I have an image that is in grayscale and I need a table that displays each pixels grayscale value. Is there a way to save the image in some tabular format or can I convert it any other way in photoshop?
View 13 RepliesI've created a table through data extraction using blocks for data. The table isn't showing the text for comments, keywords,title or subject that is in the drawing file for the different blocks.
View 0 Replies View RelatedI open my file (which has an embedded srgb color profile) in photoshop (my rgb values are 246/205/218). When I use the color picker, it confirms that my color is accurate. Then I save the file as a JPEG (using maximum-12, and baseline), also embedding the same srgb color profile into the photo (which is also my working space btw). Then when I reopen the JPEG file in photoshop, and use the color picker.... my srgb values are (246/205/219). The difference is so small that it doesn't make a huge difference, but why is this happening? My PSD file has of course maintained the original rgb values.
View 14 Replies View RelatedAttached are two files: 1 file has 0 values on the volume table, and the other file has Sample line group Properties.
Surface 3 is the surface that has the existing actual survey points . Do I have to pick another surface : the other two are the surfaces I created in the Corridor as surface boundaries , Top and Datum
I need to insert a table on one of my Inventor drawings, however, it will vary in size (Fixed colums, variable number of rows). I have searched the forum and found this snippet of code to add a 2x20 table.
Sub Main()Dim oDrawDoc As DrawingDocumentoDrawDoc = ThisApplication.ActiveDocumentDim oSheet As SheetoSheet = oDrawDoc.ActiveSheet' Set the column titlesDim oTitles() As String = {"Member","Pos. From Datum A"}Dim oPoint As Point2doPoint = ThisApplication.TransientGeometry.CreatePoint2d(1, 28.7)' Create the custom tableDim oCustomTable As CustomTableoCustomTable = oSheet.CustomTables.Add("Infill Spacing", oPoint, 2, 20, oTitles)End Sub
The Problem
I now need to be able to do two things:
1. Delete all custom tables that may be on the drawing ( I may have more than 1 custom table on the drawing)
2. Access the individual rows and colums in a specific table so I can write a variable into them.
I have searched high and low for the API commands, but cant seem to find them.
I want to edit some values in the data table of a shape file (*.shp) with AutoCAD Map 3d 2013. Every time I alter a value in data table it takes about 30 seconds until AutoCAD Map saves (?) the value. I have to wait 30 second until I can continue working. Why is this so slow?
The shape file has 7000 lines and is stored on a local drive.
i was wondering if it's possible to change the default precision of values in the drop down menu for linear parameters when using a block properties table from 4 digits to 0.
See attached file, when opening the dropdown menu, the centre-to-centre widths of the chair are displayed in a value with 4 digits "behind the comma" and i would like that to be 0.
How do I make a color image grayscale in photoshop?
View 1 Replies View RelatedI use some graphics software that accept the image in the form of grayscale as follow :the software then convert this grayscale to a 3d relief.is there a method to convert any image to such format with there details ?
View 4 Replies View RelatedI happened to download a rather dark black and white entry into Photoshop and noticed it was several shades lighter in Photoshop than in my browser. It loaded in Photoshop in Grayscale mode. So I tried this:
1. Open Photoshop.
2. Set the background colour to 53 Red, 53 Green, 53 Blue.
3. Select File - New, set the Width to 800 pixels; the Height to 600 pixels; leave Resolution at 72; set Color Mode to Grayscale - 8 bit; set Background Contents to Background Color; and click OK.
4. Save as a jpeg (maximum quality).
5. Open the jpeg in your browser.
When I do this the browser image (I tried both IE and Firefox) is a shade or two darker than the Photoshop image. I used the Colorzilla extension in Firefox to measure the actual color displayed and it comes out at 37 Red, 37 Green, 37 Blue.
I have a creative director who loves to bring grayscale tiffs into quark xpress, set the color of the tiff to one color and then select the image background "box" and set it to another color.
The result is visually ok, but it all has to be recreated in photoshop to print well. I have been using photoshop for years, and a duotone is not the answer, at least with the curves i have played around with.
What is the best way to recreate this effect in photoshop?
Lately I have been experiencing this weird problem. Every time I try to convert my image to grayscale mode, instead of just being black and white the image turns purple. Is there anyway to fix this problem? ....
View 5 Replies View RelatedI will submit the Black and white ad created in Photoshop to the magazine. The requiment is that for grayscale images, the shadow density should be no darker than 90% and highlights should be no lighter than 3%. I don't know how to check the percentage on the document I made. I checked HELP in Photoshop and website. But I couldn't really get answer from them. I have little knowledge of printing. Please give me advice or helpful website.
