AutoCAD LT :: Unable To Save Files / Creating TMP Files Instead 2014

Apr 17, 2013

I have just recently installed AutoCAD LT 2014 on Windows 7 (Running on an intel iMac through Bootcamp). Ever since then i am receiving notifications when performing a save.

AutoCAD is telling me it cannot perform the save and is creating a .tmp file in the same location on the server as the file should be.

this is causing major performance issues and happens almost every second time I attempt to perform a save. The issue is that we are getting multiple versions of the same file duplicating on the file server which is very quickly going to cause capacity issues considering most files are 2-4mb in size.

View 5 Replies


ADVERTISEMENT

GIMP :: Doesn't Save TIFF Files On EXIF (2014)

Jan 6, 2014

it is a lot of time that I noted that if I convert a RAW file from my Canon camera in TIFF and then I post elaborate it with GIMP, I obtain a file without EXIF. No problem whan I convert the RAW file in jpeg.

note for instance this jpeg file obtained from a TIFF file with GIMP: [URL]

View 5 Replies View Related

AutoCAD 2013 :: Unable To Save Files

Jul 6, 2012

I am using 50 AutoCAD Network License and all data is on server not on local PC. When i try to save drawing it say's unable to save. Only save as is working that also i have to give different name for the file to save.

All other software's (Like Word, Excel etc.) are fine with saving data files on the same server's. Is there any Autocad variable to be changed.

View 9 Replies View Related

AutoCAD LT :: Automatic Save Is Not Creating Temp Files

May 7, 2013

AutoCAD LT 2012...I have set up automatic file saving to save files every 10 minutes but files are not saved. I have deleted most old files from the "temp" folder thinking it may be full but the save function is still not working. Sometimes drawings do get saved but only at random intervals and definitely not every 10 minutes.

View 1 Replies View Related

AutoCAD Civil 3D :: Automatic Save Is Not Creating Temp Files

Nov 13, 2012

I have my automatic save turned on and set to 10 mins.  I can visual see Civil automatically saving (as I have to wait a few seconds for the process) but it is not creating the temporary files. 

I used to work fine, and I can see the last file that was created - a couple of weeks ago, but now it has just decided to stop creating these temporary files.It really makes this option useless if there is no temp file to get my lost information from when I crash. 

View 9 Replies View Related

AutoCAD LT :: 2013 Unable To Save Files For Older Versions?

May 24, 2012

I have a newly downloaded version of AutoCAD LT 2013 that will not save files in older formats for autocad 2004 and 2007. When trying to save the user gets the following error message "One or more objects in the drawing cannot be saved to the specified format. The operation was not completed and no file was created."

I did some searching in the discussion groups and it appears that this is a known/common issue with autcad lt 2013. Is there a work around to saving it in a format that older autocad applications can view?

View 2 Replies View Related

AutoCAD 2013 :: Unable To Save R12 DXF Files To Network Drive

Apr 22, 2013

I have some AutoCAD 2013 users in our Fabrication department who are having problems saving R12 dxf files to a network location.  When they try to save they get a message that states "Unable to save to drawing N:Bend|5130Xfilename.dxf. Drawing saved to N:Bend|5130Xsav6A0D.tmp" (See attachment for actual message)

The temp file does not get saved either.  They can save R12 dxf files locally and to other network locations.  They are able to save 2013 dwg and dxf files with no issues.  This problem just affects R12 dxf files which they need for programming pressbrakes.

They can save to 2013 dxf files and then overwrite with R12.  After that they cannot save again and get the message again.

User workstations vary.

All are Dell Precision workstations and laptops

Windows 7 x64 with 16 GB of RAM

All are running Nvidia Quadro graphics cards with certified drivers

View 3 Replies View Related

Photoshop :: Unable To Save Files As JPG / BMP

Dec 20, 2012

The option to save a file as .jpg or .bmp no longer shows in my pull down menu following a reinstall after a crash. 

