AutoCAD 2013 :: Parametric Lookup / Creating Separate Drawing
Sep 6, 2012
I am currently designing oil pipe gauges, So the sizes are all out of a standard and therefore I can use the parametric manger, and create parameters match them with the right dimension and we have our drawing.
Now for each gauge, I am going through creating a separate drawing and typing in the selected data for that gauge, is there any way to link parametrics manager to look up from a table for the selected data, instead of me typing through each separate gauge data.
View 2 Replies
ADVERTISEMENT
Feb 22, 2013
working with acad 2012 and not having good luck with links and functionality with excel. tried the links manager,pasting excel/entities. trying to insert separate files in model space in essence creating multiple cut lists for the drawing. Is there a tutorial that goes in depth with this? just froze one file at work, lucked out and opened at home. Each cut list is an individual worksheet, which may be the problem.
View 1 Replies
View Related
Apr 24, 2013
I have created a parametric, multibody master part file to derive parts from it, and then put them in an assembly. See attached file. Now, I need 3 different versions of this setup (with different values of the parameter 'bending_angle').
What is the best way to do it? If I derive parts from it, they always follow the *actual* status of their master file. Is there some method to do this: "derive from this file, with parameter bending_angle=55deg", but keep the dependency relation, i.e. if I modify something on the master file, the derived part fill follow the modifications (with the value of bending_angle=55deg)
Inventor 2013
View 3 Replies
View Related
Dec 23, 2013
I have a problem. When I use parametric dimensions in my existing drawing the dimension lines and arrows are there but the numbers are invisible. I can't see them. I have searched over much of the dimension style manager dialogue box and I can't find a setting that would change this (but I could have missed something). When I open a new drawing and draw a rectangle and add parametric dimensions they are visible and there doesn't seem to be a problem. What the hell is going on? (I have not used paramentric dimensions until just recently.) I am first going to the top view, with the z axis perpendicular to the page, before adding the parametric dimensions (in case that makes a difference).
I previously had a problem wherein an entire drawing I had drawn suddenly became invisible, except when the pointer was in certain places and then it was temporarily visible. But that problem was solved when I just shut down the program and computer and then restarted it all.
View 9 Replies
View Related
Dec 19, 2012
We currently have a bunch of Lisp programs to create drawings but I am interested in exploring how I can maybe use Lisp with either dynamic blocks or parametric drawings. I just don't know which would make more sense. Currently we have programs where we enter things like width, height, leg or radius, bars wide and high etc and it creates a drawing like the one I've attached. I know that if I can create this drawing as a dynamic block or a parametric drawing, then when there are revisions, I don't need to create the drawing again. I can just adjust the parameter or the dynamic block. What makes the most sense, a dynamic block or a parametric drawing? I should note that I'd still like to use autolisp to create the initial drawing (or insert the block) since that's what the users are used to.
View 9 Replies
View Related
Nov 15, 2012
I have teached myself working with autocad version 2004 so maybe its not the right way of drawing but I draw 3D objects using solids!
In the past I could take or put dimensions on this solids to print and pass on to colleagues but on our new 2013 version I seem incapable of doing this I can not select a point on a solid and continuously get the message invalid point!!!
working in 3D modeling space using parametric linear! what am I doing wrong? or is it an setting that I need to change?
View 2 Replies
View Related
Dec 10, 2013
Eventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
View 5 Replies
View Related
Dec 9, 2012
I'm thinking of creating separate corridors for my stripping calculations and then using the stripping datum surface as my main EG surface for a more accurate Cut/Fill quantity. In this instance I have 10 corridors for my primary roads, and adding another 10 corridors for the stripping seems like a lot of effort, but it's probably necessary.
View 8 Replies
View Related
Feb 1, 2013
Normally you can do this with hatchedit -> options -> create separate hatches.
also "HPSEPARATE" on the command.
How can I separate the already drawn hatches in a drawing with vba?
I can't find such a method.
View 2 Replies
View Related
Nov 30, 2012
I have 10 separate drawing files that I want to combine into one drawing and I want each drawing to be on a separate layout.I want to end up with one drawing with 10 layout tabs each containing the graphics from one drawing.Each drawing has one layout with the graphics on it.No fancy paper space / model space stuff.No viewport scaling.
I thought this could be done via Design Center but I've never used that.
View 6 Replies
View Related
Apr 2, 2013
I get the following message when I try to access it from the menu.
"EditInSSA cannot be used because the optional feature is not installed on this machine"
When I look to modify a deployment I cannot find the option to add SSA.
