I've created a table through data extraction using blocks for data. The table isn't showing the text for comments, keywords,title or subject that is in the drawing file for the different blocks.
View 0 RepliesAttached are two files: 1 file has 0 values on the volume table, and the other file has Sample line group Properties.
Surface 3 is the surface that has the existing actual survey points . Do I have to pick another surface : the other two are the surfaces I created in the Corridor as surface boundaries , Top and Datum
I need to insert a table on one of my Inventor drawings, however, it will vary in size (Fixed colums, variable number of rows). I have searched the forum and found this snippet of code to add a 2x20 table.
Sub Main()Dim oDrawDoc As DrawingDocumentoDrawDoc = ThisApplication.ActiveDocumentDim oSheet As SheetoSheet = oDrawDoc.ActiveSheet' Set the column titlesDim oTitles() As String = {"Member","Pos. From Datum A"}Dim oPoint As Point2doPoint = ThisApplication.TransientGeometry.CreatePoint2d(1, 28.7)' Create the custom tableDim oCustomTable As CustomTableoCustomTable = oSheet.CustomTables.Add("Infill Spacing", oPoint, 2, 20, oTitles)End Sub
The Problem
I now need to be able to do two things:
1. Delete all custom tables that may be on the drawing ( I may have more than 1 custom table on the drawing)
2. Access the individual rows and colums in a specific table so I can write a variable into them.
I have searched high and low for the API commands, but cant seem to find them.
I want to edit some values in the data table of a shape file (*.shp) with AutoCAD Map 3d 2013. Every time I alter a value in data table it takes about 30 seconds until AutoCAD Map saves (?) the value. I have to wait 30 second until I can continue working. Why is this so slow?
The shape file has 7000 lines and is stored on a local drive.
I have tried multiple ways to have the intensity from our pointclouds show up inside Autocad 2013 with no success. I have tried multiple jobs exporting different formats from Cyclone 7.4. The file types I have tried are PTS, PTG, and PTX. All of these file read into AutoCad 2013 and create a Pointcloud. In AutoCad the pointcloud properties state that intensity values have been loaded, but when I attempt to view them the cloud stays white. I have also tried all the Shademode types in AutoCad. The intensity values from Cyclone appear between -1000 and +1000 values. The following is a list of steps I tried on multiple projects. Software Cyclone 7.4- AutoCad 2013 File types exported and imported PTS PTX PTG Shademodes Used All Standard Modes.
View 2 Replies View Relatedi was wondering if it's possible to change the default precision of values in the drop down menu for linear parameters when using a block properties table from 4 digits to 0.
See attached file, when opening the dropdown menu, the centre-to-centre widths of the chair are displayed in a value with 4 digits "behind the comma" and i would like that to be 0.
I have an image that is in grayscale and I need a table that displays each pixels grayscale value. Is there a way to save the image in some tabular format or can I convert it any other way in photoshop?
View 13 Replies View RelatedI've created this dynamic block for work. Its an overhead cupboard with 4 doors. My problem is that when i create a table through data extraction the value for the length and height for the doors aren't shown (The column this there with a heading, no value), the length of the cabinet and visibility is though. Do i need to assign an action or something for the value to be displayed?
View 6 Replies View RelatedI have a surface that I have done a slope analysis on and want to put a table showing the slope grades. I have made a viewport and would like to put the table in paperspace. However, when I zoom in paperspace and regen the table changes size. How or where do I keep the table from changing size. It wont let me scale it up or down.
View 3 Replies View RelatedI have recently modified the CC of a part family so that different materials for the same part can be chosen. When I exit the editor and place the component I can see the choice of the materials in the dialog box - no problems (See 1st attachment" But when I go to another users PC they cannot see any of the new materials in the "Place content center" dialog box!?!
For information, we are running Inv. 2011 with Vault Professional 2012
The CC libraries are stored on the server and we have one custom library to which I have publish the modified part family.
The custom CC has been fully synchronised with the Vault server.
The materials.xml containing the new materials used in the part family has been downloaded to the users local workspace.
Inventor 2014 Pro SP1, Vault 2014 Pro SP1
Windows 7, 64-bit
Intel Xeon 3.6GHz
32GB
Nvidia Quadro 4000
I am editing an old file set up by another firm that is used by our clients to keep track of room sizes etc, which has a room data table and room tags tied to area polylines. It has worked just fine on our 2013 Acad Architecture, but when I sent them (saved down to 2010) back to our client, using 2012 Acad Architecture, the tags disappear and the table is unpopulated.It seems like it must have something to do with the file originally being created way back when, along with some quirk between 2012 and 2013.
