AutoCAD Inventor :: Can Split A Model In Half And Then Mirror It
Dec 29, 2012
I decided to model an industrial iron caster wheel with polyurethane tread, and all went well. Tonight I added three ribs to one side of the caster wheel, which looks great, but I would rather not repeat the process on the other side because of all the fillets and such which would have to be repeated.
Is it possible to split the wheel down the middle and then mirror the side with the ribs? I saw that I can split the model with a plane, but I can't figure out how to remove the geometry on the left side of the plane.
View 9 Replies
ADVERTISEMENT
Apr 23, 2013
I want to mirror cut the models "selected" portion but it gives me result very far to it which is highlighted with red in the screenshot.
View 1 Replies
View Related
Dec 19, 2013
I'm trying to split a part model for mold analysis. The complex cut line is along a variety of directions and axis. I'm using autodesk inventor 2014,
View 3 Replies
View Related
Jan 6, 2013
I have a ball mask to design (like a masquerade mask). Since this image should be symmetrical, how do I design half of it and then mirror it in Gimp?
View 2 Replies
View Related
Jan 12, 2012
Say you select all of the patterns on one half of the image.
Is it possible to mirror the selection, so that it selects the corresponding ares on the other half as well? Because it would cut down the workload by a fair bit.
View 4 Replies
View Related
Mar 24, 2008
I would like to take face pictures and split the faces in half. After that, I would like to use the left side of the face and match it to the reverse left side face together(having 2 left sides which will look like a normal face after the 2 sides will be brought together).
So:
1. picture of a human face (head)
2. slipt the face in half
3. remove the right side
4. highlight the left side and make a reverse image
5. put together the real left side and the reverse left side in one face
How that is possible with Photoshop?
View 2 Replies
View Related
May 31, 2013
In Publisher, I can split a A3 page in half with columns in each side with the middle spacing of 0.5cm, how do I do that in Photoshop? So when I print it off and fold it, each side is equal,
View 2 Replies
View Related
Aug 17, 2013
How to keep notes not change position in mirror linked model?
View 1 Replies
View Related
Oct 24, 2012
Untitled-1 copy.jpg
When the modify dimensions box is open, the 'roundoff' menu gives me 1/16", 1/8" etc, even when DECIMAL is selected as the unit format.
This wasn't happening earlier, not sure what's going on. [in fact in a solved problem from earlier, a colleague found a drawing that had units set to millimeters, had its insertion scale set to inches! Different computer, so not related].
View 3 Replies
View Related
Aug 4, 2011
I have a maya designed animation model file (filename.ma) with 3000 frames. I want to split it into 3 maya scene files each of which have 1000 frames.
How can I do this in Maya 2012?
View 2 Replies
View Related
Jan 8, 2013
In the weldment of a crane boom i have different parts. Some are identical, but (1:1) mirrored.ipt. Then I merge them in the BOM in order to set the qty on "2" in the partslist.
Here the error occurs: in the "mass" field in the parts list says "varies".
This keeps me from generating a good partslist and the total mass of the weldment maybe messed up. I personally think it has something to do with the fact that the parts are sheetmetals. i.e when I look atthe Physical properties of the folded / unfolded (of the SAME .ipt) they differ in the same way i see in the BOM.
View 9 Replies
View Related
Dec 18, 2011
I'm trying to find the most elegant (okay... any) way of making a simple half lap joint. Basically I just want it to update based on a thickness parameter or when the sketches update.
View 1 Replies
View Related
Dec 8, 2011
I am creating three shapes out of a pyramid. I figure if I split the pyramid in half, I can create two, then mirror them and blend the two together to make the final design. I have figured out how to create a pyramid by extruding a cube with a taper.
My pyramid is 40mm x 40mm x 40mm. I need to cut it in half, diagonally, top to bottom.
When I have the pyramid in the workspace, I see nothing that I can select - that will allow me to create lines where I need to - to cut them out.
I'll add a logo in 3-d that I am trying to create. (also, I am using this project to familiarize myself with the software.)
