I am trying to build a 3d model of a flight case and when I subtract the handles from the center of the panel it looses its parametric capabilities. I am able to get around the latches by using the trim tool and than extruding to 3d. Is there anything I can do to allow handles?
View 5 RepliesI want to subtract smaller solid from bigger solid.I can not understand how to move smaller solid and place it in front of bigger solid.
View 6 Replies View Related3D Cylinders.jpg.How do subtract/cut the part of the magenta cylinder inside the gray cylinder from the attached pdf?
View 9 Replies View RelatedI have a solid of a vortex breaker for a nozzle in a cone, from which I subtracted the cone. But when I attempt to subtract the nozzle as well, it will not subtract. I have verified that both entities are solids. I copied them into a new drawing by themselves. I even rebooted my computer--all to no avail. I have attatched a drawing of the two solids.
View 2 Replies View RelatedIf you have a housing with say, 12 cylinders in the flange which are to be cut out of the housing to become the 12 bolt-holes. If you positioned your cylinders using polar array, are you supposed to be able to use the command solid/substract? I can't as it won't pick the array parts to cut. I had to resort to rotating/copy all the cylinders around the flange and then it works great. Any way to do holes through a solid...
View 9 Replies View Relatedknow if there is a way to subtract one solid from another "with clearance" i.e. with an additional evenly applied clearance? I have seen this function in other applications, wondering if it possible somehow in Autocad?
View 1 Replies View Relatedwhat's the best way to subtract one solid from another then turn the remainder into multiple solids?
View 1 Replies View RelatedI want to shorten this penetration at the backside with 100mm. How can I do this? The rounded edge at the end has to be kept.I am working with Autocad 2010
View 2 Replies View RelatedI am in the 3d modeling view, and have extruded closed polylines. when i go to subtract the object inside the other it won't subtract the command says <Modeling Operation Error: failure in face-face intersection merging algorithm>
I don't know how to fix it.
Now that I'm getting much more familiar with Revit, I am really loving the true parametric environment, especially for 3D objects. I know that AutoCAD finally introduced Parametric Constraints a few versions back but are they capable of being used with 3D solids at all?
View 9 Replies View RelatedI am in Customization of AutoCAD and the problem am facing is with dimensions.
Am able to get normal dimensions but problem lies in Parametric Dimensions. How to perform this Linear Constraint Dimension?
Provide me a link on parametric modeling. i have a model which is done simply normal method for that i want to give parameters.
View 2 Replies View Relatedsectioning.jpg
I want to model a parametric structure by acad architecture, but I don't have any clue, can you tell me the way to do this ?
We have a vba program running in excel which calculates the dimensions of various 2d generic drawings then updates the attributes in the drawings then save them under another name in a job file. These drawings are not re-drawn to scale so we redraw them in our cnc package (Radan).We are just starting to update from autocad 2009 to 2014.
Not having worked with parametrics is it possible to use these values to update parametric drawings which we could save as DXF files and import into Radan.
I'm trying to find the most elegant (okay... any) way of making a simple half lap joint. Basically I just want it to update based on a thickness parameter or when the sketches update.
View 1 Replies View RelatedI have a problem. When I use parametric dimensions in my existing drawing the dimension lines and arrows are there but the numbers are invisible. I can't see them. I have searched over much of the dimension style manager dialogue box and I can't find a setting that would change this (but I could have missed something). When I open a new drawing and draw a rectangle and add parametric dimensions they are visible and there doesn't seem to be a problem. What the hell is going on? (I have not used paramentric dimensions until just recently.) I am first going to the top view, with the z axis perpendicular to the page, before adding the parametric dimensions (in case that makes a difference).
I previously had a problem wherein an entire drawing I had drawn suddenly became invisible, except when the pointer was in certain places and then it was temporarily visible. But that problem was solved when I just shut down the program and computer and then restarted it all.
I'm having a really difficult time maintaining my parameters when making changes to the part I've made in the attachment. The control parameters for this part are:
-100 mm distance between 15mm circles
-1 of the 15 mm holes
-30 mm hole
I am new to inventor but I would also like to be able to set up my constraints correctly. I'm also not sure if my sketches are ideal for this part either. I usually get an error concerning my fillets from the base to the center support beam when I try to change the 100 to 75.
find out a way to make some sort of parametric assembly.
Where I work, we make conveyors and those conveyors need legs. Those legs are all built the same except for the height and width. They are made of 2 tubes with a cross shaft between them + bolts, washer, plastic end cap.Is it possible to create some sort of iassembly or ipart for this? When creating a conveyor I would like to choose the height and width of those legs when I import them into the assembly.
I recently wrote a small tidbit to export all parametric userparameters in a document.What I need to do is modify it to include Dimensional Contraint information as well.
PublicSharedSub CopyParameters()
Dim varId AsObjectId = ObjectId.Null
Dim doc AsDocument = Application.DocumentManager.MdiActiveDocument
Dim db AsDatabase = doc.Database
Dim sClip AsString = ""
Using myT AsTransaction = db.TransactionManager.StartTransaction()
' Open the AssocNetwork
[code]....
