Paint Shop Pro :: Error / Reference To Date / Time Being Incorrect
Aug 31, 2011
I am creating photo scenery for Flight Simulator X - my source files are large bmp's. From each of these I create a greyscale file which I Save As a tif file. However, when I recompile the bmp and tif together, I get error messages. Most common is a reference to Date/Time being incorrect.
If I load the tif file in GIMP, it reports "Incorrect Count for field DateTime (21, expecting 20); tag trimmed" - If I then save the tif in Gimp, it recompiles without errors.
View 2 Replies
ADVERTISEMENT
Mar 14, 2012
When I import photos and video using lightroom, I rename all my files based on date and time using a YYYYMMDD_HHMMSS format. For example:
This works perfectly for photos. That is, the (LR renamed) filename reflects the time the photos was taken (I suppose this is the "capture time"). However, the video time is totally wrong. For example, a video taken at 7PM gets renamed to something corresponding to 1AM.
I notice the following:
- Date/time based renaming of this particular iPhone 4S video works properly in other applications (e.g. Dropbox and PhotoMechanic)
- The resultant filename in LR4 appears to correlate to "Date Time Digitized", which in my case does not reflect when the video was actually taken (I'm not sure if it should or not, I'm only saying that it does not).
Is this expected behavior from LR4?
The behavior I'm seeing means that I have to use yet another application (e.g. PhotoMechanic or other) on the front-end of my workflow (before LR) in order to ensure video files are named "correctly". This is obviously not the desired solution, I'd prefer to do the renaming inside LR at the time of import since it provides a function for precisely this purpose.
View 12 Replies
View Related
Jan 29, 2013
Computer Asus G50VT, Processor Intel Duo T9400, 4 BG Ram, 2 x 500 GB HDD, Nvidia GeForce 9800M GS 512 MMB
I just move from Win VIsta Ult. to Win 8 Pro 64bit.I installed PSP x4. The installation went fine, but when I try to start the program I get the following error:
The application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more details.
I am missing Visual C++ runtime files, but I installed VC++ runtime files 2005, 2008 and 2010 both x64 and x86. Didn't work.
I also tried to install PSP x3, same error...
I ran sxstrace.exe but it means nothing to me. See the results below:
=================
Begin Activation Context Generation.
Input Parameter:
Flags = 0
ProcessorArchitecture = Wow32
CultureFallBacks = en-GB;en;en-US
ManifestPath = C:Program Files (x86)CorelCorel PaintShop Pro X4Corel PaintShop Pro.exe
[code]....
View 1 Replies
View Related
Jan 27, 2013
02/06/13 - This has been fixed in the latest update (15.2.0.12)
In no apparent pattern, MAP mode displays completely incorrect locations for my photos.
The same ones are mapped properly by Nikon View (attachment snap097).
One example is these coordinates:
Latitude:N 39d 12m 58.86s
Longitude:W 76d 31m 21.82s
Altitude:182.00m
Altitude Reference:Sea level
Which is right near the Frances Scott Key Bridge in Maryland, USA.
PSP displays it as somewhere off the west coast of Africa (attachment snap096)
View 3 Replies
View Related
Jul 10, 2011
I am trying to figure out how to remove the date/time stamp from my photos.
View 1 Replies
View Related
Jul 31, 2011
While working with some photos taken this summer, I noticed a strange issue where Organizer is sorting pictures by Date (using Date Created/Oldest) and showing a few pictures at the top under the correct date section (for example July 19th 2011), but then breaks to a new date section indicating July 28th 2011, in which the rest of the pictures in the folder are displaying - even though these pictures are still all from July 19th.
I've attached a link to a screenshot to make it clearer to understand: [URL]
I'm running X3 on Windows 7 Pro 64bit.
View 6 Replies
View Related
Jan 13, 2012
I need to assign the same creation date to several pictures. On the modify file format (batch process) window there is the possibility to include date but I cannot find a method to modify the date only.
View 2 Replies
View Related
Mar 25, 2013
I am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'.
View 8 Replies
View Related
Feb 7, 2014
I like to organize my photos by date. When I import my photos through lightroom 5, I specify in the metadata to organize by date, (in which it is listed correctly) and choose the destination folder. However, once I perform the import, it creates a completely separate folder under the year "2012". How can I fix this problem to import under the correct file dates?