View 9 Replies
View Related
Feb 5, 2010
I have a purchase component set that includes 2 identical pcs. i.e. part number xxx01(.iam) consists of part01(.ipt) and part01(.ipt). Typically I would place xxx01(.iam) into an upper level assembly, and get a BOM count of xxx01 QTY = 1. This works fine.
Now I have a similar component xxx02(.iam) that includes part02(.ipt) and part02(.ipt). With this component I use only half of the purchase component set in many instances. Therefore I would like to have the ability to place part02(.ipt) as a single part and have a BOM count of xxx02 QTY = 0.5.
The best solutions I have found is either to place xxx02(.iam) and manually override the BOM count to 0.5, which is error prone, and inevitably causes an issue each time.
Or I can set the Part Number of part02(.ipt) to be xxx02, and create a User Parameter in part02(.ipt) called BOM_QTY and set it to 0.5 ul and then set the Unit Quantity (using the BOM tab of the part file's Documents Settings) to use the User Parameter. The result of this is a BOM count of xxx02 QTY = 0.5ul.This method displays ul in the Parts List, which of course is an issue as well.
View 3 Replies
View Related
May 1, 2008
I am trying to edit a JPEG. It is one layer. My mode is Normal with 100% opacity, 100% fill. The layer is not locked.
I can use several tools including move, magic wand, paint bucket, crop. However, I cannot use the eraser, paintbrush, healing tool, clone stamp (which is the one I desperately need to use) or many others.
View 4 Replies
View Related
Jun 11, 2013
I would like to both flip and mirror (or pattern) a feature onto the opposite side of a rectangular extrusion.
For example (assuming a rectangular solid extruded in the Z dimension), I have two counter bored holes on the top surface of the solid aligned with the X axis and I would like a copy of those holes on the bottom surface but aligned with the Y axis. If I pattern the holes rotating them 90 degrees and then attempt to mirror them, I can only select all four or the two originals. Is there any way to disassociate the rotated copies from the originals while still retaining control over their dimensions from a single sketch?
View 3 Replies
View Related
Jul 6, 2012
i am using Autodesk Inventor 2012 to design a pipeline structure. I have a problem when mirroring a 3D sketch with applyed frames. the problem is that if after the mirror operation i edit the original sketch, the modifications are not inherited by the mirrored part of the structure. in particular when i mirror a 3D assembly and edit the original assembly the modifications are made also in the mirrored part but the program does it in a wrong way as long as the constraints are not satisfied and the position of the parts are not the same as the original assembly.
How to mirror an object and preserving the link between the original and the copy in order to make modifications to all the parts mirrored in an easy way?
View 1 Replies
View Related
May 17, 2013
I cut a curved profile using extrusion and mirrored it about the original plane. But It doesn't cut thoroughly ? there is still a surface of the rarer side of the part ?
the original extrude cut was "Through All".When do the same cut gving a distance...it mirrors perfectly..
View 2 Replies
View Related
May 18, 2011
Is it possible in inventor to make an assembly mirror array? I can't seem to make it keep from just copying the parts. It works OK for circular and rectangular patterns.
View 9 Replies
View Related
Jan 7, 2013
If I create circle and then mirror that cicle in the sketch. How can I then edit that mirror?
When I create pattern in sketch I can edit pattern afterward but cant figure how to edit mirror (except deleting constrains).
Is there way to do it?
View 2 Replies
View Related
Sep 3, 2013
This is a part from an inmported step file. The Inv assembly consists of 1047 part files.
I did the following:
Immediatley grounded all parts in the assembly.Opened the 8 (of the 1047) parts that came through as surfaces, all the rest are solid.
Found missing faces on all of them. I found the most useful tool was to create a series of section planes and do sketches with projected cut edges. Then export the sketches and open in autocad. This way I can see a simple line section view.
I set about replacing the missing faces to get the surface to a solid.After a few attempts I managed what you see below, a solid part in the browser. The part will now mirror as a new solid, but will not join. I have tried mirror as single solid, derive as single solid and combine. All Fail.
View 1 Replies
View Related
Sep 21, 2011
Is there an easy way to mirror a part? I drew this from a sample and need the opposite handing.