View 10 Replies View Related

Illustrator :: Unable To Save Files As PDF With CS5 AI

Mar 4, 2014

What do I need to do to be able to once again save files as pdf with out freezing up AI

View 4 Replies View Related

Photoshop :: Unable To Save TGA And GIF Files With Layers

Apr 9, 2012

I'm using Photoshop CS5 for Mac, and when I try to save files as TGA or GIF, the Layers option is not available and the result is a flattened, single layer.
 
• Files I am working with are 8bit RGB. 
• Photoshop is set to 32bit, not 64bit. 
• There are no extra channels other than RGB. 
• Switching files to indexed color doesn't work because it asks to merge all layers. 
• I can open Gif files containing layers, but I can't then Save or Save As with layers.
 
Below is the save dialog box as it appears when i try to save a Gif or TGA.

View 3 Replies View Related

Paint Shop Pro :: Unable To Save Files

Sep 18, 2013

Paint shop pro 4. Patches up to date. I am unable to save files my files as .jpgs. I can save them as .psp files however. I was able to save them last week, so something has changed in my settings, but where to look. 10 years using PSP and I have to say...dislike all versions after PSP XI.

View 2 Replies View Related

Maya :: 2012 Unable To Save Files

Jun 14, 2011

I have down loaded the program (Maya 2012 Student Version ) but most of the time when I click on some icons, I got the message as follows: " The file being saved was created by a Student Version of Maya intended for personal learning only. If you save the file, this message will always appear whenever the file is opened.”since I am not saving the files, I am just clicking some icons, I don't know why I got this message. It makes me so inconvenient to use this program because I got this Pop up screen almost every 10 seconds though.

View 3 Replies View Related

Paint Shop Pro :: Unable To Save PNG Files At 300dpi

Oct 29, 2011

I have a .psp image file that the information shows the resolution as 300dpi. When I try to save it as a .png file, the resolution changes to 118dpi. It doesn't matter if I just do a Save As or File > Save for Office > Professional Printing with 300dpi, the outcome is the same.

View 14 Replies View Related

GIMP :: Unable To Save All Files Due To Disk Error

Jun 16, 2012

I've been using Gimp 2.6 for some months now and beginning to get to grips with it. I load photos into Picasa and then process jpegs with Gimp. Upgraded to 2.8.0 a few days ago and hit a problem.

Using the new 2.8 system to to 'export' out to a jpeg file, when I go back to Picasa and make any change at all, which then needs a 'save' I get a Windows error message: "Unable to save all files due to a disk error. The disk may be full or read only".Files not Gimp 2.8 processed are fine.

2.6 no problem - 2.8 problem. I don't think it will be Gimp bug, but there is an associated change which has 'upset' my computer.

View 5 Replies View Related

Photoshop :: Unable To Save Files In Original Folder - Disappears?

Mar 15, 2012

At random moments when I'm saving layered Photoshop CS5 files, a message pops up with the following text: Could not save "...FileName..." because the file is locked or you do not have the necessary access privileges. Use the 'Properties' command in the Windows Explorer to unlock the file.
 
Well the strange thing is that I'm the administrator, the only user of this PC and even when I set/check the properties of the folder containing the files this continues to happen. What is even more disturbing is that I have to save my file as a new file in a new location and when I check the original file, it is no longer in it's original folder.
 
I save all my files to the local HD and I use an external device to backup my files. I regularly get notices on my backup device telling me that various files were deleted, but will be kept until I need the room. These are files which I did not delete, they are files which I'm still working on.
 
I'm having to save to the original job folder first, save to the desktop when I get the notice saying I can't save, and then save back into the original folder when I can't save on the desktop anymore because of the same error message. I sometimes get a similar Adobe error message which is basically along the same lines, but I haven't noted the exact text yet.
 
I no longer run my back up continuously while I'm working because while it's great to have the peace of mind that I'm regularly backed up, my files can get up to 2GB in size and I think the backup running at the same time is slowing Photoshop processes down, so I most often pause it until I take a break. On this occasion, I had been running it while working (smaller file) and so I was able to retrieve an earlier version from my backup which saved me from having to re-do the job completely. I didn't get this problem when I was using CS5 on Vista, it's been since I've been using Windows7 and my back up drive.
 
I only recall having had this problem with PSDs, but that could just be because these files can take up to ten hours to complete and there's a higher chance of getting an error message over a longer period of time.
  
