In LR 3 I had the option to select Leica in the lens profile and then select from a short list of available lenses to correct the image.In LR 4.3 I can not find Leica anymore in the pull down menu and therefore I can not select any lens profiles to use as corrections.
Where can I find the missing camera manufacturer files and profiles for Leica?How can I load the missing profiles into LR 4.3.
Can 'Enable Profile Corrections' in Lens Corrections be checked as a default?
View 2 Replies View RelatedUnder Linear Curve, I do not have the "channel choice" option in LR4.4. (I just upgraded)
Also, I seem to be missing "Enable Profile Corrections" from Lens Corrections.
I use Lightroom 3.6. The "lens profile corrections" does not have my lens in the drop-down menu. Is there a way other than using the Adobe Lens Profile Creator Tool to create this profile? The lens is the Nikon AF-S DX NIkkor 18-105mm F3.5-5.6 G ED VR, and I use the Nikon D90 dslr. I only shoot JPEGs.
View 1 Replies View RelatedAll of a sudden, nearly all profiles have disappeared. I first noticed this with my Sony RX1, when I went to apply the profile correction, and there was nothing. Usually the program identified the camera automatically. When I looked at old pictures, it was the same, nearly. If I used "custom" then it would give me only Nikon and/or Sony, but only one lens for each camera, not relevant to what I had used to take the photograph. For some pictures it would recognize the lens, but it would not give me options to change it (if I wanted to).
View 5 Replies View RelatedI would like to inform all about an (in my view) incorrect behaviour of LR:
In order to speed up my workflow i disable detail and lens corrections for all images immediately after the import (select all, auto sync is on, turn off detail and lens corrections). With this panels turned off I can do basic operations like cropping etc much, much quickier. I shoot badminton sport and have to process hundreds of images.After the basic corrections I re-enable detail and lens corrections for all images which should restore the previous settings of this panels or at least the default (ISO specific) settings (which is the same in my case). But the "Remove Chromatic Aberrations" remains off, even if it was on before and on by default for all my lenses! I consider this to be a bug.
In the Lens Corrections Tab, below the checkbox "Enable Profile Corrections" there is a drop-down menu to choose a setup option (Default/Auto/Custom).Unfortunately I cannot find any information on what the difference between these options is and hence when to choose which of these options.
It seems to make no difference whatever option I choose.
I keep hearing conflicting reports about how Lightroom handles lens corrections for the Fuji X100s. Some say you need to use the X100 profile while others say that Lightroom applies the corrections automatically, behind the scenes, based on info embedded in the raw file itself and that selecting the X100 profile would only "double up" on the corrections. Others have said that there is no X100s profile yet but NOT to use the X100 profile because it might make things worse since the sensor has changed and the new X-Trans sensor and lens combination would likely need different corrections than the old one.
View 36 Replies View RelatedI use mostly .tiff files in LightRoom since my camera isn't supported by LR.In previous versions of LR (including 4.2) i opened each lensprofile i needed and changed:
stCamera:CameraRawProfile="True" to stCamera:CameraRawProfile="False"
In earlier versions i only changed the first appearance of the line above, but i have also tried to change all apearences in each file - but nothing happens, the lenses doesn't appear in the lens profile model list.
Which worked flawlessly until i updated to LR 4.3 ...
In the below print screen, the lens should be 70-200 f2.8, which normally is found. The only difference with this photo is that it was accidently shot as a JPG and not RAW. I dont see how that makes a difference since the metadata still lists the correct lens as you can see on the screenshot:
The lens profile defaulted to "None". And you can see the dropdown I need to use when this happens. When I select "Nikon", the profile is USUALLY then enabled, but not always.
This has stopped working in the past for unknown reasons. If I "enable" a whole day of photos from multiple lenses and bodies --that is when it is mostly likely to fail (even though these lenses all have profiles). Perhaps a better question is how does the lookup logic work in the first place? I tend to take it on faith when a product's features work until I'm forced to figure it out. In "Setup" I don't know what the various options do. Normally it just works. I do not know the difference between "default" "auto" and "custom" nor do I know the function of "Save" and "Reset".
I have been using LR since it has been released in version one. I have a very modest system, Win 7 64 bit Home premium, Processor 6.6 GHz; Memory 4GB; Displaty 1680x1050.Test on export of 101 raw files from Panasonic G3 Lightroom time for rendering 15 Min approx 9 seconds per file.Export from After Shot Pro Approx 3 Min 1.87 sec per file.Both systems using only standard processing functions no Lens corrections, adjustment brush etc. just standard corrections.Just unbeliavable. I did not think I have an issue with the performance of Lghtroom but this is a revelation. I have no hangups or crashes etc.