View 1 Replies
View Related
Aug 13, 2011
I have a 5-6 year Gateway PC with PSP XI installed with Vista. I will be getting a new Gateway next week with WIN 7. I would like to D/L the trial version of PSP X3 to my present PC with Vista without removing PSP XI. Would this work? Would I have trouble removing PSP X3 when I an done testing?
View 5 Replies
View Related
Dec 12, 2013
I've been sent an AGS 3.1 file which I'm trying to import to Civil 3D using the Geotechnical module, but keep running up against an error which suggests the date format in the AGS file is incorrect. From what I can see the format should be DD/MM/YYYY, and this is correct in the file, but Geotechnics still won't recognise it.
Is there a different date format I should be using, or is there a way to force the tool to recognise the format in the file?
View 7 Replies
View Related
Aug 6, 2011
PSP taking eons to save a file. It goes into (Not Responding) mode. It is using about 10 to 15% CPU for a good 4 to 6 minutes before it all comes alive again likje nothing happened. THis is with small 50K pics and larger 600dpi images. All held locally. No disk whirring so it all seems to be a memory thing ! Vista Ultimate. Old machine but PSP has been running fine on this box for a while now (aside from startup times being slow). I've been editing larger files regularly with no issues before.
View 4 Replies
View Related
Sep 17, 2013
I purchased X5 Ultimate last spring and have been happy with the results. My only complaint is the extraordinarily long start up time. From clicking the icon to being able to use it takes about 2 minutes. The X5 outline or shell appears within 15-20 seconds and then there is a round blue circle spinning in the center of the work area for the remainder of the 2 minutes. Once initialization has completed X5 works very well for me.
I upgraded to X6 Ultimate and found it to be amazingly faster, which was my hope. 15-20 seconds and it is ready to use. This holds true for the 32 & 64 bit programs.
I would like to use X5 for the existing plugins that shipped with it. It is up to date with SP3.
Win 8 Pro 64 bit up to date.
16 GB ram
View 4 Replies
View Related
Sep 3, 2011
I have a new box version of PantShop Photo Pro X3. Using the CD to install, I am getting a 1935 error message.
View 8 Replies
View Related
Sep 8, 2012
I have Photoshop Elements 10.0, I use this software from version 6, but after installation of latest release (10) I have this problem:
when I use IMPORT FROM -> CAMERA MEMORY
I ever selected CREATE SUBFOLDER WITH DATE OF CAPTURE -> FORMAT aaaa mm gg
Now I have the same confguration but the program saves an incorrect date so it puts aaaa gg mm also if I selectd aaaa mm gg
The weird thing is that it renames correctly the single picture so aaaa mm gg is really aaaa gg mm
This is a very big problem because I must rename every single folder manually.
I think that this is a bug of the program (it happens now on a new pc and before on another pc).
View 3 Replies
View Related
Oct 9, 2012
Well I've got a problem when I work with layers, when I want to merge the layers, PSP closes everytime. If I register my work before merging the layers, it's ok.
View 4 Replies
View Related
Mar 4, 2012
I recently installed Corel paintshop pro x4 in my computer and when I go to open it, it takes a long time for it to open. My mouse keeps spinning. When I first installed it, everything worked fine. I added a couple of plug ins. Should I uninstall paintshop and re-install? If so, would I lose the plug-ins?
View 8 Replies
View Related
Nov 2, 2012
Let me give you the details, as they are fairly specific to this issue -
First, here's my puter info: Lenovo ThinkPad Edge E520, Intel i5-2410M Core proc @2.3Ghz, 4Gig RAM, Win 7 pro 64 bit.
PSP X5 - version 15.1.0.10.
Here's da scoop:
Open X5
Open jpg file (have tried various sizes, both physical and pixel, and makes no difference)
Add Raster layer
Create tiny color dot on new layer
Merge layers
Dies, freezes up, have to shut it down and lose what I just modified.