I'll disconnect my back up drive while I'm working and see how it goes. It's not ideal, but probably worth a try.I don't know if there's a connection, but occasionally windows randomly sticks a lock on zipped folders which I create, regardless of the permissions I apply to the upper level folder they sit in.  I'm told by a friend that it won't affect other people accessing these zipped folders from other machines. I don't know if that's the case, I always change the zipped folder's permission to include 'Users' and that makes the lock disappear.
 
DELL XPS 730X
Total amount of system memory 6.00 GB RAM
System type 64-bit operating system
Number of processor cores 4
 
[code]...

View 2 Replies View Related

Photoshop :: Unable To Open Files Or Create New Files In CC Trial

Oct 15, 2013

After getting no support from your phone support line. I am writing here in hopes that this issue can be resolved. I cannot open files or create new files in Photoshop CC trial.

View 3 Replies View Related

AutoCAD 2010 :: 2014 DWG Files In 2011

Dec 9, 2013

Our structural firm is using 2011, and our office has received drawings that came out of 2014 twice in the past week (from separate arch clients). In both instances, we back-converted using DWG TrueView 2014, but upon opening in ACAD, none of the walls were showing up (although they do appear in the preview). One of my other drafters dealt with it the first time, and got it resolved, although I didn't get specifics on how. Naturally, the second time it happened, she was out, so I am seeing if the architect can back-save to 2010 on their end and send the file.

While waiting on that, I tried QSelect in the offending file, and in the list of items that comes up, there was, amid the usual Text, Line, Pline, Block, etc., something called ACAD_PROXY_ENTITY. I selected all (nothing was visible, however--usually you see grips at least when you QSelect things), then exploded, and the walls showed up.

I have had somewhat similar odd behavior from drawings coming from I think ADT (do they still make ADT?), where things like walls, doors and windows come in as something block-like (I think AEC OBJECTS?), and we have to explode them in order to control color and visibility of their constituent parts. Perhaps this is something similar?

At any rate, this seems like something that either shouldn't be happening, or that has a more obvious fix than having to qselect and explode invisible things to get them to show up.

View 2 Replies View Related

AutoCAD Inventor :: How To Export SAT Files V.6.0 From 2014

Apr 26, 2013

How to export SAT files v.6.0 from 2014 

View 4 Replies View Related

AutoCAD 2013 :: Can 2014 Import Ipt Files

Oct 10, 2013

can autocad 2014 import inventor ipt files?

View 3 Replies View Related

AutoCAD 2013 :: How To Open Two Or More Files In 2014

Jul 8, 2013

to open two or more files in autocad 2014

becomes very slow to use?

zooming is slow?

why this happens?

View 7 Replies View Related

AutoCAD 2013 :: SID Files Showing Up Corrupt In 2014?

May 2, 2013

I had a file which, opened with Civil 3D 2013, worked fine, but one of the SID images disappeared and was shown as "corrupt" in the same drawing opened in Civil 3D 2014.

The problem was that the file name contained a character in a font not recognized by R2014. (The file name was G1105001_095-ps 12_5æ.sid) Once I renamed the file and re-attached it in 2014 it worked fine. 2013 processes this font type with no problem.

View 2 Replies View Related

AutoCAD LT :: 2014 - Reading Earlier (2010) Files

Jul 2, 2013

Can Autocad LT 2014 read Autocad LT 2010 files?

View 3 Replies View Related

AutoCAD Inventor :: Can 2013 Files Be Opened In 2014

Oct 31, 2013

 I made these bunch of other parts at school this time and they use 2013 and I use 2014 at home, will I be able to open them

View 2 Replies View Related

AutoCAD Inventor :: Opening 2014 Files With 2013?

Sep 19, 2013

One of our customer has inventor 2013 and I am working with inventor 2014.

I would like to know if there is anyway for my customer once my job is done to be able to load the Sub assembly with his software and be able to work with it ?

They told me Inventor fusion is not an easy tool and would prefered to use inventor files.

View 9 Replies View Related

AutoCAD Inventor :: Opening Files With 2014 As Default?