View 4 Replies
View Related
Nov 22, 2012
I want to create cross sections in a blank drawing via a Data shortcut Project.
My intent is to keep my file size to a minimum. I can include surface, alignment and profile per data shortcut but not my corridor. My corridor is 3000 feet long and when I do cross sections in the same drawing, it runs real slow.
View 6 Replies
View Related
Feb 25, 2013
just got new computer with 2013acade on windows 7 os. is express tools still a separate install?
View 2 Replies
View Related
Apr 12, 2012
I have a corridor drawing with my corridor and have sample lines ever 25 feet. I would like to generate my sections in a seperate drawing. Is this possible?
(I am trying to keep different pieces to my project in different drawings.)
View 2 Replies
View Related
Mar 7, 2012
I have an assembly that is identical to another assembly with the exception of 2 or 3 components. I want to create 2 different configurations of the assembly, e.g. 12345-009 for the original assy and 12345-019 for the similar assy that has a couple of different components and/or additional components. I can create the -009 assembly and then do a "Save As" for the -019 assy and do a "Component/Replace" and add (or delete) other components.
I want both of these assemblies to be on the same drawing with a base number of 12345. I know I can do this and create a separate parts list (BOM) for each configuration and put it on the drawing. Is there a way to "merge" the two PLs so that there is a quantity column for each configuration (-009 and -019)? For example, if the same gear is used in both assemblies, I want a quantity of 1 in each column. If a component is used in one but not the other, i want only the quantity to show up in the appropriate configuration column.
I am using Inventor 2011.
View 1 Replies
View Related
Apr 3, 2012
How to automatically print the layers of a drawing in separate sheets in one go?
I wanted to print the layers of a particular drawing each in separate sheet but wondering if there might be an automated way to do so. For example, if I a particular drawing comprise 15 layers then how to print each one of these layers in a separate sheet.
Sure, there might be more than one way to achieve this (like controlling the “plot” feature on the “layer properties manager” but what I’m looking for is an automated way to print all the 15 layers separately in one go.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
Mar 9, 2014
I have created a short (<3 seconds) video comprised of 2 layers. Each layer was filmed as a green screen, and I used Keylight in After Effects CC to create a transparent background. My ultimate objective is to use the clip to create a transition for use in ProShow Producer, as described in the link [URL]..... To do this, I need the main video file, and a second file containing only the alpha channel.
I have used Adobe Media Encoder to output a FLV, and told it to Encode Alpha Channel, as was suggested, but I only get the one file (the main video). How do I get the alpha file?
I am using AE CC.
View 1 Replies
View Related
Jul 10, 2012
I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies
View Related
Jul 12, 2013
I accidentally inked some of my drawing onto the template layer and i can't seem to separate the paths from the complete drawing/template - any clues on how to shift these paths to the correct layer? It was a very detailed piece of tracing
I didn't think one could ink on a template layer!!!
View 5 Replies
View Related
Jun 20, 2011
Ok over the past few weeks I've got pretty much most of the Dynamic Block stuff down except this feature.
I've attached a drawing. In the middle I used VISIBILITY to have all the different weld types. I need something at the end to where Weld Tails can be added if they're needed but you can only use one Visibility per block. I'm also going to need something at the front of the block for different symbols like "Field Weld" and "All Available". If I can figure the Tails out then I can do the other one.
View 0 Replies
View Related
Feb 22, 2012
I am currently working in AutoCAD 2012 and have been creating dynamic blocks for a while now.What i am running into is this: When i create a Look up Parameter and add all of the necessary parameters (flip1, flip2, visibility and distance) to the block, it acts as it should. However, when i select the LH or the RH look up state the check mark defaults back to the "Default" state. If the "LH (Reversed)" or the "RH (Reversed)" state is selected, the check mark will stay on the selected state.
In AutoCAD 2009 i know that if you set the "Custom" look up state (found at the bottom of the look up window) to the first listed state, it will correct this issue. But in 2012 this is not the case.
View 0 Replies
View Related
Oct 22, 2012
I have created a dynamic block and have applied some lookup tables to it but its not working just the way I want it. I think its to do with the custom entry on the lookup tables. If I delete the custom entry when i select the block in model space the drop down select box to allow me choose a selection is no longer available. How can I remove the custom entry and still have the block working normally. I've attached the block.
View 9 Replies
View Related
Jun 3, 2013
I have been looking for about three days on how to do the array with-in the dynamic blocks, but have been very unsuccessful. What I am trying to do is make a TJI joist that you can have a look up table that is classified as 'offset' so that you can eventually strech the joists to standard spacing, and use the array to work. So that I dont have to have a ton / zero visibiliy states.
