AutoCAD .NET :: Get Each Cell Value Into Array?
Jun 22, 2011
I need to get the values(textstrings) of some AutoCAD table cells into a string array, but I am having troubles. I have the proper table and I can get the contents of individual cells using acTable.Cells(1, 1).TextString, etc... but I cannot seem to remember how to get each cell value into an array.
See code below:
For Each acCell As Cell In acTable
If acCell.TextString > Nothing Then
strArray() = acCell.TextString 'Does not work
End IfNext
View 3 Replies
ADVERTISEMENT
Sep 30, 2011
How does one get the array window in 2012 to open with the array command like it does in 2007
View 2 Replies
View Related
Sep 19, 2012
I'm trying to use the PATH array feature on 2013 to array stairs, and I can't get the array to be 100% accurate. It seems like CAD rounds the decimal to the nearest 3/4" which could be causing the problem.
I set my run to 10.5" and rise to 7.25", array along the angle of the stringer, and there's always a small overlap on the stairs. The "distance between" should be 1'-209/256" and CAD rounds it to 1'-3/4" which is where I believe the error is. Is there any way to fix this or array this correctly? Otherwise...back to the COPY method I suppose.
View 4 Replies
View Related
Oct 13, 2011
I am creating a table where I want the cell contents to be aligned Middle Center. I can set that up in the table definition and it seems to be in place once the table is in the drawing. If I type text into the cell the alignment is as expected. Whenever I type a number the aligment changes to Top Right. I can go back into the cell and reset the alignment to Middle Center. If I then delete the cell contents, exit the cell then return to the cell and enter a number the alignment returns to Top Right. I want the table to start off empty so others can enter informaiton as it becomes available. Is there a way to have the cell alignment stay the way I wnat it regardless of what I enter into the cell? I tried changing the cell format to text but the instant I entered a number it switched back to a number format and aligned Top Right.
View 2 Replies
View Related
Feb 11, 2012
I want to split cell (from one cell to two cell) in table.Because I want to put separate text in these cell as shown in pdf.
Attached pdf file.
View 1 Replies
View Related
Dec 3, 2011
I am trying to find out which Cell in a table is being / has been modified, in AutoCAD 2011 with C#.
I have subscribed to the Table's .Modified event, but when this is triggered by modifying some MText in a Cell, the Table's .HasSubSelection property is false and its .SubSelection property throws an exception. Conversely, modifying the MText in a Cell does not trigger the Table's .SubObjectModified event.
I noticed a class called Autodesk.AutoCAD.Internal.Reactors.TableSubSelectFilter which has a event called CellSelected, but how to instantiate such a class for the Table and subscribe to this event.
How Autodesk intends you to determine which Cell of a Table has been modified?
View 1 Replies
View Related
Jul 29, 2009
I am currently using 2008. I have data linked an excel sheet to a table in my drawing. That part works fine.I am trying to link cell values in that table to block attributes using fields-object-formula-cell.Numeric values transfer to my field OK but values containing letters or full words transfer as #####.This appears to be the 'way it is' in 2008.
View 7 Replies
View Related
Sep 14, 2012
How to import data from excel (from particular cell) to AutoCAD Drawing. I have already Created a template for both Excel and AutoCAD. I want to do Whenever i am changing the datas in excel sheet corresponding changes to be done in AutoCAd drawing.
I am using AutoCAD 2010 and Microsoft excel 2007.
View 7 Replies
View Related
Dec 11, 2012
Is there a trick in using a dynamic block in a table cell? When a dynamic block is inserted into a cell, any visibility can be viewed (Properties Manager) in that cell if the visibility state has a block in it. What happens if the visibility state does not have a block. That is, if the view has exploded block so one can use parts in actions etc? Can I view ANY state in a cell regardless if it has a block or not? Or must the visibility states have blocks to be able to use it in the table cell?
View 2 Replies
View Related
Jul 1, 2012
I create Table using Autocad .net api C#.
var table = new Table();
In single text(class DBText), change text width of the property - WidthFactor.
How change text width in table cell using autocad .net api C#?
