Attached are two files: 1 file has 0 values on the volume table, and the other file has Sample line group Properties.
Surface 3 is the surface that has the existing actual survey points . Do I have to pick another surface : the other two are the surfaces I created in the Corridor as surface boundaries , Top and Datum
I have just created a Total Volume Table and everything is perfect in Model, but when y change to layout, the table is miising. I can barely see the title of the table zooming, but anything else. The tables are still there, but so tiny and with just the title, there is no data!
View 1 Replies View RelatedI oftenly do conception for parkings and always need to have the calculated rentention of water volume in the pipe network.is there a way to have that information with Civil 3d ?
Googled the subject and i only found a topic on trench's for the pipes ...
Cyberflow
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro
I have learned the hard way that Civil 3D has a Curve Tolerance value that is to be used when applying sample lines and computing average end cross section volume calculations along an alignment with a curve. How I discovered this was by double checking my self and using a straight alignment verses an alignment with a curve. When using the alignment with a curve the average end cross section volumes differ. I did some reading in Autocad help and it mentions that sometimes a curve tolerance value is needed when using curves and this value is changed in the compute or edit materials window. What is a curve tolerance?" The edit materials window prompts a user to enter a Degree value. How do I calculate this curve tolerance value? I assume it is related to one of the values of a curve.
View 6 Replies View RelatedIs there a way to add a column that would show for each elevation range the percentage of the total area?
View 1 Replies View RelatedI am using C3D 2012 and i know how to create a table showing volumes for different elevation ranges with different colours, but how to show the total cut or fill for the volume surface in the same table so that you dont have to manually add up all of the cuts or fills? or have to display only two ranges?
View 1 Replies View RelatedHow to get the Volume Elevation Table masking to work?
I can only get the Title to work correctly - everything else plots as a black blob if Fill is on. With Fill off - there is no mask.
How to calculate in a table the volume of cut and fill between the stations, The horizontal and vertical alignments are generated along with their sections. I’m wondering if there is a tool that summarize the volume of cut and fill between the stations in a table.
View 3 Replies View Related about a Volume Table style, where I have correctly showing in Model Space and is "Split" in the Table Properties. This is a "Total Volume Table" and is Dynamic.
Just Fine in Model Space... yet is showing within a Viewport (typ. plan sheet) that each Split is simply Staked ontop of each other ?
Thought I (we) came across this a few years ago... yet no issues latetly till now, and also mainly first time I've likely split the Table in R2012 (currently used).
Have maintaining View Orientation "true", yet still nothing.....
Xi Computer (Win7 64bit O.S.)
i7 3770K @ 4.5GHz Sealed Water Cooler
Quad Core w/ Asus P8Z77-V LE mobo
16GB DDR3 @ 1600Mhz RAM
15K Seagate SCSI H.D.
Nvidia Quadro 2000 (span2) + FX4600 (3)
ViewSonic VS2436 series displays (3)
I want to know if it is possible to calculate the water displacement volume of an assembly if it were immersed in water.
In other words, I want to create a file in which ALL hollow spaces inside structural members, valves, pipework etc are assumed to be solid so that when that assembly is dropped in water, the total volume of water being displaced will be equal to the iProperty value for volume. I know its possible to hole patch when creating a shrinkwrap, but this is only effective for 'circular' hollow spaces and does not fill obscure or rectangular shaped empty volumes.
(I'm using Civil 3D 2011)
I have a corridor with an associated sample line group, and I have produced some material volume tables to give me quantities for my corridor structures and cut/fill volumes. When I look at the material volume tables they are at a seemingly arbitrary stationing. The sample line group which the material volume tables are (supposedly) based on are on alignment L1000 and they run from station 1133+73 to station 1154+00 every 10 meters. The material volume tables show volumes broken down by stations starting at station 3719+58.66 and runs through to station 3786+08.92. It is sampling at a seemingly arbitrary frequency, there is absolutely no alignment in my drawing that has stations remotely resembling those numbers, and there is definitely no sample line group it could be using that samples an alignment or stationing anything like that shown in the materials volume tables. Here is a quick screenshot of what my material volumes tables look like:[URL]
Is there a way to generate a volume report for a bounded volume surface?
View 3 Replies View RelatedI'm working with TIN surfaces, doing cut/fill comparisons for a surface mine.
My volume surface statistics show a cut volume of 5167.22 cy and fill volume of 8456.18 cy.
The sample line group volume report show cumulative cut of 5527.67 cy and fill of 8465.56 cy.
What could be some causes of this disparity. All reference surfaces are built from points and use a non-destructive boundary.