Now, mind you, I've been using PSP since way back in the Jasc days. For years I was one of their beta testers, because I USE THIS EVERY SINGLE DAY! Literally, I'm in it every day. I love X4, still trying to get into X5, but similar to when X4 came out, X5 is slowly PMO'ing me! I create hundreds of scripts, and lots dozens of plug-ins, and so far the majority seem to work fine in X5, however this whole issue of it crashing and freezing up my puter is really getting on my nerves.
After the crash, I can re-open X5 and it'll work fine on the first image. Then next image, SSSD!
Really is getting aggravating this constant crashing. Starting to think that Corel isn't creating this software but Microsoft is
View 3 Replies
View Related
Jul 18, 2013
I wanted to upgrade from paintshop pro x2 to x5 (want to go to 64 bit)but I have a severe problem. Here the steps to reproduce it:
1. open only one big tif file at a time (edit window) (from canon scanner 600 dpi A4 scan around 100 mb per file i think around 5500 to 3200 pixels)
2. sometimes i turn/rotate the picture first with the rotate tool (0 to 0,2 degrees)
3. use the crop/trim function to cut a small part of the edge
4. save the image and close it ( there is never more than one file opened in psp) its now around 80 mb in size dont close psp x5 and repeat steps 1 to 4 with other images. (with smaller 30mb images it did not happen and if I close x5 and reopen it after every 5th tif-image it does not happen too, so somewhere memory is not given free) When doing this when saving somewhere at the 7th - latest at the 10th image that image is saved corrupted.(it shows in the lower half vertical grey lines)
The big problem is: there is no error message and you only see that the image is corrupted when you view it again or if you see it in the thumbnail view of windows explorer.
second problem is that after doing an undo after a crop/trim step (3.) the picture is gone and the area is white.(dont save now!!)
x5 version is the current trial version (15.2 something - when i try to install sp2 it says its not necessary)
this happens on 2 different machines
mach 1: intel nuc i3217u 8GB ram, c drive 128 gb ssd, pic-drive: usb hd with 500 GB
mach 2: i7 2600k, 16 gb ram, cdrive 128 gb ssd, pic drivé: internal 2tb hd or internal ssd 256 gb (makes no difference)on both machines psp x5 system info only shows 4GB ram free so it seems its not really 64 bit programm.
View 4 Replies
View Related
Jan 6, 2013
I am running Win 7 64bit Pro with several users defined on a PC. PSP X4 runs OK for my user, but all other users cannot start PSP X4 they get a message Temp Directory not defined. The Temp Directory is defined and valid with write permissions.
Windows is installed on C: drive, but User directories are on E: Drive
PSP X4 version 14.3.0.3
I have reviewed a post for a similar issue, but this does not apply for my issue viewtopic.php?f=56&t=39832&p=208741&hilit=temp+directory+not+defined
I have even tried copying the corel hive of HKCUSoftwareCorel from my user and "DocumentsCorel Paintshop Pro" directory to the other user, but still get the temp directory is not defined message
So basically although PSP X4 is running for one user on the PC, none of the other users can start it to run for the first time
View 1 Replies
View Related
Mar 7, 2013
Every time I launch Paint Shop Pro X5 my recent file list is empty. I thought the program was supposed to remember the last four images that were opened. I then have to select File > Open but now the program defaults to a folder called My Pictures. I store my images in my own folder elsewhere. I would like to set my folder to be the default folder. I have to navigate to my folder ever time I launch the tool. If I go to File > Preferences, I do not see a place where I can change the setting.
View 4 Replies
View Related
Dec 22, 2013
New to PSP and I took some night time photos of a car using long exposure, the pictures are clear and focused but they have that yellow-orange street light tint to them. Is there an easy way in PSP X6 to get rid of that color cast?
I'm shooting in RAW in Large with a Nikon D5100 if that matters for this. I'm not bothered how I output it as up to now I've just experimented on screen. No error codes yet!
View 4 Replies
View Related
Jun 29, 2011
I'm trying to scan a picture using a LEXMARK Platinum Pro905 all-in-one printer with PSP X3 (v. 13.2.1.20). Lexmarx drivers are the latest available.
Please note I'm using a French version of PSP so I'll try to translate the titles, menus and messages in English. I'm going in File > Import > From a scanner or a camera (3rd option)
A pop-up windows is opening with settings for scanning. I'm able to modify every option if I want to. If I click on "Preview" (with a document in the scanner), I'm getting a preview of the document. Using the preview, I can select the area of the document I want to scan. So far so good.