View 4 Replies
View Related
May 31, 2013
I have set up several tables inside autocad that have one cell as the input cell and after regen the others perform calculations based on that cell. I want to write a command that uses the same value as the input value to draw the arc to scale. I tried using the table value as is called out in the cell field:
^C^C_arc 36,6;e;0,6;r;Table(8796085192704).A3;.
Is there anyway to get a value from a cell inside autocad and put it into my macro so I can draw an arc of the radius shown?
View 1 Replies
View Related
Mar 4, 2012
(Again) Switching the “data type” of the cell,I’m not sure why the AutoCAD doesn't allow changing the “data type” of the cell in the table for already existing data. For example, in the attached table, I wanted to switch the “data type” from “decimal number” to “percentages”, but sounds that the AutoCAD doesn’t allow this function.
In the Excel, for example, we can switch the “data type” easily by selecting the target cells and choosing the format we need! Quite simple, in the AutoCAD, it seems that it needs some work around!
View 3 Replies
View Related
Sep 13, 2011
In ACA2008 there seems to be a maximum of 10 Cell Styles allowed in a Table Style? When I try to make a new 11th style, one of the existing 10 styles gets supplanted by the new style.
View 3 Replies
View Related
Oct 9, 2013
Is this possible if i can change the column names, not a cell. For instance: Name of the column is "Full Description" to become something else? Or add a new column with my own description?
View 1 Replies
View Related
Aug 5, 2011
How can I copy existing (in the drawing) text / mtext into a table cell? I found programming solutions but I want to do it manually (one time job).
I tried Copy / Paste but it does not seem to work.
View 1 Replies
View Related
Nov 1, 2005
I want to be able to edit text by editing a cell in excel. I am not sure if there is any way to do it with AutoCAD LT 2004 and Microsoft Office Excel 2003.
View 2 Replies
View Related
Feb 11, 2012
I have been made one load schedule for distribution panel by using table command in autocad. In that table, I have to mention load with units(watts) for each circuit in cell. (example: 6000w).
If I put like 6000w in a cell, the sum formula's is not working. These formula's used to get total load of panel. what should i do to rectify this problem? How to mention this units in a cell?
View 2 Replies
View Related
Apr 28, 2012
I working with one schedule dwg by using table command. I could not able to edit text in a cell while i double click, inside the table cell. But i can edit by using right click method. before it (double click) was working. now i dont know what happend.
View 3 Replies
View Related
Jul 7, 2011
In ACA2008, can the display of each of the four edges of a cell in a table be controlled individually? I want left and right edges of cells to display, and top and bottom edges to not display. In the Cell Border Properties dialog box, I can set the Lineweight, Linetype, and Color of each edge, but I don't see how to set the visibility of each edge.
View 4 Replies
View Related
Mar 6, 2012
how can i draw a line/arc inside a cell in ACADTable.
View 2 Replies
View Related
Aug 19, 2010
I have tried:
Table.SetCellType(0, 0, TableCellType.BlockCell)
result:
Warning 1 'Public Overridable Sub SetCellType(row As Integer, col As Integer, type As Autodesk.AutoCAD.DatabaseServices.TableCellType)' is obsolete: 'Use Cell functionality instead.'
Then i tried:
Tbl.Cells(0, 0).CellType(TableCellType.BlockCell)
result:
Error 1 Property access must assign to the property or use its value.
Then I tried:
Table.Cells(0,0).CellType = TableCellType.BlockCell
result:
Error 1 Property 'CellType' is 'ReadOnly'.
View 4 Replies
View Related
Aug 29, 2012
Is there a way to unlock a cell using lisp. I have a datalink that is used to create a table. Once the table is selected I have a command that will format some of the cell style (which will let me while locked), but it I cannot seem to find a way to unlock them to merge a couple of cells. I can manually do it using the table toolbar, but programmably I am a little stuck. I can see if it is editable by using the vla-iscontenteditable and it will return :vlax-false. I do not see a vla-setcontenteditble or something to that effect.
View 3 Replies
View Related
May 27, 2013
What im trying to do is take the i properties from an inventor .dwg, and place them into a specific excel spreadsheet. I've managed to get so far, by using code that Curtis posted, which does the opposite of what im looking to do.The code Curtis posted takes info from excel and fills in iprops.