I've read a few threads on this way back but cannot locate them. I have two surfaces and create a volume surface and it reported the volume as 493 cy. I then ran some sample lines at 25 foot interval and the total volume is reported as 964 cy.
View 1 Replies View RelatedI want to use it as my primary hydrologic and hydraulic modeler. It only makes sense. Well, I got the program to work and had things linked in and was able to route a storm through the network. But when I routed the storms, I had to model double the storage that i expected.
So I went back to the program I'm familiar with - Pondpack by Benltey - and designed the same system I routed in SSA in that program - and got the storage volume that I would expect for a site of this size - about 2 acres.
Is there possibly a setting that I'm missing that makes my outlet structures route slower or less than they should? Or is there some other reason that a system would give this kind of inflated need for storage?
I have an issue with using Bounded Volume or Adding a Boundary to Volume Surface things so bad... = incorrect volumes.. sometimes extremely incorrect.. I understand that the surface rectangle when a boundary is added but this could be horrible if not checked.
View 3 Replies View RelatedI need a lisp file that can read the total length of selected object (lignes, polylines) and summarize them by layers or by color in a table
e.g
command:tl (total length)
select objects
found total length.......
select object (Ent)
total length or [Add/Subtract/Table] :
total length = .......
if table
Enter an option by [ Layer/Color/line Type/line Weight] <layer> :
I've created a table through data extraction using blocks for data. The table isn't showing the text for comments, keywords,title or subject that is in the drawing file for the different blocks.
View 0 Replies View RelatedHow to add a volume column to ipart author table?
Evantually I need to display a table with part weights.
Inventor Professional 2013
Vault Collaboration 2013
Is there a way to have no layer value set for the description keys. I set all the layers, and now I realize I'd rather set this to no layers (boxes are all unchecked). I'd rather see no value under the layer column, but there doesn't seem like a way to set this.
View 1 Replies View RelatedI need to insert a table on one of my Inventor drawings, however, it will vary in size (Fixed colums, variable number of rows). I have searched the forum and found this snippet of code to add a 2x20 table.
Sub Main()Dim oDrawDoc As DrawingDocumentoDrawDoc = ThisApplication.ActiveDocumentDim oSheet As SheetoSheet = oDrawDoc.ActiveSheet' Set the column titlesDim oTitles() As String = {"Member","Pos. From Datum A"}Dim oPoint As Point2doPoint = ThisApplication.TransientGeometry.CreatePoint2d(1, 28.7)' Create the custom tableDim oCustomTable As CustomTableoCustomTable = oSheet.CustomTables.Add("Infill Spacing", oPoint, 2, 20, oTitles)End Sub
The Problem
I now need to be able to do two things:
1. Delete all custom tables that may be on the drawing ( I may have more than 1 custom table on the drawing)
2. Access the individual rows and colums in a specific table so I can write a variable into them.
I have searched high and low for the API commands, but cant seem to find them.
I want to edit some values in the data table of a shape file (*.shp) with AutoCAD Map 3d 2013. Every time I alter a value in data table it takes about 30 seconds until AutoCAD Map saves (?) the value. I have to wait 30 second until I can continue working. Why is this so slow?
The shape file has 7000 lines and is stored on a local drive.
i was wondering if it's possible to change the default precision of values in the drop down menu for linear parameters when using a block properties table from 4 digits to 0.
See attached file, when opening the dropdown menu, the centre-to-centre widths of the chair are displayed in a value with 4 digits "behind the comma" and i would like that to be 0.
Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies View RelatedI have an image that is in grayscale and I need a table that displays each pixels grayscale value. Is there a way to save the image in some tabular format or can I convert it any other way in photoshop?
View 13 Replies View RelatedHow can I transfer (download) measured data from total stations 'Trimble' and "Leica" to AutoCAd Civil 3D 2013? Must I find a module from the sites of these manufacturers? Or how can I change from total stations formats to the Feald Book format?
View 6 Replies View Relatedwhy my model shows an event mean storage of 20396 cf when I don't have any storage nodes? How is the model storing that amount of water? I'm thinking this is why my total inflow doesn't match my total outflows?
View 5 Replies View Relatedi need to guide for using sanding total station for exchange data now my question is that do there is any way in civil 3d survey menu that i can use sanding total station for exchange data?
View 1 Replies View RelatedI love the area command how you can pick multiple objects and they highlight and adds the total. I was wondering is there a way to do that same concept but with multiple objects and total it to acreage?
View 9 Replies View RelatedAngle-distance method to stake out the horizontal alignment by total station,Assuming that the total station with reflector is the tool that it is intended to lay out the circular curve after being designed then the only way to do so is to construct a table that contains angle-distance values.
I’m wondering if the C3D can provide this table (attached)
