AutoCAD Dynamic Blocks :: Angled Stretch And Flip Actions
Sep 18, 2013
I am working on a dynamic bi-fold door block. I have added actions that adjust the two leaves of the door to correspond to different opening widths and allow the jamb width to be adjusted. I am now trying to add flip actions in both directions. There is a regular swing door block in the drawing and I want the bi-fold door to have basically the same functionality as the swing door does.
I can't seem to get the angled stretch actions required for adjusting the opening width to work after flipping. I have tried including the stretch actions in the selection set for the flip but it does not seem to work.
View 3 Replies
ADVERTISEMENT
Jul 31, 2012
I'm trying combine a Move and Stretch Action such that the same handle MOVES the detail UP/DOWN and STRETCHes the detail RIGHT/LEFT while maintaining the base of the detail line at the reference line. Sounds confusing maybe but this is the most intuitive and elegant way to design it. However, I can't get it to work.
The attached detail achieves the same functionality but is a little clunky.
View 2 Replies
View Related
Dec 17, 2012
Please take a look at the attached dynamic block.
I have two flips in there, one verticle, one horizontal. For some reason, whenever I tell it to flip, and then select everything in the block, it doesn't flip the other flip's arrow.
Then, when I created the second arrow, and went back to include the first flip in the second flip's Action Selection Set, it doesn't pick it up. Doesn't matter if I do "modify selection set" or "new selection set"... doesn't matter if I select everything within (blue box) or everything that touches (green box).
Yet, when I highlight the icon box, it shows everything is selected.
Can flips not flip other flips?
Additionally, I want the rotation parameter to flip on the horizontal flip (so it stays outside the block), but I can't get that into the selection either.
What am I missing with these selection parameters?
View 5 Replies
View Related
Feb 4, 2011
I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.
I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.
But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.
View 9 Replies
View Related
Apr 4, 2012
Is there a way to have the grip stay in the correct position when the distance multiplier is .5? It seems to "get ahead" of the original location.
In the attached block, when I stretch the block with the grip, the grip ends up off the end point. Both actions have a .5 multiplier, with the left side having a rotation of 180 - so both sides stretch equally in opposite directions.
Also, there are 3 views with parameters (width/depth). Is there a way to get the user to enter in the sizes without having to select the size on each view? Basically a table that has a 'user input' field so the size selected changes everything at one time.
View 7 Replies
View Related
Jul 4, 2013
How do I stretch a hatch in dynamic block? It does not seem to work if I select the hatch along with other lines of a counter block.
View 2 Replies
View Related
Jan 27, 2009
I've built this nifty block for holdowns, but the attributes get all goofy on me when I use the flip command. The problem is that the justification of the attributes does not change when they are flipped - so if I modify the text in the attribute while the block is in the FLIPPED state, how to modify the justification?Check out the attached file to see what I'm talking about. The block instances are numbered so you can follow along:
1. block is inserted
2. attribute text is modified in NOT FLIPPED state - everything is dandy
3. block is flipped
4. attribute text is modified in FLIPPED state - text justification is jacked up
5. block is flipped again, in order to demonstrate the continued jacked-uppedness of the attribute
View 9 Replies
View Related
Jun 4, 2013
I have noticed in some dynamic blocks that have wipeouts in them, that they dor not stretch with dynamic actions.
In fact, they don't seem to be capable of stretching.
I have read some post about "Autodesk Sketchbook Designer for Autocad 2012" causing some conflicts.
Is there an advantage to having it installed?Do I need to uninstall it? or not?
Does it interfere with anything else in Dynamic Blocks or the drawing file?
AutoCAD 2012 / Inventor 2012
View 9 Replies
View Related
Feb 6, 2009
I have been trying to convert my offices blocks to dynamic blocks and this one is giving me a hassle.
Essentially we have a line with an arrow at the end of it to show drainage pathways. I added a multiline attribute so we can add the percentage along the line with a mask. The line, arrow and attribute all need to be able to be aligned perpendicular or tangent to a given line. Everything looks great until the arrow flips sides to work from the other direction and then the text is mirrored backwards.
Mirrtext is set to 0 and I even tried it while in the Beditor to see if there was independent. Multiline or Regular attribute have the same effect as well as if they are locked position or not.
I tried adding a flip, but then the mirrortext settings work just fine and the text won't flip back.
View 5 Replies
View Related
Nov 20, 2013
I've created a dynamic block with listed increments e.g. 36, 42, 48 inches width. The dynamic window block that comes with autocad has the same incremental stretch.
This block shows the tick marks as well as a the value in a dynamic input box. How can I have the value displayed in my custom dynamic block. All I have is the "tick" marks.
