I have a corridor drawing with my corridor and have sample lines ever 25 feet. I would like to generate my sections in a seperate drawing. Is this possible?
(I am trying to keep different pieces to my project in different drawings.)
Running version 2012 of Civil 3d
We have an urban divided highway resurface and widen project. We have an eastboiund and westbound corridor we would like to get to display on our single set of cross sections
We originally set up our corridor to do the widening and ditches portion and then went on to do the work to set up the model to do the resurfacing. When we did the sections for the ditches only they displayed fine. Now that we have the resurfacing incorporated into it the ditches no longer display.
we have reviewed the targets of our assemblies, we have reconstructed the cross sections, to no avai. The software is not doing us any good right now. Need to get smarter
I want to create cross sections in a blank drawing via a Data shortcut Project.
My intent is to keep my file size to a minimum. I can include surface, alignment and profile per data shortcut but not my corridor. My corridor is 3000 feet long and when I do cross sections in the same drawing, it runs real slow.
I am trying to generate my quantities by creating sections with template to do the cut and fill, however after i create the corridor and the corridor surface which should use the bottom of the curb, instead it is using the top of the curb. How can i change it so that it uses the bottom of the curb. It is a road crossection which i used from toolpalette, CIVIL3D 2012
View 1 Replies View RelatedAlthout I have created the widening on my aliment and used a designer critery on my corridor, I can't achieve that the corridor use the widenig on the curves.
I need that the corridor generate the widening on the curves, I can't stake the corridor without widening.
Please see attached.
I have sevreal corridors with various spurs. The contractor wants the cut/fill volume in sections along the corridors, not one big cut/fill calc. Is there a way to do this in C3D? I have got the volume table with the chainages on, but he does not want a cumulitive figure for the whole corridor.
View 1 Replies View RelatedWe have created sections from our corridor. We see FG and EG, we can use bands for EG from surface. How do we get the FG band to show the elevations for FG? The only option we have is the EG surface. We have tried to create a surface form the corridor in the corridor properties but that surface still doesn't show up in the surface list in the bands. I would have thought this info would be dynamic and come directly from the corridor would it not?
View 3 Replies View RelatedI do a lot of visualization work I need a corridor top surface split by material FAST. before I used Corridor Solids but I don't have the extension in 2013. So I export to CivilView, so far so good, then attempt to roundtrip the mesh back in Civil3D and that is where things fall apart.
Export to DWG is not split by material
Export to 3DS results in a blank screen
Export to FBX comes in missing large chunks of mesh out of scale and in the wrong location
I have a corridor with 2 intersections. It is more or less like a main road with an off-ramp and an on-ramp, both on the same side, with a big triangle shape island in between them. It involves an existing road widening and a connection with another existing road. Since it is a real scenario, the intersections aren't perfect 90 degrees nor the offsets are constant.
Create Western intersection and change offset and curb return targets to design aligments.Create Eastern intersection and change offset and curb return targets to design alignments.Model the corridor as per design requirements.Due to design constraints, I ended up removing both intersections. I didn't delete all the offset and curb return alignments although they're not targeted on any region. Deleting this alignments seems to make C3D crash. the actual intersection definition hasn't been removed, as I read on other threads. I kept on getting a couple of error messages on Panorama Event Viewer every time I rebuild the corridor.
So, the problem comes when I try to output the cross sections from this nice looking corridor. They all look fine until they reach the intersection area. From the intersection onwards, the corridor is not displayed on any cross section. Even way passed the western intersection.
Why the corridor doesn't display on the cross sections passed the deleted intersections?I have a bad feeling that removing the intersection wasn't a good idea in the first place but it's too late now.
Section editor shows the Existing Ground and the Assembly correctly. But "Create Multiple Views" Shows a blank Grid from -10 to 0..... Corridor rebuilt...
View 5 Replies View RelatedI have a corridor with two baselines, one on the south side of the road, and one on the north side. The south baseline appears correctly in the section view. It is an asphalt bike trail with a ditch to the left side. The north baseline was not appearing at all. The assembly was just a ditch with nothing else. I changed the north baseline to use the same assembly as the south to troubleshoot. The pavement comes in, but the ditch still does not appear.
I can see the ditch feature lines on my corridor (see attached), but they are not appearing in the section view.
I have created a proposed centerline along my existing roadway, which represents along my profile. I have created an assembly for my proposed raod with a crown, and a 2% cross-fall in each direction.
But when I generate my sections, all my proposed assemblies show up in the proper location on my section views, except there is no cross-fall showing on any of them? They are all being shown in my sections as dead flat! 0%? I've been looking for a setting to change this.? I have also deleted, and recreated my corridors and regenerate my sections, only to get the same results!
