relation to the lane superelevation slope. i know that i can get a subassembly for the shoulder that will follow the alignment superelevation xml data but in my case i can't use it because we are just adding a shoulder to an existing road. we're not changing the superelevation of the existing road, just milling and overlaying and widening. right now i've created a profile of the outside edge of the shoulder that gives me the correct shoulder slope but whenever i change my centerline profile i have to redo the shoulder profiles which is a real time suck.
View 9 Replies
View Related
Aug 13, 2012
I am in the process of transitioning from land desktop to Civil 3D. I design roads in steep terrain and sometimes need to have my catch (daylight) slopes change. So my question is, how do I change a daylight slope at a specified depth? For example, from the shoulder of the road I want a 3:1 fill slope to a depth of 10 feet than change to a 2:1 slope until it catches the existing surface. Can this be built into a subassembly such that if the fill is less than 10 feet it will daylight correctly at a 3:1 and if the depth is greater than 10 feet then it carries the 3:1 for 10 vertical feet and then changes to the 2:1 until it daylights?
View 9 Replies
View Related
Sep 18, 2011
I would like to arrange equally spaced circles around an ellipse. I understand I can do this with the Divide command, as referenced in a previous thread on a similar subject
[URL].......
But I thought I could also use the Path Array command using an ellipse as the path.
What I get is the replicated objects (small circles) following some totally random path. Strange that this happens only with an ellipse - seems to work OK if the path is a circle or spline.
View 9 Replies
View Related
May 3, 2013
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
View 9 Replies
View Related
Apr 24, 2012
Path array of a point on spline, I’m wondering why the path array of a particular point on the spline doesn’t force the points to lie on the spline itself!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 3 Replies
View Related
Sep 22, 2013
Is there any way to fill inn attributes on individual blocks belonging to an associative path array?
View 7 Replies
View Related
Mar 16, 2012
How to array an object with the ARRAYPATH using a polygon as path? I am getting bizarre results.
I am trying to array a block using a polygon as path.
View 7 Replies
View Related
Dec 11, 2012
I have a polyline path and a rhombus. I will like to array the rhombus along the polyline path. As you can see from the attached file, as the object rotates along the path, it shift off the path such that the distance between the rhombus and the path changes esp at the turn. How can I keep this distance between the rhombus object and the path constant?
View 7 Replies
View Related
Jun 13, 2013
Is there a way to change the default setting for the Array path command?
When I use the arraypath command I:
1st - Select Object
2nd - Select path curve
3rd - Type in "I" for Item to change to my desire spacing.
View 9 Replies
View Related
Jul 19, 2011
I am creating a set of parametric stairs. All of my constraints are in place for my 2 main work points. I am now trying to make an associative path array to depict the stair treads. Path array works great initially, however when I change my variables for stair height, my stair treads tilt with my work line in such a way that they're no longer parallel to the floor.
The angle of the stairs must be variable as it will change from one set of stairs to another. All that said, I am wondering if there is some variable or command that will make the treads retain their ucs orientation regardless of the angle of my path line. I've tried every option while creating the array with no luck.
View 4 Replies
View Related
Aug 22, 2013
Trick to keeping objects aligned with a helix when using an associative path array? The animation below demonstrates the problem where I can't seem to keep the "treads" on a spiral stairs aligned with the center of the helix. (fewer objects accentuate the problem)
View 3 Replies
View Related
Jul 1, 2013
The undefined areas of a slope map now have a hatch to them and are plotting black. This map was created a month ago in 2012 without issues, upgraded to 2014 and now the undefined range has hatch!
View 8 Replies
View Related
Jan 2, 2012
I have a TIN Surface, and I want to get the slope at a point (know X and Y).
Working Civil 3d 2010 and API.NET
View 9 Replies
View Related
Oct 30, 2012
I have a simple driveway corridor along a steep hillside. For cut, I would like to have a negative slope away from the shoulder edge. I have tried numerous approaches and all 'cut' reverts to positive. I searched and found no clear answer. It's such a short driveway, I can 'fake' it in, but I would like to calculate quantities.
Using 2012 sp1, 64bit, windows 7
View 9 Replies
View Related
Sep 30, 2011
How does one get the array window in 2012 to open with the array command like it does in 2007
View 2 Replies
View Related
Jul 8, 2013
I've got a surface that displays contours correctly. When I go to Surface Properties-Analysis tab, I can set an arbitrary number of ranges for contours, directions, elevations, slope arrows, etc, and they display correctly.
I can set an arbitrary number of ranges in the slope range box too, but when I click the Analyze button, Civil 3D 2014 hotfix 1 only displays two slope ranges: 0% to 2979736.0077% and 2979736.0077% to 99999900.0001%. (!)
View 9 Replies
View Related
Aug 10, 2013
Can I automatically have my slope patterns introduced with a command like matchprop or something similar ?
I have 284 streets and it's getting ages to finish the slope patterns on every street. Civil Engineer / Infrastructure of metropolitan transports. URL....
View 6 Replies
View Related
Mar 21, 2013
I'm trying to match an existing slope design that has a soft rounded off top of slope. The toe (green) is a feature line and I'm using a 1-1/2:1 slope to natural surface grading rule. You can see the rounded contours in blue that I am trying to match.
View 7 Replies
View Related
Nov 7, 2012
in my link "link slope to surface", i have the slope set to -2.00%. in the cross sections, it is at a +2.00%. why is this thing not linking at the defined -2%? see image.
View 1 Replies
View Related
Dec 3, 2013
I need to project a surface/grading (or something of that nature) across my berm and have it intersect with the inside bank. This is better explained if you see the attached image. In the plan view you see 4 featurelines. Outside TOE, outside TOB, inside TOB then inside TOE. I need to project the outside TOE across the berm (shown in the section view) then create a new featureline where the line and inside slope of the berm intersect. Note that all the elevation shots vary as does the widths across the berm. What's the best way to do this?
View 9 Replies
View Related
Feb 20, 2013
What formula Civil3D uses to calculate the average slope of a surface?
The formula I am using is S = I*L/A
S = Average Slope
I = Contour Invertval
L = Length of Contours (ft)
A = Area of parcel (sq. ft)
I just had to do four parcel calcs and the percentage I find using the formula is always 1-3% lower than the percentage Civil3D spits out. I can't find anything about how Civil3D arrives at that number, it just appears. I assume that Civil3D is more accurate but I can't give that number to a client without knowing how the program arrived there.
View 1 Replies
View Related