Jul 17, 2013

I am having an odd issue with the windows default for opening files for Inventor.  I previously had the full Autodesk 2013 software suite.  A couple of months ago I did the upgrade and installed the Autodesk 2014 software suite. 

My issue is now when attempting to open files the default is to open them in Inventor 2013 (still installed on my machine). 

I went through the windows default programs options and browsed/selected the Inventor 2014 .exe application.  However, this does not add the 2014 application to the list as it seems 2013 over rides it. 

I tried to manually changing .ipt/.iam/.stp etc. file types from Inventor 2013 to Inventor 2014, yet am still unable to have the 2014 application added to the potential list of default programs to open with.

One solution would appear to be to un-install the 2013 suite, is there any other way to fix this problem?  It is nothing crucial, yet very annoying.

another way that I can get the default program altered to use Inventor 2014?  I have attached pictures showing my steps of attemping to change the file association for a .stp file.  However, this does not work.  I even brought this issue to my company's IT perssonnel and they were unsure. 

View 8 Replies View Related

AutoCAD 2013 :: Opened Files Becoming Read Only In 2014

Aug 27, 2013

My team is using AutoCAD 2014 and multiple people have noticed that while they're working, when they try to save the file it pops up a message saying the file is read only.

Multiple people on our team has had this issue and it only started recently. (We've had it installed a few months now).Could it be the new file tabs feature in 2014?

View 9 Replies View Related

AutoCAD Inventor :: Checking BIM Files Created In 2014

Aug 8, 2013

we are a large manufacturing organisation and currently are using Inventor 2014 for our product design and day to day production drawing. We purchased Inventor 2014 recently for its BIM transfer capabilities. It would appear however that we can only view the outcome of the transferred files fron Inventor within Revit its self.

 As we do not require Revit for any production work, purchasing a Revit licence is not an option. I recently downloaded the trial version of Revit Architecture to review the transfer files but the trial licence is now ready to expire.

View 3 Replies View Related

AutoCAD 2013 :: Reading And Writing 2010 Files In 2014?

Dec 3, 2013

I have drawings that are saved as ACad 2010 and need to work on them in ACad 2014.  I am receiving error messages saying the drawing is damaged and requires recovery.  Errors are being detected and some files I can eventually open but edits are missing.  Others I am unable to open and I get a message "audit could not correct errors in database".

View 3 Replies View Related

AutoCAD 2013 :: 2014 - Linetypes When Plotting PDF Files Are Always Continuous

Jun 6, 2013

When plotting with plot styles the "use object linetype" setting in the plot style table is not working when i plot a pdf file. All the lines appear as continuous. I am unable to plot hidden, phantom, ect lines. Changing global scale has no effect.

View 6 Replies View Related

AutoCAD Inventor :: 2013 To 2014 Migration - Missing Files

Oct 28, 2013

We've finally nibbled the bullet and upgraded to 2014.  I'm getting errors in the Task Scheduler logs about missing files in various projects.  It would appear that (almost) without exception, the failed files are all Content Center parts that were inserted as custom parts.  Do I need to run a migration on the Content Center parts (Inventor/ContentCenter Files/R2013/en-US) in order for the custom parts to migrate properly?

View 9 Replies View Related

AutoCAD Map 3D :: Getting Multiple User / Custom Coordinate System Files (2014)?

Dec 18, 2013

If you create any custom coordinate systems in 2014 products (Civil3D, Map3D) *.CSD files are created in C:Users{user_name}AppDataLocalAutodeskUser Geospatial Coordinate Systems with the additional data in them.

My question is - can you have multiple 'coordsys.csd' files?

The reason for asking is that we are setting up a large number of low distortion projections that are specified by a government roading agency and I figure the best way to distribute these is to create a coordsys.csd with them and sync it out to everyones profile (the location shown above), but there could then be issues if a user then sets up some additional coordinate systems that will only be on their computer, if we altered or expanded the company definitions and sync'd these out again it would overwrite the users ones.

It would be good to be able to have mutilple custom coordinate system files - ones for particular clients, countries, individual users etc.

Civil3D 2014 - Windows7 64bit

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved