AutoCAD 2013 :: Leica Cyclone 7.4 PTS Intensity Values Not Showing?
Oct 23, 2012
I have tried multiple ways to have the intensity from our pointclouds show up inside Autocad 2013 with no success. I have tried multiple jobs exporting different formats from Cyclone 7.4. The file types I have tried are PTS, PTG, and PTX. All of these file read into AutoCad 2013 and create a Pointcloud. In AutoCad the pointcloud properties state that intensity values have been loaded, but when I attempt to view them the cloud stays white. I have also tried all the Shademode types in AutoCad. The intensity values from Cyclone appear between -1000 and +1000 values. The following is a list of steps I tried on multiple projects. Software Cyclone 7.4- AutoCad 2013 File types exported and imported PTS PTX PTG Shademodes Used All Standard Modes.
View 2 Replies
ADVERTISEMENT
Dec 12, 2013
I've created a table through data extraction using blocks for data. The table isn't showing the text for comments, keywords,title or subject that is in the drawing file for the different blocks.
View 0 Replies
View Related
Sep 23, 2011
I would like to know the Cyclone simulation test on the switchboard?
Can it be done in Autocad 2012? What kind of software needed?
View 9 Replies
View Related
Jun 15, 2012
I am trying to import a Model Space (point cloud) from Cyclone intoCloudworx. Currently I am able to click the "Import Model Space View" and then browse to find the file I want to import. It imports it successfully, but nothing appears on the screen. What are the steps necessary to make the point cloud visible? And is there a way to import several Model Space views at once so we can manipulate them independently in Cloudworx?
View 1 Replies
View Related
Mar 21, 2013
Probably the wrong place to post this but will give it a go, I can't put contours using my basic software package so need a .csv file, column order = point, northing, easting, elevation, code.
410001+00000stn 42....+00000000 43....+00000000 44....+00000000 45....+00000000 46....+00000000 47....+00000000 48....+00000000 49....+00000000
110002+00000003 21.003+02048900 22.003+08448250 31...0+00188567 51....+0000+000 87...0+00001465 88...0+00001210
410003+00000tar 42....+00000000 43....+00000000 44....+00000000 45....+00000000 46....+00000000 47....+00000000 48....+00000000 49....+00000000
[Code] .......
View 2 Replies
View Related
Jul 26, 2013
A fundamental question that comes across regularly is calculating values for offset distances, move, radii, etc. If I want to calculate a value of .5 the interface does not accept 1/2 as a valid entry.
View 7 Replies
View Related
Aug 13, 2013
Is it possible to scale a viewport with different X and Y values? Kind of like inserting a block with different X and Y values.
View 8 Replies
View Related
Nov 25, 2013
I have copied and pasted from someone’s template to mine, and the font changes. My style is set to Arial and the other template is as well. Is there another setting I am missing or a variable that maintains the information from one template to the next?
View 9 Replies
View Related
Dec 2, 2013
changing some properties default value for 2 items i have here. I want to keep the new settings inside my dwg template but i don't find any why to do it yet.I have to modify these manually or use match properties.
THE TEXT: Has the first picture, i would like to keep the setting Line Space Style: "Exactly" instead of "at least" all the time, each time i open a new autocad. How can i modify this default value? is there a way to do it ?
THE LEADER: Has the picture, in my dimension style i use 2 mm standard closed filled arrow. BUT i like to use the "dot" style sometimes but i like to use the dot at 1 mm not 2 mm.
Is there a way to set individually each type of leader tip size ? With dimension style override it's not working for now..Or maybe if i could change the default properties value for the particular dot in a configuration file?
View 8 Replies
View Related
Jan 9, 2014
Is it possible to import real time gps coordinates from Leica CS10 to Autocad? Is it a function in Autocad or will i need a third part software to accomplish that?
View 2 Replies
View Related
Sep 27, 2013
I read in autocad help that these are saved in the registry. I'd like to change their values via registry instead of using acaddoc file. Where can I locate these in the registry? Could not find them...
View 5 Replies
View Related
Mar 12, 2013
I want to edit some values in the data table of a shape file (*.shp) with AutoCAD Map 3d 2013. Every time I alter a value in data table it takes about 30 seconds until AutoCAD Map saves (?) the value. I have to wait 30 second until I can continue working. Why is this so slow?
The shape file has 7000 lines and is stored on a local drive.
View 5 Replies
View Related
Jul 18, 2013
I have an attribute blocks and this att block has two tag values , is there a simple code for to change 1st tag values automaticly according to 2nd values ?
for example :
1st tag (50x50) - 2nd tag ( 100 ) ==> 50x50-100
if i enter 201 valuse to 2nd tag then 1 st tag has to change as 100x100
if i enter 501 valuse to 2nd tag then 1 st tag has to change as 150x510
I attached a jpg file for explain much better
View 9 Replies
View Related
Apr 18, 2013
Is there a way to have no layer value set for the description keys. I set all the layers, and now I realize I'd rather set this to no layers (boxes are all unchecked). I'd rather see no value under the layer column, but there doesn't seem like a way to set this.