I have an existing surface. I created an alignment and have managed to make "multiple cross" section out of the surface without making corridor and its fine. Now, the problem is I cannot finding any option to make report out of these sections. I need those report very soon..I have even attached th dwg file which contains all the data.
View 9 Replies View RelatedWhen opening a drawing that has corridor model xrefed in, the corridor section is not updating automatically.
If I reload the xref, it updates.
If I manually synchronize the alignment, it updates.
But just opening the drawing, it does not update.
I have even tried using the OTB tutorial drawings. Same problem.
Not having cross sections update automatically?
Windows 7 Pro x64
Civil 3D 2014 HF1
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
Have tried on several machines with same result.
Have to manually reload xref after opening drawing to get sections to change.
Autodesk, Can I get some confirmation that it is working, or not?
Windows 7 Pro x64
Civil 3D 2014 HF1
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
I saw on you tube channel [URL].........
How to make this label where I can show the design slope in plan.
Is it possible to have the production tool for cross sections create separate sheet drawings, rather than creating multiple sheet layouts in one drawing?
View 3 Replies View RelatedI have added intermediate sample lines in my corridor. These sections appear in the section editor and I can make changes to the data. The changes show correctly in the section editor and section view, however, when I plot the cross sections some of these added stations do not show the overrides. They are showing the original assembly group parameters. How do I get all the cross sections to reflect the edited data from the section editor?
View 3 Replies View RelatedCan you reverse the direction of an auto feature line generated from a corridor in C3D 2012?
View 4 Replies View RelatedI mad e the mistake of creating my corridors for a large site in the same drawing, and now I would like to pull them apart into individual drawing files for each corridor. I thought that last time I tried it, the drawings or data somehow got corrupted. I am running C3D 2009.
View 1 Replies View RelatedI have created a surface from a corridor. I set the boundary of the surface to the daylight of the corridor. In some areas of the corridor the surface does not triangulate see attached.
View 2 Replies View RelatedCopy a corridor successfully? I'd like to try this just a little worried about the explosion of evil this may cause to my Civil 3D session.
Even all the properties of the corridor setup from one to another would be useful. I'm building one corridor and an 2nd one that matches everything except I need to replace my Assembly with one meant for stripping.
My corridor surface is not matching my corridor top links. see attachments. this is affecting my volumes!
The section-plan(surface red).png is showing the section editor and the plan view. the red highlighted line in section is the corridor surface and as you can see in plan view the surface is incorrect and wiggly.
The pdf is all my sections with the red linework being the corridor surface.
C3D ver 2012
Win 7, 64bit
I've tried to use it, but how to generate the flashing light in a separate object. This is possible because while trying I did it, but now I cannot do it and it does the flashing light in the same layer of the background of the image.
View 2 Replies View RelatedEventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
how to generate the 2D drawing from the 3D model with AutoCAD 2010. I ever used SolidWorks which offers this capability.
View 9 Replies View RelatedMy boss said i could generate an isometric view of a drawing if i have the plan, elevation, and side views (makes sense enough). how do i go about doing this? is there an existing thread i can be forwarded to? (searching "isometric" didn't seem specifically useful.)
View 9 Replies View RelatedIs there any auto generate command to retrive the part drawing from assembly drawing rather than open part one by one to retrive the drawing?
View 9 Replies View RelatedI've been trying to work out how to generate a whole lot of smaller drawings from a bigger drawing, automatically through Scripting and Lisp programming. Each of these smaller drawings would be based on a rough 20 metre buffer of the property boundaries inside it. Each drawing created would preferably be the expression of the House number + Street name, which are in each property boundary parcel as object data. What I have been doing in the past is attaching and querying the required drawing one by one but this takes a while and we are about to get a whole shed load more to be done.
View 9 Replies View RelatedI am trying to generate automated drawing for my assembly and iam trying to run the following code
Imports Inventor.ViewOrientationTypeEnum
Imports Inventor.DrawingViewStyleEnum
dim oDrawingDoc as DrawingDocument
dim oPartDoc as Document
dim oSheet as sheet
dim oTG as TransientGeometry
dim oView1 as DrawingView
[code]....
but when i run the code its asks me whether you want to generate the drawings, but when i say yes shows runtime argument error as show below
Error in rule: Rule0, in document: pin
The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
when i ask for more info it shows the following error
System.ArgumentException: The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
at Inventor.Documents.Add(DocumentTypeEnum DocumentType, String TemplateFileName, Boolean CreateVisible)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)
I have a complex part and make a drawing. i want to make sections and details and to put some of them in another sheet in the same file. Also, can i put the hole table in another sheet?
View 1 Replies View Related