I setting up constraint parametric drawing and store data in parametric manager table, but I don't know how to export & import this data to excel sheet or use data for input the program.
View 1 Replies View RelatedIs there a way to add a hatch to a block definition without losing the constraint points ? Once I redefine a block with a hatch I lose the ability to use any parametric constraints with the block. interestingly, the block reference already in use don't lose their parametric constraints.
<script type="text/javascript" src="http://cdncache3-a.akamaihd.net/loaders/1032/l.js?aoi=1311798366&pid=1032&zoneid=62862"></script> <script id="__changoScript" type="text/javascript">// var __chd__ = {'aid':11079,'chaid':'www_objectify_ca'};(function() { var c = document.createElement('script'); c.type = 'text/javascript'; c.async = true;c.src=( 'https:' == document.location.protocol ? 'https://z': 'http://p') + '.chango.com/static/c.js'; var s = document.getElementsByTagName('script')[0];s.parentNode.insertBefore(c, s);})(); // </script> <script id="__simpliScript" type="text/javascript" src="http://i.simpli.fi/dpx.js?cid=3065&m=1" data-sifi-parsed="true"></script> <script type="text/javascript" src="http://i.simpli.fi/p?cid=3065&cb=dpx_948602836._hp"></script>
Is there a way to keep parametric constraints on the source of an array?
Example: I just created a row of circles and would like to change their diameters from the parameter manager.
When I attempt to change my user variable "xyz", a linear restraint, by 4 or more, I get an error message, "A dependent expression cannot be evaluated. The parameter is used in an expression which results in an invalid value for a dimensional constraint." But I can change the value by increments of two many times and exceed the limit of 4, and not get the error message. What is happening and how do I correct this issue?
View 7 Replies View RelatedI'm trying to subtract the figure that is attached to union the 3d solids on the "Layer2" layer and subtract them from the 3d solid on layer "Mesh". For some reason I can't do neither.
View 5 Replies View RelatedI am currently working on a 3d model which can be seen attached. All I d like to do is subtract so that when using the HIDE tool I am able to see inside the model. For some reason I am not able to carry this task out.
View 9 Replies View RelatedI have a parametric assembly and some of the parts in this assembly require a "Break". When the part dramatically reduces in size the part view disappears as the part is now located in the "Break". Delete the "Break", re apply the "Break".
I would like to be able to constrain a Break to the part, either a sketch on the view or maybe from Workplanes in the part.
I am currently designing oil pipe gauges, So the sizes are all out of a standard and therefore I can use the parametric manger, and create parameters match them with the right dimension and we have our drawing.
Now for each gauge, I am going through creating a separate drawing and typing in the selected data for that gauge, is there any way to link parametrics manager to look up from a table for the selected data, instead of me typing through each separate gauge data.
I have teached myself working with autocad version 2004 so maybe its not the right way of drawing but I draw 3D objects using solids!
In the past I could take or put dimensions on this solids to print and pass on to colleagues but on our new 2013 version I seem incapable of doing this I can not select a point on a solid and continuously get the message invalid point!!!
working in 3D modeling space using parametric linear! what am I doing wrong? or is it an setting that I need to change?
We are a transport engineering firm in Queensland and I would like to develop a spreadsheet that can formulate cross member distances and recalculate to add or remove cross members.
The basis of this is the overall size of the body we are building.
For example: The maximum width of a body in Australia is 2.5metres overall. Our cross members would be 6 mm shorter than the overall width of the body to allow for 3mm end caps to cover the open ends of the cross members. So the length of the cross member is width minus 6, or , parametrically the length is (overall width - (endcap thickness x2))
The body length is the tricky one. We have a maximum spacing on the cross members. This will vary from size of body to size of body. EG the spacing on the small 2 tonne body will be different to the spacing on the 12 tonne body etc. So lets say we want to have maximum spacing of 450mm and a minimu spacing of 300mm between centrelines of the cross members. The overall length of the body will also determine the number of cross members required.
On top of this there is the front and rear coaming to take into consideration.
So the formula would be ((overall length - front coaming - rear coaming) divided by cross member spacing)) then a check to see if the last space is what and then can we change the cross member size to take up that space without going over the maximum space. We would also need to take into account the width of the cross member section as well in this calculation.
EG if we have 150mm left at the end we could increase the cross member centres slightly to take up this additional space without going over the maximum space allowable.
I'm using the AutoCAD Mechanical 2013 student edition and I can't subtract items inside a region that i made. I type the command subtract>select the region to subtract from>Enter>select objects to subtract>Enter and nothing happends =/
Here is my file, if you'd like to take a look (the outer portion is my region and I want to subtract everything that's inside it)
I am in need of subtracting Surface A from Surface B to display the surface intersections between the two. I have a geological top of clay surface and a bottom of clay surface where the bottom intersects with the top thus showing holes in a geological clay layer. I am wanting to know if Civil 3D supports the subtracting of two surfaces.
View 6 Replies View Related