When I click on the "Scan" button, the pop-up with the scan setting is disappearing (which is probably normal) but a pop-up error message is displayed right away :
The French says "Une erreur s'est produite lors de la lecture du fichier".
In English, it would probably translate by "An error occurred while reading the file". The only choice I have is to click "Ok".
I also tried with another scanner (HP Scanjet Q4010) with same result. Both (Lexmark + HP) are using an USB connection. In the past (few months ago), I was able to scan a document using this method with my HP scanner and PSP X2.
View 7 Replies
View Related
May 29, 2011
I installed PSP X3 trial version to see if I actually wanted to buy it, but after installing it, I keep getting Not Responding when I try to open the program.I am running out of time on my trial time.
PS: I have the same problem with XI, so I reverted back to Jasc PSP9.
View 7 Replies
View Related
Nov 29, 2011
repeat error each and every time I use any adjustment on graphics, photos or anything I am working on with PSP X3. Am including a screen shot, edited down to the forum specifics, and I had to edit the screen capture with PSP X2 since to reload PSP X3 will now require my restarting my computer.
I have used Paint Shop Pro since it's very first incarnation as a tiny program courtesy of the folks with Jasc, so this is not my first time using the product, just the absolute worst experience doing so.
No matter what the image, file type, or set-up, when I try to make adjustments (even if I make sure to stop and make double sure they are finished processing), eventually the program locks up and I get the error shown and stated.
View 3 Replies
View Related
Sep 10, 2012
It's been a few days now that when I try to save a picture (either with "save", "Save as", or "save copy"), I get the following message popping up:
"because of the limitations of the specified file format (and possibly the save options you've selected), the saved file will be limited to a merged image. Would you like to continue?"
I have hit ok to that and the software would save the picture, but when I checked the size of each picture I noticed a dramatic drop in size (from 6.5MB to roughly 1.3MB). Just for the record, the editing I did to these pictures was minimal, just a little rotation and a removal of maybe 2mm from each size.
First of all, is it normal to get this message?
And then, is such a drop in size normal?
it's pictures in JPEG taken from the camera and saved as JPEG.
View 3 Replies
View Related
Jul 20, 2010
I cannot seem to get the Help menu item to work at all. Every time I select Help -> Help Topics... I get a dialog box with the following error message: Web Works Help display fail! I've reinstalled PSP twice. And I downloaded the latest update.
View 13 Replies
View Related
Mar 5, 2013
I purchased PSP X4 Ultimate, a little over a year ago, and recently purchased a new computer. (I had purchased the software through the corel.com website digital download, so I downloaded the files directly from their site.) After installing it on my new computer I started getting the Authenticity can not be Verified Error.
View 3 Replies
View Related
Dec 19, 2011
I made some changes to a photo and when I went to save the changed photo(save as) in JPG format I get an error writing file to drive, no explanation and it wiped out my original photo on the drive.
View 2 Replies
View Related
Jan 29, 2012
Image with resolution larger than monitor size, view in PSP set to 1:1...Ctrl+Shft+A for full screen view.
PSP switches to full-screen with move (hand) tool present for moving around the image. However, when the move tool is used it behaves like the Esc key and defaults back to preview view within PSP.
View 1 Replies
View Related
Jul 10, 2012
My PSP X3 locked up and I had to use the Task Manager to close it due to "not responding." This has repeated each time I have tried to load the program, including trying the suggestion of pressing "Shift" and trying to launch the program on a reset. There's no error message, it doesn't get that far. The welcome screen loads, shows the program is updating the cache, etc. but then it goes to no response, no error message, just 100% locked up. Have to use the Task Manage every single time to get it to close.
Right before this happened yesterday, I also experienced difficulty copy and pasting one image or selection into another. No paste commands would appear. I tried doing the "clear" selection as posted online, but no real answer on that either.
short of uninstalling and going through all that crap again. I'd buy the latest version, but since I've had no end of problems with this version I am hesitant to move forward if there are more bugs.
View 5 Replies
View Related