I can fill in specific cells, for instance columns A, B & C on Row 1 and place that info into a specific spreadsheet. But my code falls down when i run the code on another .dwg, It obviously overwrites what was previously in those cells.... I am looking for the code that looks to see if those cells are in use, and if so, go to the next available cell down.
View 6 Replies
View Related
May 14, 2012
I have a table, in cell D3 I have inserted a field containing a system variable. The contents of the cell looks like this,
%<AcVar dimadec>%
I want to put in cell D2 the name of the vairable that is in cell D3 - I have tried the following,
%<AcExpr (D3).ObjectName>%
%<AcExpr (D3).textstring>%
Is there any way to reference the name of that system variable contained in cell D3? I want to do this to prevent errors by curious new users that may edit the table, I want the table to reference itself so that the system variable being read is always related to the correct system variable name.
View 6 Replies
View Related
Jan 9, 2012
was wondering if it's possible to bring in the value of a single Excel cell into a predefined window area in AutoCAD LT 2012? Some of our tool and die calculations are done in Excel, but we only want one cell (equation summary or description) brought into to AutoCAD 2007. If not AutoCAD LT 2007, then what about a more recent version of LT or even full blown AutoCAD?
View 1 Replies
View Related
Apr 17, 2012
I've created a data link, linked to my autocad drawing, checked the box to keep excel formatting and update. Once i Import the table, the size of the table is NOTHING like what the size is in excel.
I have my page layout in excel to be 11 x 17 landscape. I have my table at about 9 1/4 x 15 landscape. Once I import it into autocad, it is now about 6 3/8 x 20 1/4. I don't know what i'm doing wrong but i need it to transfer just like it is in excel as far as the size of it.
View 2 Replies
View Related
May 23, 2012
I am looking for a way to customize the dimensions of Autocad Tables to that I can have custom cell height and width.
How to do this?
Table v1.dwg
View 5 Replies
View Related
Jul 27, 2012
I am new to Civil 3D upgrading from LDD2009. I am trying to edit some point descriptions brought in through a fieldbook import through my survey database. Under my survey database in Survey Points I hit EDIT POINTS and it brings up the SURVEY POINTS EDITOR. My points are listed as white observed points but when I click on the description cell it won't allow me to change anything.
View 7 Replies
View Related
Aug 19, 2013
I have created subroutines to build tables in AutoCAD.
What I would like to do is to is if a value in the table list (example a question mark), then make the background color of that cell color 1 (red).
List to insert as a table -
(setq List_Table (list (list "A" "?" "C" "D" "E") (list "11" "12" "13" "14" "15") (list "21" "22" "23" "24" "25")))
(Build_Table "Title" List_Table 3 5 0.1 1)
Here are the subroutines -
(defun Build_Table (TableName List_Table NumRows NumColumns RowHeight ColWidth /); P0 Table_Obj KW KK KT KL Blocks_Obj Block_Obj Block_Id)
;--set table scale-------------------------------------
(setq Dscale 1.0)
;--get location----------------------------------------
(setq P0 (vlax-3d-point (getpoint (strcat "
[Code] .......
View 3 Replies
View Related
May 18, 2012
I am using a link to an .xls worksheet to populate a General Table in my .idw (Inventor 2012). See attached. The blank space underneath the first lines of information will always be blank, no matter how many rows we get. Is there a way to have the drawing hide the blank/empty cells, make the borders invisible, etc?
I have tried using the Insert Object for an Excel file instead of using the Table feature, but it does not appear to be an updatable link. As in, if I change data in my .xls file, it won't update the inserted object to the same info.
View 3 Replies
View Related
Dec 6, 2011
We are using inventor 2011 and I would like to make the text wrap where I want it to not where the cell length determines. Can I do this in the ipropeties of the part? When I edit the parts list to move wrap the text manually the text turns blue of course, but this also negates the updating of parts automatically. In the part I use an expression to ensure that the description reverts back to the iproperties of the part ie =<G_L> X <G_W> - <MATERIAL>. I would like it to insert a text wrap then proceed to the next line with <STOCKNUMBER> - <PARTNUMBER> so I would look like:
12" X 6" - G40.21-44W
PL. 1/2 - PL-100
View 3 Replies
View Related