View 1 Replies
View Related
Nov 25, 2013
So, I'm familiar with creating Property Set data and schedule styles and all, but I am having trouble wrapping my brain around the following, I would love to know how you tackled it in the simplest way possible:
I need to show a schedule for Windows and Doors, that will read the drawing or selection, and list all the door and window types. Now, that is not so bad, but there is a caveat that I can't get past.
We offer two or more Manufacturers for said windows and doors and are being asked to show tags on our floor plans that reference a table that says:
"For window type "1", ship either Manufacturer A - Part No. X, or Manufacturer B - Part No. Y
What I can't wrap my brain around right now is how to get Property Set data to know that "1" means both of those parts, and not one or the other. The way this is supposed to work, is for each of our plans we are to have only the types ("1", "2", etc.) that are currently shown on that plan, and if one of those windows or doors change to a different type, have the schedule update automatically.
I would prefer not to need to write a LISP or Vlisp that does this, but am open to using VBscript in the Property Set Data, I am just unsure of how to write that into a Formula.
View 4 Replies
View Related
Jul 28, 2011
I found this block online. I'm trying to do something similiar. I want the attribute to be dynamic (in context). The author of this block set a visibility and then 92) lookup actions, but only (1) lookup parameter.
SectionSample.dwg
View 4 Replies
View Related
Feb 25, 2011
I have developed a handout for my students and graduates I thought I would share here:
[URL]
View 8 Replies
View Related
Nov 28, 2012
Recently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies
View Related
Jun 16, 2011
Dynamic block is for a title block which can be horizontal or vertical and a few different positions.
My lookup table controls the orientation and position of all the items including a number of attributes. But for two attributes I have allowed a grip on the Point Parameters so they can be dragged left/right if there is not enough room when the text is longer.
I can reposition the attributes but if I reposition twice then the Lookup table resets to its "Unmatched" configuration which I don't want. I believe I have to have an "unmatched" setting and "allow reverse lookup" and at the same time I want the user to be able to customize the position of these attributes.
View 3 Replies
View Related
Nov 27, 2012
This is my first dynamic block, and I am trying to make a pipe elbow that is selectable for pipe diameter, arc angle of elbow, AND radius of elbow. I got the diameter and the arc angle just fine, but I can't figure out how to do the radius of the elbow. I used a lookup table for the diameter constraints and I used my visibility state for the angle, seeing as I couldn't find a way to accomodate arc angles with a lookup table. What I'm stuck on is the radius bit.
I need to be able to select the radius or the elbow as either 1.5x, 2x, or 2.5x the diameter of the pipe. So for example, if I have a twenty inch pipe diameter, I need to be able to set the centerline radius of the elbow as either 40, 50, or 30 and then have the outside and inside radii fit proportionally. So in the case of a 20 in diameter, I would need one block with one variation that has radii of 30, 40, and 50, another variation with radii 20, 30 and 40, and yet another variation with radii 40, 50, and 60. I could easily make a reverse lookup table to do this for a single size pipe, but in order to do it for each pipe diameter I would need to be able to cross reference the other lookup table to pull the diameter value, and then have the radii respond to that value.
If this is even possible? And if it is not possible, how I could edit the arc angles with a lookup table instead of a visibility state? Because if I could do that I could use my visibility state to do the radii instead. My other options are to create a second and third dynamic block for each variation, or to add each individual radii variation to my lookup table. The latter of which I won't do because that is far too many options for a lookup table that already spans beyond the extents of my monitor. How I could accomplish all three of these tasks with a dynamic block.
Attached is the block as I have built it so far.
View 4 Replies
View Related
Nov 2, 2012
I created a dynamic block of signatures when i was messing around with dynamic blocks and have been using it since. i have to update this dynamic block and add another signature to it but for the life of me i cannot remember how to add/remove from the lookup table. i added the name to the visibility table i just cant remember how to edit the lookup table ?
View 1 Replies
View Related
May 7, 2013
weldsymbol.dwg
Since weld symbols are regularly used in my day to day work, i thought of making a dynamic block. I had zero knowledge of dynamic blocks at that time. I realized that its actually very difficult to make a type of dynamic block i wanted. So instead of breaking my head to create it, its better to downloaded it.
Attached is the drawing i found on a forum. Its extremely cool, that's exactly what i wanted. The multiple toggle is extremely useful. That's what i wanted but was unable to create.
How this multiple lookup toggle were created without any visibility state?
View 9 Replies
View Related