View 2 Replies View RelatedI have a grayscale image that I want to apply color to. I know how to do that by just colorizing it, but instead, I want to apply a color for the whole document. I know how to do this if I want it to be, say, blue (where black is 100 percent of my blue and 50% gray is 50% of my blue, etc.). But, what if I want a unique gradient across the image (where 100% is blue, 50% is 50% red, 10% is yellow, etc.)? How would I do that?
View 2 Replies View RelatedI flatten an Image, All the colors change to grayscale. Like if you look at the color chart, you see all the normal colors, but if you try to use a color it just comes out different shades of gray. Its horrible, and it happens everytime.
View 2 Replies View RelatedI use Photoshop LE 5.0, which has many of the BIG Photoshop features.
If I take a web page screenshot and turn it into greyscale and print that,
I still get some colors coming thru on the printout, even though it looks b/w on the screen.
Is this a common problem? Photoshop or Printer or Windows?
The image is basically a grayscale height map created from Digital Elevation Models, and exported out of another program as a 16bit tiff. I know photoshop can handle the idea of a 16bit image, but no matter what I do, these come out black. i've tried dumping it out as signed, unsigned, stretched, etc. I can't mess with things like contrast or brightness globally cause that will alter the values which have to stay the same.Basically it needs to open in photoshop cs5 as what it is and save off the same way.
I don't have any other way to do what I need to do to it other than photoshop, so if there is a way to make this work, and no, converting it to 8bit is not an option.
Why are the image thumbnails in the channels pallet not showing up as grayscale images? They used to, and for some reason or another aren't any more for me. Instead, they are showing up red, green, and blue for each respective channel. I'm on Mac, using CS6.
View 3 Replies View RelatedThe starting point:
I have a JPG image of a battlefield wherein the height contours in feet are marked as faint lines (like a closed contour line for 390 feet, another for 420 feet, etc etc.)
The desired final product in Photoshop:
A grayscale RAW document that shows the height variations in gray tones.
Low lying troughs need to be darker and higher elevations need to be lighter.
See picture below for example:
I am ignoring the roads and other features in the battlefield.
All I am interested is the technique of converting the height contours into a smoothly varying grayscale image.
I am a complete Neanderthal when it comes to Photoshop. I do have a copy of Adobe Photoshop CS3 on my PC.
I have been toying around with the package on and off. But nothing useful has come out yet.
Now to my specific questions
*How do I bring in the height contours into Photoshop? I have tried the magnetic lasso tool and able to trace a height contour with good fidelity.
I am kind of stuck at this point. Do I save the selection to a new layer? Do I thus create one layer for each of the height contours?
Say one layer for the all the 390 feet contours, another layer for the 420 feet contours, one more for the 360 feet contours etc etc?
*Assume that I have somehow brought in all the height contours successfully into a new Photoshop document.
How do I create a gradient effect between the contours?
The lowest height in the map is 300 feet and the highest areas are at 480 feet.
Thus the area enclosed by the 300 feet contour lines needs to be darkest (pitch black) and the area enclosed by the 480 feet contour lines needs to be lightest (pure white).
The areas in between need to go progressively from dark to light shade.
How do I achieve this?
*Assume that I have created now a PSD document that has these smoothly varying grayscales. How do I convert this to a RAW image?
how to use the match color tool to automatically convert one grayscale image into multiple output images based on a collection of color swatches? Or a better process to achieve this automated?
I have all the swatches in psd files in one directory. I can do them one-by-one but I was wondering if there was a way to automate this process and have it spit out and save the different images automatically based on the saved swatch colors.
I downloaded an image of the internet to edit [URL]......
Because I want to edit the base and put clothes on it and such. I opened the image in gimp and added the lines for the clothes on multiple layers. I went in to color it and the color showed up grey, any color i used turned out to be grey. Then I looked up at where they put the name of the image and it says: (greyscale, 6 layers) I assume that why i cant color it. is their any way to change this so i can add and edit color?
eliminate the fragments from a grayscale image. I used a JPG. You never get just black and white because of the edge transition. So, the image was made bitmap transparent, and contone recolored light and dark to red. You don't get edge blending this way. Xara alphe channel traces to black, therefore the image needs to be something other than black. I made a bitmap copy/alpha for tracing. You need a copy othewise the trace image would be gray scale. Xara seeems to take what is in memory. I think you can see the alpha channel traces black. Xara appears to trace from the bottom up, and the bottom of the image will trace to the background object.
