AutoCAD Inventor :: Show File Path In Title Bar?
May 31, 2013Can IV be set up to show the file path to an open file in the IV window title bar (next to "Autodesk Inventor") like Autocad/MDT does?
View 1 Replies
ADVERTISEMENT
AutoCAD Inventor :: How To Get Scale To Show Up Properly In Title Block
Jun 13, 2008how do you get the scale to show up properly in the title block? I've been searching and finding nothing on this issue, with exception of Autodesk personnel telling users to use the scale display on the views. I know it's not the "Autodesk way" of doing things, but my company has been putting the main view scale in the title block for over 30 years.
I've been using Patrick de Stobbeleir's "iProperty Collection" utility since Inv11, and it does the job. The thing that bugs me, though, is that I can't figure out how to get the FirstViewScale:x custom properties to work intelligently in my title blocks. I just use the property FirstViewScale in my title block, which displays the scale of the first view put down...no matter what the sheet.
how I can use the FirstViewScale:x property in title blocks such that x is the sheet number? So far we just have the first sheet use the FirstViewScale, and then subsequent sheets use a prompted entry (I know it's an ugly work-around).
Photoshop :: How To See Document File Name With Full Path When Hovering Mouse Over Title Bar
Apr 1, 2013Using PS CS6, Windows 7 x64.
I was under the impression that when hovering my mouse over the document title bar, I would see a tooltip showing the full file name, including the path. This isn't happening and I'm wondering if there is a way to do this. I know I can click File > Save As, or Ctrl+Shift-S to see the full path, but hovering over the title bar would be easier. (What I am seeing now in the tool tip is the file name, % magnification and which layer I have selected. Basically, the tool tip is just showing what's in the title bar without hovering.)
Revit :: File Path Does Not Show On Project File
Jan 16, 2014I added a FILE PATH label on my titleblock but when I load it to my project file it does not show. Why it does not show, I added a new lable for CLIENT NAME it showed fine. Just to test it out I changed the lable of the second one to FILE PATH and the first one that I did to CLIENT NAME. When I loaded it to my project, the second label dissappeared and the first lable now shows.
View 1 Replies View RelatedAutoCad :: Link Title Of File To Title Block Inside
Jun 11, 2012I have a title block inside my drawing and i want to link my title on the title of the file itself, so that if the title of the file was change, it will be change also inside the drawing.
View 4 Replies View RelatedAutoCAD Inventor :: Use File Name Property In Title Block
Aug 15, 2013I want to use the File name property in my title block. But i don't want to see the .dwg extension.
Is it possible to not show the extension?
AutoCAD Inventor :: Set To Display Full File Path For Current File Open
Oct 3, 2012I was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: Update Idw Title Blocks From Template File With ILogic
Jun 6, 2013I am trying to create an iLogic (or VB) rule to update an active drawing title blocks from our Template File.I don't want to use any of the external software (Transfer Wizard etc), we just need a simple rule that will update the title blocks when we need to.
View 9 Replies View RelatedAutoCAD Inventor :: Updating Multiple IDW File Title Blocks Externally
Jan 18, 2012I am trying to update the text in the idw title block externally via excel or ilogic. I know of the iproperty of the part or the iam and that being able to be incorporated in the idw title block. But is there any way of linking an excel file to the idw so once the excel file is changed it updates all the idw title blocks it references?
View 2 Replies View RelatedAutoCAD Inventor :: How To Automatically Show The Tweak Lines Or Center Lines On Explode Path
Dec 16, 2011I know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013
AutoCAD Inventor :: Retaining Title Block Prompted Entries When Changing Title Blocks
Apr 26, 2013The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
AutoCAD Inventor :: Custom Title Block Properties Based On Project File?
Mar 21, 2013As I am creating drawings for parts/assemblies, I have to fill out the customers name and the job number which I currently do on every drawing I create by right clicking on the Drawing name in the tree, going to iProperties, and then filling out the fields I need.
I have to do this for every sheet. Sometimes over 100 sheets per job.
Is there a way, within the project file maybe, to have these fields be already filled in with the customers name and job number?
Every new project file I make is a new customer. So I'm wondering if there is someway to tweak the project file.
