AutoCAD .NET :: Best Way To Draw Solid In 3D Space?
Dec 19, 2011what is the best way to draw one solid in 3d space?
I need draw 3D object in different position, different coordinate and different inclinations.
what is the best way to draw one solid in 3d space?
I need draw 3D object in different position, different coordinate and different inclinations.
I'm trying to draw a solid button that has a 9mm diameter and a 1mm thickness with a dome shape on top to look like a real button.
The dome measures 0.2500mm high from the top of the button.
I'm trying to draw a solid object. I have the top and bottom base, and all I want is to loft that thing, but when I do, it only lofts the limits - it results in a hollow object.
View 7 Replies View RelatedI'm trying to draw dimensions in paper space but:
It's not possible to work with annotation dimensions on paper space?
Using the traditional way and neither. Because AutoCAD 2010?
I drew a dashed line in model space and it appears as a solid line in paper space. What is going on?
View 4 Replies View RelatedI am in need of creating a solid drawing from my wireframe drawing in model space. I have never done any 3d modeling in autocad before it took me a few days just to get the wireframe of a staircase done! I have tried to render this object in viewport but it disappears after I click on it or move around, therefore I cannot see it in my paper layout. How do I make a rendered object stay? Also I want to plot this on 22x34in and 11x17in paper, how would I go about getting a high quality rendered image. I am using autocad 2010.
View 4 Replies View RelatedBasically I have drawn some lines, arcs and splines in the 3D space, then I created surfaces between these lines, arcs and splines, thus I created an 'object' which is defined by all these surfaces.
And what I want to do now is to fill up the empty space and basically convert it into a 3D solid object.
Another example would be a loft 'object', and it creates only a surface, so may I somehow fill up the empty space and turn it into an object?
Drawing2.dwg
I have drawn a site plan in model space at 1to1 scale. I try to draw hidden lines to show demolition. In paper space the scale is set to 1"=50" to fit on paper. But all the hidden lines plot solid. I had changed LTSCALE, PSLTSCALE, to 1. This problem keeps happening in most every thing I draw.
View 8 Replies View RelatedI am trying to use the line shape tool. However, the shape stroke type affects the arrows. Does it mean that I have to draw the line first, without the arrows, and then add the solid arrows to the line
View 3 Replies View RelatedWhich tool would be used to draw a small pyramid and fill with a solid color?
How could I rotate this pyramid 45 degrees?
We have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedHow can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedIs there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies View RelatedI am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies View RelatedI want to subtract smaller solid from bigger solid.I can not understand how to move smaller solid and place it in front of bigger solid.
View 6 Replies View RelatedHow can i convert some solid bodies to a single solid.
View 8 Replies View RelatedIn 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View Relatedafter discovering zones and the space evaluation tool I wonder whether it is possible to customise the XLS output further by also reading out information from a property set attached to the space?
The office standard is to have a property set attached to each space that defines a room number (which is the level ID plus a number, say G-01), the area and the space name.
We used to simply schedule the areas with a schedule table. That only gives us net rooms, no subtotals per department (or say per flat) and no grandtotal.So we got as far as using zones grouping the spaces in each flat.
Now I need an area schedule XLT template that also displays the room number from the space's property set and the schedule grouped in a fashion that I get subtotals per flat (=my zones) in another column and a grandtotal.Playing with the Space evaluation tool I seem to only ever get Room/ zone names and their areas.
I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View RelatedI feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies View RelatedIm working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies View Related