View 1 Replies
View Related
Jun 22, 2013
Inventor 2014 LT / have run into a problem in a throw-away project I"m working on.
A simple example is to create a piece of 3x5x.125 flat bar, add a sketch giving you a bend line and bend the end of it. Now try to mirror the whole thing giving you a 3x10x.125 flat bar bent on both ends.
FWIW: My project isn't this simple - I know I can just make the FB and bend both ends ... this is an example of mirroring a bend not working.
View 2 Replies
View Related
Oct 25, 2011
Am guessing inventor does not allow getting the constraints when you mirror a part..but is there a work around or easy way to copy the constraints.
View 9 Replies
View Related
Jul 17, 2013
I am attempting to modify a component that I already have. Part of the modifications I am attempting to do involves mirroring some of the part's features. However, when attempting to mirror the component I receive the error message attached to this post: "Select set contains object that cannot be patterned". I have been fooling around with this part and a few others and this appears to be an error message that comes up for mirroring or patterning (circular/rectangular) complex shaped parts. What specifically is the issue here and how can I bypass this error message?
View 8 Replies
View Related
May 15, 2013
Inventor doesn't allow me to mirror a part as a different part. In normal cases, I can mirror a part within an assembly and it allows me to give a new filename. Now, it thinks it is a standard part and wants to reuse it even if I uncheck the "reuse standard content and factory parts" box. How can I turn that off? Or mirror the component?
Software: Inventor Series 2011 SP1 x64
OS: Vista Business x64
CPU: E6400
RAM: 2*2Gb GeIL
VGA: Quadro FX 550
View 3 Replies
View Related
Dec 9, 2013
Ray tracing disables when I use the half section view, when I turn it on again it disables the section view. Is there any way I can see a cross section of my assembly in realistic mode with ray tracing?
View 3 Replies
View Related
Dec 7, 2012
Is there a way to get the mirrored hole to go all the way through both parts of the mirrored solid bodies.
I do realize that I can create the hole in a seperate feature, after the mirror. It will only let you select one 'solid' during the mirror command. Here is a simple .ipt to demonstrate the issue.
View 9 Replies
View Related
Nov 5, 2012
create a plane and mirror a solid?
I am planning to have the following workflow:
Plane creation:
Through the z-axis and at an angle of 7,5° to the XZ-Plane
Naming the plane - Mirror Plane
Turning off the plane visibility
Mirror solid:
Add mirrored solid to the existing solid
Here is a sample ao the code...
Dim oDoc As PartDocument
oDoc = ThisApplication.ActiveDocument
Dim oCol As ObjectCollection
oCol = ThisApplication.TransientObjects.CreateObjectCollection
'This does not work...
oCol.Add(oDoc.ComponentDefinition.SurfaceBodies(1))
'Here I want to create a new plane
Dim oPlane As WorkPlane
oPlane = oDoc.ComponentDefinition.WorkPlanes(1)
Dim oMirror As MirrorFeature
oMirror = oDoc.ComponentDefinition.Features.MirrorFeatures.Add(oCol, oPlane, False, kOptimizedCompute)
I have also attached a simplified part file where the code has been copied inti the iLogic browser
View 1 Replies
View Related
Jun 14, 2012
Whenever I am using mirror command in assly . The mirrored part do not get constraint again I have to use the constraint or I have to make that part grounded.
View 4 Replies
View Related
Mar 12, 2012
I have used the derive component command to mirror parts many times but each time in the past I have had a desire for that part to be linked to the one I mirrored. I have a new situation where I would like to mirror a skeleton part file that I used on one assembly to make a new assembly.
For example, I used the part attached below to create a stair frame for a steel framed platform I am working on. It consists of geometry, work features, and sketches that represent the nosing line, guardrail, stair stringers, etc.
I have another stair on the other side of the platform that needs to be a mirror image of this one plus a few unique modifications. The new assembly cannot be "linked" to the other one as each of these assemblies needs to be modified independently.
How can I mirror this part to reuse work I have already done without having to create a new skeleton file from scratch? Using the derived part method, then breaking the link makes all of my sketch entities unconstrained.
View 2 Replies
View Related