AutoCAD Inventor :: VBA Replace Title Block Definitions In Drawing From Template File
May 7, 2013I have some code to replace the current title block with a title block from a template file. I just don't like how it adds a new title block definition named "copy of titleblock". I'd like to delete or replace the current title block definition so only the newly added one is listed.
Sub test() Dim odrawdoc As DrawingDocument Set odrawdoc = ThisApplication.ActiveDocument If (odrawdoc.DocumentType <> kDrawingDocumentObject) Then Exit Sub Dim oTemplate As DrawingDocument Dim oSourceTitleBlockDef As TitleBlockDefinition Dim oNewTitleBlockDef As TitleBlockDefinition Dim oSheet As Sheet Set oTemplate = ThisApplication.Documents.Open(ThisApplication.FileOptions.TemplatesPath & "template.idw", False) Set oSourceTitleBlockDef = oTemplate.ActiveSheet.TitleBlock.Definition Set oNewTitleBlockDef = oSourceTitleBlockDef.CopyTo(odrawdoc) ' Iterate through the sheets. For Each oSheet In odrawdoc.Sheets oSheet.Activate oSheet.TitleBlock.Delete Call oSheet.AddTitleBlock(oNewTitleBlockDef) Next oTemplate.CloseEnd Sub
I'm just being picky at this point, but I don't want a buildup of title block definitions. We reuse drawings all the time which is why a simple method of updating a title block would be nice. I can just imagine in some years time after a title block update or two there are 20 "copy of copy of copy of .................. titleblock" listed in a drawing file.
AutoCAD 2013 :: Title Block Does Not Show Up When Plotting
Oct 25, 2012I made a 24 x 36 title block with attributes and saved it as a wblock.
1) When I inserted the title block into a 24 x 36 paper space, The titleblock does not fit. and the texts are messed up as well. The text are in in their respective places. What I did to create the title block is to basically created a title block border and then created the text. So, I made a block out of the borders and then a block out of the text then I made a block out of the whole thing (text and border). After i saved it as a wblock. When saving as wblock i chose entire drawing and once i chose object.
2) When I try to test plotting with this title block i made (even though it does not fit in) it does not show up in print preview.
How do I make some of the text Bold and others not? but keep them all same style?
AutoCAD 2013 :: Display The Full Path In The Title Error?
May 9, 2012I like to have the path display in the title bar at the top of the screen. I check the box to display it in options. It works! But the text is almost illegible in the title bar. The title bar is black, the text is black with some cloudy grey background. It is impossible to read. I can't seem to find anyplace to change it's appearance either.
View 4 Replies View RelatedAutoCAD Inventor :: File Path Length In BOM
Nov 27, 2013I have a problem with file path length BOM. I need to show in BOM only the last folder name, not the whole length of file location. At the moment i´m doing it manually and it takes lot of time to look and find each file location.
View 6 Replies View RelatedAutoCAD Inventor :: IBL File Location / Where To Set Path
Oct 10, 2012I have a standard install of Inventor 2012 SP2, but for some reason it cant seem to find the images for IBL effects. See attached Screen shot, when I go to select an item there is nothing there.
I have found the files in the "c:userspublicautodeskenviroments" folder but why Inventor cant see them?I have looked in "App options" in the "file" tab and in the project file and I cant see any pathing options that relate to the enviroments?
The default images for textures and bumpmaps are all found OK just not the IBL files? How I can set the path to these enviroment images?
AutoCAD Inventor :: Show File Name In A Form
Dec 13, 2011Why can't you show the file name on a form (without using iLogic to link it to a property)?
View 2 Replies View RelatedAutoCAD Inventor :: Get File Path Of Selected Item?
Apr 19, 2013I'm looking to get the file path of a selected part/assembly while inside of an assembly. I think I found something that can get it but the example is just different enough I can't figure it out and I don't have time to play with it. There also might be an easier way I couldn't find while searching.
This is the example code that seems to be able to do loads of things including get the full path, if you know what you're doing.
[URL]
AutoCAD Inventor :: IGS - An Unnamed File Contains Incorrect Path
Apr 11, 2012When i attempt to open an IGS file i get "an unnnamed files contains an incorrect path"
I thought it could have been a corrupted file but its not.Tried to create my own IGS file (successful) attempted to open that and failed.Downloaded an IGS file from Autodesk, failed as well.I was having issues opening other files but i updated the video drivers on my Dell M6600.
