I had a file which, opened with Civil 3D 2013, worked fine, but one of the SID images disappeared and was shown as "corrupt" in the same drawing opened in Civil 3D 2014.
The problem was that the file name contained a character in a font not recognized by R2014. (The file name was G1105001_095-ps 12_5æ.sid) Once I renamed the file and re-attached it in 2014 it worked fine. 2013 processes this font type with no problem.
can autocad 2014 import inventor ipt files?
View 3 Replies View Relatedto open two or more files in autocad 2014
becomes very slow to use?
zooming is slow?
why this happens?
I made these bunch of other parts at school this time and they use 2013 and I use 2014 at home, will I be able to open them
View 2 Replies View RelatedOne of our customer has inventor 2013 and I am working with inventor 2014.
I would like to know if there is anyway for my customer once my job is done to be able to load the Sub assembly with his software and be able to work with it ?
They told me Inventor fusion is not an easy tool and would prefered to use inventor files.
My team is using AutoCAD 2014 and multiple people have noticed that while they're working, when they try to save the file it pops up a message saying the file is read only.
Multiple people on our team has had this issue and it only started recently. (We've had it installed a few months now).Could it be the new file tabs feature in 2014?
I have drawings that are saved as ACad 2010 and need to work on them in ACad 2014. I am receiving error messages saying the drawing is damaged and requires recovery. Errors are being detected and some files I can eventually open but edits are missing. Others I am unable to open and I get a message "audit could not correct errors in database".
View 3 Replies View RelatedWhen plotting with plot styles the "use object linetype" setting in the plot style table is not working when i plot a pdf file. All the lines appear as continuous. I am unable to plot hidden, phantom, ect lines. Changing global scale has no effect.
View 6 Replies View RelatedWe've finally nibbled the bullet and upgraded to 2014. I'm getting errors in the Task Scheduler logs about missing files in various projects. It would appear that (almost) without exception, the failed files are all Content Center parts that were inserted as custom parts. Do I need to run a migration on the Content Center parts (Inventor/ContentCenter Files/R2013/en-US) in order for the custom parts to migrate properly?
View 9 Replies View RelatedI am working on a new project which is now at building control stage and am doing the following workflow:
View 5 Replies View RelatedI have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I'm using Photoshop 5.5 and OS Lion. The Finder crashed while doing a Search. When I rebooted and opened Photoshop, every Photoshop file I had worked on that afternoon, plus two from the day before, was corrupt - nothing else was affected. Desktop preview icons and file sizes looked fine, but when I opened the files they were just bands of color and noise. All layers were gone and the size was incorrect. The jpgs I had saved from the psd files were also corrupt. Adobe blames Apple and Apple blames Adobe.
View 14 Replies View RelatedWhy do my cs6 psd files keep getting corrupt? I am able to save and close them, but they won't reopen. I've lost entire website files more than once already.
View 8 Replies View RelatedI have just recently installed AutoCAD LT 2014 on Windows 7 (Running on an intel iMac through Bootcamp). Ever since then i am receiving notifications when performing a save.
AutoCAD is telling me it cannot perform the save and is creating a .tmp file in the same location on the server as the file should be.
this is causing major performance issues and happens almost every second time I attempt to perform a save. The issue is that we are getting multiple versions of the same file duplicating on the file server which is very quickly going to cause capacity issues considering most files are 2-4mb in size.
My specs are as follows:
Photoshop CS 5 12.0.4 x64
Mac Pro (2 Ghz Intel Core i7, 4 GB memory, AMD Radeon HD 6490M 256 MB graphics)
Mac OS X Lion 10.7.3
When I'm in photo shop doing photo editing, zooming in/out and doing lots of processor heavy maneuvers, my file once in a while becomes garbelled and corrupt. Why is this happening? Is there a way of preventing it? It's annoying having to start over epsecially when you have a PSD file with many layers.
Suddenly I could not open one of the file. It is not so big file (120kB) How can I fix it?
The alart appears when I tried to open it.
Problems with corrupt files when exporting to an EPS.
View 7 Replies View RelatedI bought an HP Photosmart 320 and found out too late that there was a bug in the firmware that caused problems when writing to large memory cards. I have fixed the firmware but I have over 100 photos taken before the fix that I would like to salvage. I have found many services that will recover deleted files but none that fix corrupted ones.
View 3 Replies View RelatedI'm using Gimp on very very large image files, my current image is 22000 x 23000. Gimp has 24GB of memory assigned in the Preferences menu (out of 32) and is fine while editing. However whenever I save the image as an XCF or PSD it corrupts. Occasionally with an XCF it will be recoverable but only one layer will recover. If it's exported as a PSD next time I try to open the image it says there are too many layers and is corrupt.