View 6 Replies
View Related
Oct 30, 2013
I have been working on a dynamic block that need to look like the attached jpg. Basically it needs to be able to stretch up to 50'-0" but in ten foot segments (part size limits) +/- an additional but in 1 foot increments.
I've got two blocks that will either array or stretch. But have not been able to get it to match the actual requirements. I have attached my current block attempt. Also as you can see from the jpg, the support posts usually alternate as well and I haven't figured that out yet either .
View 9 Replies
View Related
Nov 16, 2011
If you have a drawing open and the Tool Palette Architectural open click on the door. It has "tick marks" where you can stretch the doors opening to (24", 32"). I want to know how to add those "tick marks" to my blocks .
View 4 Replies
View Related
Mar 23, 2012
Attached is a block that I am using for Finish plans. Basically how it works is that it is suppose to be inserted and then stretched to indicate a finish change in the floor. When I insert it and stretch it, it works exactly as I want it, but when the scale is changed, the center tag resets to the original center before the block is stretched. I would like it to stay in the center relative to the line that is stretched.
Not sure if you understand, but if you are good with dynamic blocks. You will notice that the dot is annotative where as the line that stretchs is not. I cant have the line change because it will be stretched between two areas with different floor finishes and that will stay consistant. I want the block to adjust so that it is the same size on all the scales of the drawing.
View 9 Replies
View Related
Dec 12, 2013
I have drawn a simple block that I want to stretch in two directions manually or from the properties palatte.
My block works fine once and then breaks down. Stretch the block in the 'Y' direction. Deselect the block. Stretch the block again and only the grip moves. Edit the block and close the block, the block resets.
View 6 Replies
View Related
Nov 23, 2011
if it's possible to link a rotation with a stretching action. I have a text (or an attribute) inside a box that can be stretched. But if the box becomes too small to hold the text horizontally, I would like that the text automatically rotate vertically without any other action that stretching the box. If that is possible, is it also possible that instead of a text, there's an attribute, and that it rotates according to the attribute's length ?
View 9 Replies
View Related
Jul 5, 2013
See attached DWG. Two offset arrows.
This works as long as it is not rotated, but distorts if rotated and then stretched.
I'm using ACAD2006.
View 5 Replies
View Related
Jan 11, 2012
I created a dynamic block with a polar stretch. I insert the block, then have to select the grip to rotate/stretch it. Can it be inserted and then rotated/stretched all in one action? The insertion point is at one of the line and the polar stretch grip is at the other end.
View 3 Replies
View Related
May 9, 2013
I would like to stretch my extruded shelf using a list of value settings.
I completed the steps in block edit but it will only allow my object to move to my value sets.
In 2D I have no issue.
What am I missing when modifying 3D objects.
See attached blocks.
View 9 Replies
View Related
Sep 28, 2013
I have a linear stretch D1:
Distance Type: Increment
Dist Increment: 1
Dist Minimum: 1
Dist Maximum: unlimited
I also have a linear stretch D2:
Distance Type: Increment
Dist Increment: 1
Dist Minimum: 1
Dist Maximum: is it possible to set the maximum distance to equal D1-2.5??
Both linear stretch D1 and D2 can be stretched independently. So D1 may be stretched to 100, and D2 may be stretched to 50, but what I am trying to do is ensure that D2 will never stretch beyond the distance of D1.
View 1 Replies
View Related
May 22, 2013
I was wondering if it is possible to use dynamic blocks to stretch a rectangle evenly, using only 1 point? I have attached a PDF of a rectangle with 2 lines coming out of each side (before & after picture). I want to use dynamic blocks to pick a point at the top right of the block, so that when I pull it out, the lines will extend, but stay attached to the rectangle. I also what the rectangle to stay in the center at all times.
View 9 Replies
View Related
Jan 12, 2012
I have attached a drawing that I am trying to stretch two lines - one lengthen and one shorten as I rotate the connecting line.
View 4 Replies
View Related
Oct 18, 2012
See the dwg attached.
I'd like to modify a dynamic door block I've created so that I can stretch by door leaf size OR structural opening size, but I'm not sure how to do this.
Incidentally, I think the block has some flaws:
- I think the 'center/flip point' is not exactly in the center!
- The frame size should be 40mm, not 32mm
- The packing zone should be 30mm, not 6.38mm!
View 8 Replies
View Related
Jul 15, 2013
I foolishly thought i'd sorted making hatch work within a dynamic block that requires user input to set length and width of block...the hatch would fill to the revised size when the user sets the length and width in the properties dialogue...woohoo. Off I go home from work having defeated the nemesis of the day.