AutoCAD Inventor :: Path And File Name Not Showing Up On 2nd Sheet
Nov 29, 2011I created a text line in my idw template that asks for the filename and path as shown in the attach jpg. it works fine with the first idw but since we use multiple sheets in an idw (no vault here) the text line does not show up on the rest of the sheets. how can i get this to show up on every sheet in my idw?
View 1 Replies View RelatedAutoCAD Inventor :: LT - Path Does Not Pull In File From Database?
Feb 21, 2013Using Inventor LT - path does not pull in the file from database when using Inventor LT. Inventor LT does launch but file does not open.
View 3 Replies View RelatedAutoCAD Inventor :: Capture Portion Of File Path
Nov 2, 2012I need to capture a portion of a file path that is in the middle of the entire path.
For example
C:Vault WorkspaceEngineering810810-050000Model
I just want to capture the 810-050000 part. The portion before that may be different lengths, the Model portion will always be the same.
AutoCAD Inventor :: Unnamed File Contains Invalid Path?
Jul 11, 2006When working with an IAssembly I keep getting an error message that reads "an unnamed file contains an invalid path." I cannot seem to find a problem anywhere.
View 6 Replies View RelatedAutoCad :: Drawing Title Block - Show Original Date Created
Apr 11, 2012we have on company drawing title block the date created field. . . . but when the file is being transfered and "save" it shows the present day of saving. . . is there any lisp that when used, it will show the original date its created. .?
View 3 Replies View RelatedAutoCAD Inventor :: SLDASM-file Won't Show In 2013 Pro
Oct 25, 2012I'm having some trouble with importing SLDASM-file in Inventor 2013.
Inventor 2013 Pro tells me, that I could import PRT, SLDPRT, ASM, SLDASM-files.
But it doesn't appear in my project when I'm importing it.
[URL]
Verstelbare loodslab universeel 1 pans.SLDASM
AutoCAD Inventor :: Application Options - File Path Reversion
Jan 30, 2012After setting the Application Options-File tab paths to our company standard and manually restarting IV the paths all revert to "%PUBLIC DOCUMENTS % default paths. Our IT guy is having the hardest time tracking down the root cause, Both users are on stand alone licenses.
1. Where does IV pick up these default file paths? Can I modify that .xml manually as a workaround?
2. How to identify the folders to look for that don't have adequate red-write permissions?
AutoCAD Inventor :: ILogic - Pull Path And File Name Of Model From Within IDW
Feb 28, 2012How to pull the path & file name of an IPT from within an IDW?
If I use this line from within an IDW:
ModelName = IO.Path.GetFileName(ThisDrawing.ModelDocument.FullFileName)
it will simply return the file name of the corresponding IPT.
I want to be able return the path for the IPT from within the IDW as well.
Product Design Suite Ultimate 2012 64-bit - SP1
Windows 7 64-bit - SP1
AutoCAD Inventor :: PNG File Not In Correct Library Path - Cannot Check In DWG
Sep 17, 2013I have a "steelplt.png" file that Inventor tells me is not in the correct library path. The problem is that it is in the correct path as defined by the project file. I cannot check in dwg because the "steelplt.png is not in the correct library path".
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
AutoCAD Inventor :: Analyze / Show The References Inside An IPT File
Sep 26, 2011I cannot open anymore an IPT file (an error comes up). I know that the IPT file contains multiple references to other IAM´s and IPT´s via "Derived parts"; is there a tool to show all the references inside an IPT file?
View 9 Replies View RelatedAutoCAD Inventor :: Tube And Pipe Default File Path Structure
Oct 19, 2011How, or if it is possible to change the default file location for a tube and pipe run?
I know that you can browse out and modify the file path on your initial save but is there any way to change the default?
Example of what the default is: (assembly part number = 123456)
location for Tube and Pipe runs: C:ProjectsDesign Files123456123456AIPTube and Pipe
location for Run File: C:ProjectsDesign Files123456123456AIPTube and PipeRun01
example of what I would like the default pathing to be:
location for Tube and Pipe runs: C:ProjectsDesign Files123456
location for Run File: C:ProjectsDesign Files123456
basically I would like to remove the sub folders so all files are saved in one folder location.
My company is using inventor routed systems 2010.