View 3 Replies View RelatedI need to transform a selection of ranges of grayscale image in colors. For example: using GSM of a gray scale image as a parameter I want to recode pixels from 0 to 20 in red, 21 to 40 in orange, 41 to 60 in yellow and so forth... until pixel valued 256 in GSM.
View 2 Replies View RelatedI have a color .jpg image that I want to convert to grayscale and then add annotation. Is this easy to do in Illustrator?
View 9 Replies View RelatedI have searched the forums and can not find an answer to this question.
If have two pictures of the same size, taken on the same camera with the same settings.
When I open one in Photoshop it opens at 72 dpi.
The second one opens at 300 dpi.
Please can someone explain why Photoshop does this or is it something I am doing?
I HAVE PASTE EXCEL FILES ON MY DRAWINGS BY USING PASTE SPECIAL, AUTOCAD ENTITIES, AFTER THAT WHEN I SAVE MY FILES IT COMES LIKE THIS:
SAMPLE.dwg" has a command in progress.
Hit enter to cancel or [Retry]:
I ENTER IT EVEN RETRY IT BUT MY FILES STILL NOT SAVE.IS THERE'S A WAY TO SAVE MY FILES AFTER I PASTED EXCEL?
i'm using gimp 2.6.11 on a windows 7 enterprise machine. I made some brushes in rbg mode and saved as gbr, and also converted some ps brushes by exporting an abr as a png in rbg mode then saving as gbr. my goal is to get a gbr brush that i can change the color to the foreground color. I tried changing the mode from rgb to greyscale but when i try to re-save as gbr i get an error message that brushes can only be saved in greyscale or rgba (!).
i've tried saving the gbr as a png, changing the mode to greyscale and then saving as gbr but i get the same error message.
Any good skin texture brushes for gimp that can be used with foreground color? It's for a digital portrait of a male so I need an orangepeel texture and some other skin textures that aren't too airbrushed.
I'm new to GIMP. I've used Adobe Photoshop for years an years and no longer have access to the license. So I've been giving GIMP a test drive for a little while. I'm confused as to why when I apply a filter to my image or layer it changes the color to B/W or grayscale? I'm sure this is a relatively easy fix, but most filters I'm using don't have many options and I can't seem to apply the filter "as is". It always changes my whole graphic to grayscale. See "Before & After" attachments.
View 1 Replies View RelatedI've had gimp for quite awhile now and ive never come across this problem before. im trying to use the layer mask with greyscale and inverted image just as i always have. but when i go to edit my color i get grey! ive always been able to change colors this way! i know that the mode is set to rgb. im on the correct layer. ive closed it. ive restarted my laptop.
If i click on the transparency part i get a big blob of color as i should. but on the mask it does what its supposed to but in shades of grey. i dont understand whats wrong! it always worked perfectly. . .
newest Gimp
windows 7
Only thing that i have changed is i have a new tablet but i still have the problem without the tablet
I've been trying to hatch a complex image with a single pattern, but with different stroke weights.
Here I added an image of a simple greyscale image with below the hatching that I'm trying to make. In short: I want to use only 45 deg. hatches in this direction. However, based on the grey value, I'd like the hatches to have different weights.
However, since this image is quite simple, only four different weights were needed. However, I'd like to know if there is an easy way to do this for complex images. For this image I just used pattern fills with different stroke weights, but I'd like a smoother and easier solution, preferably one where it would be possible to have many different weights without having to split up the image in thirty different parts and making thirty different pattern fills.
I'm not sure if this is possible, but I might be overlooking something. If it would be possible with a plugin, I'd like to know too. Even if there might be a workaround via Photoshop, and the end-result would not be a perfect vector, It'd be fine.
I used the Block Properties table in dynamic block editor. I picked 3 out of 6 atributes to include in the Block properties table and I inserted the predefined values. When I view the block in testblock edditor everything works. Everything works also in the same drawing were the block was created. I can choose the predefined block vallues from the dropdown list.
The problem is that when I save the block in the block edditor as new drawing, for the purpose to use this and include this block in another drawing, then the attributes witch were associated with the Block Properties table are missing. They are also missing when I open the block editor in the new drawing. The attributes that were not associated with the table exist.
I have added 2 files. 1 with the block created in the same drawing and another where the block was saved an inserted to a new drawing.