Open up my drawing today and can I get the hatch to act as it did yesterday?
I built my block (a simple rectangle all told) added my parameters in block editor. length and width linear actions with 0 grips as I don't want stretching by grips. Added the stretch actions. Tested the block (without hatch)...working. Only then did I hatch, so into block editor and using associative, send to back, normal island detection and selecting the rectangle to hatch. tested block ...working. great. Inserted the block into new drawing...working.
Opened AutoCAD today...Not working...hatch remaining as original size
Tried building new block exactly as I did yesterday...no joy...
On a side note...it works if I leave grips on but only if I use the grips to activate the hatch (it still doesn't work by just typing into properties though) that's not going to cut it as I don't want to be telling everyone to wiggle the grips so to speak.
View 7 Replies
View Related
Jul 28, 2011
I try create simple block where I change dimensions of polylines. Everything work with stretch partameter until I try use search parameter for change dimension.
View 4 Replies
View Related
Aug 12, 2013
I'm trying to create a block for angled handicapped parking stalls.
I used an array chained to a stretch in order to increase the number of stalls. It worked but for some reason it does not work in all of my visibility states. In some visibility states the array and stretch do not stretch together. The block should end with a stall but some end with a line and no stalls above it.
I attached a drawing with the blocks. The block named "STALLS-60-HANDI" it works correctly except in visibility state 9' and in "STALLS-60-4space Handi" it only works in visibility state 10'.
rename to dwg . fire wall would let dwg posting
View 4 Replies
View Related
Oct 4, 2013
I cleaned up my block and I am trying to use a field to reference a polyline for it's overall distance. The distance changes with my lookup action. After rotating and going back and forth from "On" - "Off" - "Both Off", then back to "On", the red polyline doesn't stretch back on it's original plane.
View 5 Replies
View Related
Dec 17, 2011
I would like to find a way to give a maximum and minimum length to a stretch (or move) but without absolute values.
simplified example of my block:
I have 2 squares, of which one big on, and a smaller one within the bigger one. I want to be able to stretch both squared indefinatly (no problem there), but the big square may never become smaller than the small one, and the small one may never become bigger than the big one...
In other words: the inside square should always stay inside the bigger one, no matter the size of the squares.
The problem with this block is that I have a hatch pattern between the squares, and as soon as i stretch the small square outside (or equal) to the big square... the hatch pattern 'crashes'.
View 2 Replies
View Related
Jul 31, 2012
I need this block to do the following:
1. Move the right piece so it ends at 3', 4', & 5'.
2. the move right hook and 'backing' to stretch/copy (or array) so it adds a hook to the right and fills in the backing.
so this means that a 3' gets 4 hooks, 4' gets 5 hooks and 5' gets 6 hooks.
3. the block as shown is the smallest configuration with 3 hooks.
I could just set up a visibility and draw each one at it's appropriate length but I'm trying to keep this simple block to a min size. If all else fails, that's the route I'll take.
I've tried a couple different configurations and I keep getting duplicates or the end piece doesn't move the correct distance.
View 3 Replies
View Related
Jul 13, 2013
I am trying to put a polar stretch on the block uploaded, but it doesn't seems to work (maybe because of my constraint? ). If something major is wrong with it, is there another way I can make the same drawing proportional when i rotate it and stretch it ? Also, after that I have to use it for vlisp.
View 5 Replies
View Related
May 6, 2013
I am trying to be able to have my outreach arm stretch horizontally and on angles of 5 / 10 / 15 degrees from the pole. I have been able to make the polar stretch for this and it works fine though what i am trying to do is have the luminaire height also stretch and move when the size of the outreach changes (i can make the linear dimension work the way i want though not the luminaire parameter) as when you add the paremter into the stretch action is only moves the top and leaves the bottom at the same location which is not giving me the correct height.
The block itself is alot more complicated then this I have stripped most of the parameters out to make it less confusing but the end result would allow the user to input the outreach angle, outreach length and luminaire height. I have attached drawing for your reference.
View 5 Replies
View Related
Jul 21, 2011
I am very new to dynamic blocks. I am starting off learning the small stuff before I get to the larger more complex blocks to convert to dynamic.
I have a reference block I am trying to "master" all the functions we would like to see.
I have two major concerns.
1) Why can't I rotate this block (via rotate action) and have the attributes stay at angle zero? I thought I built the parameters and actions correct.
2) I haven't ran across anything that explains how to stretch 2 linear parameters at the same time with the same distance (ex: stretch both at .25, .5, .75)
View 4 Replies
View Related