View 1 Replies
View Related
Dec 12, 2011
Using Lightroom to shoot tethered to a Leica M9?how to do it?
View 7 Replies
View Related
Feb 27, 2013
In LR 3 I had the option to select Leica in the lens profile and then select from a short list of available lenses to correct the image.In LR 4.3 I can not find Leica anymore in the pull down menu and therefore I can not select any lens profiles to use as corrections.
Where can I find the missing camera manufacturer files and profiles for Leica?How can I load the missing profiles into LR 4.3.
View 1 Replies
View Related
Feb 21, 2012
If not supported for LR3, would it be available for LR4?Right now, I am using Aperture for all of my tethered capture, then importing to LR3.
View 4 Replies
View Related
Mar 8, 2013
Is it possible to make a heat/intensity theme map with Autocad Map3d?
View 9 Replies
View Related
Apr 4, 2014
I'm using LR to process DNG files from Leica M 240.
I understand LR has some extra profiles ( "Camera Faithful, Camera Portrait, etc" ) for some Canon and Nikon camera models.
As under "Camera Calibration -> Profile" I can only see "Embedded" or "Adobe Standard", does it mean these extra profiles don't exist for Leica M 240?
View 1 Replies
View Related
Apr 7, 2011
I have a 3d Drawing with very detailed light source descriptions. Is there any way I can measure a light intensity (in lux) in a specific point of my drawing?
View 0 Replies
View Related
Dec 21, 2012
Can AUTOCAD sum values that are entered as text values? Attached is a table text whose right final values should be all sumed up? Is this possible inside AUTOCAD?
View 9 Replies
View Related
May 31, 2013
How do I open raw files in CS5 with the Leica D-Lux6 camera?
View 1 Replies
View Related
Mar 5, 2013
I am currently running AutoCAD 2013 LT on a Windows 7 64 bit system. I was recently running this same software on a 32 bit system computer and everything was running properly. After the upgrade, I have noticed a linetype issue that I cannot seem to get a handle on.
We use a "insul" linetype on building sections that should come out looking like an architectural insulation pattern. After upgrading to the new computer, this linetype only reads as dots, nothing else. I have gone to other comnputers in the office that are displaying this linetype properly and have copied their acadlt.lin as well as acadltiso.lin files over to my computer and it has not solved the problem.
View 3 Replies
View Related
Oct 9, 2013
I have a user who has been using certain solids for years with no problems but now having one.
These are simple flat object types "solid" objects that are simple direction arrows. If I print it from model space they are filled in. If I look at it and/or print it from paper space (in a viewport) it shows up only as an outline of the arrow.
FILLMODE is set to 1, have tried 0 also, doesn't change anything.
View 9 Replies
View Related
Aug 8, 2012
I just switched from Autocad 2007 to 2013. In 2007, when you move your mouse cursor on a vertice of a selected geometry, a rectangle for example, Autocad will automatically display the dimension of the geometry. This features seems to have been turned off by default. How to turn it back on?
View 4 Replies
View Related
Feb 28, 2013
Showing annotation objects, I’m wondering how the two options “show annotation objects for current scale only” & “show annotation objects for all scales” introduce the same result (attached)! Despite the fact that these annotation objects are assigned to other scales (attached)
In these two cases, the only displayed annotation objects are those related to the current scale! Not all the annotation objects are displayed!
View 6 Replies
View Related
Apr 20, 2012
when I use the units command I do not get the dialog box.
View 7 Replies
View Related
Apr 16, 2012
how can i have a result of neon effect. what material should i use and how high is my intensity factor for the light?
View 3 Replies
View Related
Aug 30, 2013
I have inserted a jpeg into autocad (a map to roughly draw more information on). In model space it only shows the map and the info I want but in layout space it has a print along the jpeg showing where the image is saved. How can I get rid of the print?
It's Autocad 2013.
View 2 Replies
View Related
Dec 28, 2012
im not too hip with shapefiles/linetypes. but here is my current situation. everything was working fine for the past 2 weeks since our civil2013 install. yesterday i started a new drawing with our template, and now our linetypes are just dashed lines. its not loading the x's for fences, or any of our other custom shapes. i opened an old drawing which was working fine, and it now has the same issue.
the support file path is pointed to a local folder which contains a customised .shx file made by a previous employee here.
View 9 Replies
View Related
May 2, 2013
I had a file which, opened with Civil 3D 2013, worked fine, but one of the SID images disappeared and was shown as "corrupt" in the same drawing opened in Civil 3D 2014.
The problem was that the file name contained a character in a font not recognized by R2014. (The file name was G1105001_095-ps 12_5æ.sid) Once I renamed the file and re-attached it in 2014 it worked fine. 2013 processes this font type with no problem.
View 2 Replies
View Related