View 2 Replies View RelatedI have an attribute blocks and this att block has two tag values , is there a simple code for to change 1st tag values automaticly according to 2nd values ?
for example :
1st tag (50x50) - 2nd tag ( 100 ) ==> 50x50-100
if i enter 201 valuse to 2nd tag then 1 st tag has to change as 100x100
if i enter 501 valuse to 2nd tag then 1 st tag has to change as 150x510
I attached a jpg file for explain much better
Is there a way to have no layer value set for the description keys. I set all the layers, and now I realize I'd rather set this to no layers (boxes are all unchecked). I'd rather see no value under the layer column, but there doesn't seem like a way to set this.
View 1 Replies View RelatedCan AUTOCAD sum values that are entered as text values? Attached is a table text whose right final values should be all sumed up? Is this possible inside AUTOCAD?
View 9 Replies View RelatedI'm trying to show, using the eyedropper tool, the actual values of pixels in an 8-bit grayscale image (Mode command confirms that's what's there). In the Info panel, the eyedropper tool displays percentages for every type of color information (K, CMYK), while the "8-bit" field remains blank.
View 9 Replies View RelatedThe angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies View RelatedIn our company, we put Excel tables in our drawings. The reason we've chosen for Excel-tables is that we can adjust the layout of the table quite easily. These tables consist of grouped cells in a particular company-specific layout. We select the range of the desired cells, copy and paste them in our AutoCAD drawing. This drawing is sent to our customers. The disadvantage of this method is, that when our customers (who use CAD-software of other brands) open the dwg, they don't see the table, but some kind of picture of the table.
Is there a way to 'explode' the excel-table, but keep the specific layout of the table? For attributes in blocks there's the 'Explode Attributes'-command in the Express-tools, but is there something similar for Excel-tables?
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
I have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
Having an issue trying to join an access table to a shp file attribute table. I want to use the access table to cross reference the shp file for matching parcel numbers. I have attached the access table in the ODBC using a data source name however it seems to not give me the option to view any records.
View 2 Replies View RelatedI want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies View RelatedI am wanting to use an Autocad table object to display fields from an Access database table that is linked to symbols in my drawing.
My objective is create a database table that has detailed notes for call outs in my drawings and then link my call out blocks to the database table and display the blocks and linked descriptions in an Autocad table. If the notes in the database table are edited the Autocad table updates with the new the description from the database.
How can I export a excel table to Autocad not as an OLE object but as a Audocad table?
View 7 Replies View RelatedSay I had two tables located within AutoCAD, can I make it to where if I put data in one cell of one of the tables that it could automatically populate in a different cell in the other table? Also if this can be done, could it be done linking the data in-between separate layouts?
View 9 Replies View RelatedIs there a way to setup vertical alignment of text in a cell for the entire table, when using Table Tool? It is possible for a single cell, but when selecting a table (or multiple cells) this option is not available.
View 5 Replies View RelatedWe have a whole bunch of spreadsheets that we use for calculations and parts of those spreadsheets are linked to a ton of CAD Drawings via data links.
We would like to be able to deliver the CAD drawings to the client without having to send our calculation books (just the output tables). In other words, is it possible to embed the table data and remove the excel link for the final delivery?
Parts of my drawing were not allowing me to distance, dimension or trim them, so I suspected that some of the lines weren't flat. I just checked a troublesome line and it has a crazy Z value. I tried changing Start Z and End Z to "0," but that just moved the line to another place. When I put it back, the Z value changed back. If I'm able to grip points to dimension something, the dimension lines appear way below the points. Other parts of the drawing are fine.
I think I accidentally did something to the WCS, but I don't know what or how to fix this.
I am new to autocad customization and i am working on modifying a code written in .Net.I want to ask how to get the bounding box of a block and also I am unable to locate autocad customization file.
View 6 Replies View RelatedI have a drawing that is a topigraphical survey in 2D its constructed of 2D polylines, I need to convert these to 3D polylines so I can add a Z vertex then move the lines/contours to their Z value currently illistrated by text on the plines.
change the line types and easily move the lines to their correct Z value?
I just want to extract the coordinates and number of survey locations that are represented by point blocks from a drawing.
My template is on the desktop and is named
TAYLOR EXTRACT.txt
BL:NAME C008000
BL:COMMENT C008000
BL:NORTHING N0010003
BL:EASTING N0010003
I get the attribute extraction menu
select some points, verify that points have been selected
specify the above template
Specify the export file name
select ok
returns 0 records
Is there any way to create a centroid with Z values?
View 2 Replies View Related