Is this a bug or is there a way I can preserve my large images with layers?
When importing some JPG files into Lightroom 5, it is claiming it cannot generate a preview, and then on import claiming they are corrupt. However, these files import with LR3, and open with Photoshop, Picasa, OSX Preview. The images and metadata all appear to be fine. Other photos from the same camera and shoot import correctly into LR 5.
And how do I get LR5 to correctly import these files?
Unfortunately I have found some corrupt CR2 files in my library (less than 1% so not general problem, files have been moved to my current machine from other source).
Inside Lightroom the photos (Library Grid view) are marked with an exclamation mark in the upper right corner.
Is there a way in Lightroom to search for all files which have such corruption problems? It is a rather large library to scroll through manually.
After apparently successfully capturing dv from Sony Cam (V1P) and Panasonic NVGS400 via firewire, I get message 'capture failed, corrupt files'. This happens with VS4 and VS5 both of which are installed on this computer. Settings are lower field first, dv1. All patches are installed.
View 12 Replies View Relatedwhen I try to import footage from camcorder as an AV file I'm getting message, 'Capturing failed. The file is corrupted and unusable. It will be automatically deleted'.The only recent change I've made to my laptop is renewing my Panda security.
View 6 Replies View RelatedThe camera files seem to be just fine, but my jpg files frequently get corrupt on export. They get these random horizontal lines through them, as well as big gray sections that begin part way through the file. If I re-export them, they usually come out all right. I would like to pin down the cause. I'll change the process priority from normal to realtime for now and see how it goes.
View 2 Replies View RelatedProgramme: X4
System: Windows 7 Ultimute 64bit
Installed 01/01/2012 with SP1.
Problem: When I save jpeg files some of them become corrupt and will not open.
I have been using PSP for a number of years and decided to upgrade to X4, now a number of the files that I save in PSP are becoming corrupted and they seem to all be photos which are shot using a pure white background, not all photos are affected, I never had this problem in my previous versions of PSP
I use adobe lightroom which I transfer my raw file into jpeg, this is where i then open the jpeg in X4 and do my main editing, it is when I save the image it saves corrupted and can not be opened or deleted (shows that X4 is still using the file) . it will also not allow me to re transfer the image from my catalog.
There are some good features and I am considering uninstalling and reverting back to my older program (X2).
This may be an issue with the metadata of the image, I exported 2 sets of 50 identical images 50 with and 50 without the Metadata and ran a script which then automatically save the image, about 20 of the images with the metadata ended up corrupted, all the images without the metadata saved fine.
We are facing a strange problem in Corel Draw X4 and X3.First Corel Draw X4 corrupted its color pallet so that all colors were shown completely wrong.After that I tried to instal Corel Draw X3 which seemed to work ok. After a while when opening some older files, Corel corrupts these files. After I have opened them they are completelty empty and the file size is something like 10kb.
View 11 Replies View RelatedFrom time to time when saving a file the file gets corrupted. When trying to open the file, only a blank page is visible. Trying to open the file as zip says "error in packed file..." This happens several times a day (we are 5 users and this happens to everyone).
The out of memory issue is also a huge problem for us. This happens several times a day, often during printing.
Are Corel taking these issues seriously or don't you care about professional users which are dependent on reliable tools?
3 users at Win7-64, 2 at XP-32. All computers are top notch with all patches/updates installed.
I was trying to create a simple slideshow with sound when first my computer warned of low memory (something that doesn't seem plausible), and then Photoshop Elements 9 and the associated organizer crashed. When I brought it back, several photos were "grayed out" and my organizer is completely frozen. The error suggests that there are corrupt files. I tried to follow the instructions on the website, but cannot find any sort of Catalog menu or means of changing anything in the catalog or organizer as indicated in the troubleshooting and restoration instructions.
View 1 Replies View RelatedEvery single premiere cc project file I have including my auto-save prj files will not load. I get the error message "The Project Appears to be Damaged, it can not be opened". This is for all my Premiere CC Projects. I have uninstalled and reinstalled Premiere with no avail. Is there anything I can do in order to salvage these corrupt files and the work/effort associated with them?
View 32 Replies View RelatedIn my AutoCAD 2014, after selecting a grip on an object or a point it will snap to other grip points even when osnap is turned off. Is there a command or variable to turn what appears to be an auto grip snap function off?
View 8 Replies View Related