View 4 Replies View RelatedI often use a couple of lenses when I am out shooting. When I return I import all my photos into LR. I would like to apply LENS CORRECTION to all photos so I selected all the photos that I have imported (CNTL A) and then go to the lens correction area in the development panel. I then "ENABLE LENS CORRECTION" and SYNC the photos.
When I do this it applies the lens correction from the len used in shooting the first photo in the series of photos that I have selected. It DOES NOT recognise when I change lenses. HOWEVER, if I go to any specific individual photo and enable lens correction it does apply the correct lens profile.
WHY does the sync not recognize a change in lenses?
I'm using Lightroom 4, currently waiting to upgrade to 4.4. However, I'm having a problem not finding any of my lens profiles listed in the lens correction control panel. If I check the box, "Enable Profile Corrections" and then select from the "Lens Profile" dropdown menu, I get a list of only six available lens brands: Apple, Canon, Nikon, Sigma, Sony, and Tamron. This is odd, because when I view the package contents for the software under Package Contents > Contents > Plugins > Resources > Lens Profiles - ALL the lenses that I use (Pentax) ARE listed there. Why then will they not show up in the interface of the actual software when running?
View 2 Replies View RelatedWindows 7
Lightroom 4.0
Existing gallery
Is it possible/how would I apply Lens profile correction to all the photos in the gallery?
I was just looking through some images and I realized that somehow I have managed to apply lens corrections to exported jpeg and tiff files. These are images that I exported from raw to tiff to jpg through Photoshop and what I think happened was that I didn't notice that Lens Corrections were being applied when I reimported the tiff back into Lightroom. Of course, the lens correction was applied when I developed the raw and made the tiff in Photoshop (or JPEG when I exported thru Lightroom), so a second correction just distorts the image.
is there some mechanism in Lightroom that keeps you from shooting yourself in the foot this way?
One of the great features of the Sony NEX-7 is that the NEX-7 makes automatic lens corrections for vignetting, chromatic aberration and distortion problems. These corrections are written to the file and the preview. However, when converting these images from ARW to DNG the correction data seems to be lost, and the images revert to their uncorrected state. This requires all images to then be re corrected with the Adobe lens profiles, which is both tedious, an extra step, and also seems to produce results that are somewhat less optimal than the original corrections made by the camera.
Should not the ACR Converter and Lightroom retain the lens corrections made by the camera?
The chromatic aberration check box that should be present under lens corrections is missing from my LR4 program, how to get it back
View 6 Replies View RelatedI have created default settings by serial number for my Canon Mark III 1ds which include enabled lens profile corrections. I then created a user preset with these default corrections. Next I imported a folder of RAW images shot with this same Canon camera with the user profile checked as part of the import. When I switch to the Develop module and check the Lens Corrections panel, I see that although it is checked for each file, the actual make, model and profile are not populated.
Is this a bug or am I overlooking something on import? I understand that in LR 4, you can apply specific lens and camera calibration profiles to camera serial numbers (noise reduction etc too).
MacPro 2.8 Ghz Quad-Core Intel Xeon with 16 gigs of ram running OSX 10.7.2.
Can Photoshop CS6 (Windows 8) make lens corrections for the Canon PowerShot SX50 HS camera? My version of CS6 (64bit) is Photoshop: 13.0.1 x64 and CameraRaw plug-in is 7.3.0.71. There is a file "Canon PowerShot SX50 HS AdobeStandard.dcp" size 118KB in the folder c:Program DataAdobeCameraRawCameraProfilesAdobeStandard.However when I open a Cameras Raw file (*.CR2 for Canon) in Camera Raw and go to the Lens Corrections window with (under Lens Profile) Make = Canon I cannot find my camera in the drop-down list for Model. The list has 30 items ending with Canon PowerShot S100.
I have tried removing Photoshop, re-installing it and installing the updates, but this has made no change. I have been using Photoshop under Windows 8 since early in October 2012, and everthing else seems to be operating correctly.
Using Lightroom to shoot tethered to a Leica M9?how to do it?
View 7 Replies View RelatedIf not supported for LR3, would it be available for LR4?Right now, I am using Aperture for all of my tethered capture, then importing to LR3.
View 4 Replies View RelatedI'm using LR to process DNG files from Leica M 240.
I understand LR has some extra profiles ( "Camera Faithful, Camera Portrait, etc" ) for some Canon and Nikon camera models.
As under "Camera Calibration -> Profile" I can only see "Embedded" or "Adobe Standard", does it mean these extra profiles don't exist for Leica M 240?
I can't find my lens in the Lens Correction menu. Is there a way to add it?
View 2 Replies View RelatedUsing LR 3.5.1. When applying Lens Corrections/Profile/Enable in Default, my Sigma 10-20mm f/4-5.6 actual lens is being corrected by the profile for a Sigma 10-20mm f/3.5 lens. I can tell it's the wrong correction because the barrel distortion after using the default profile is not corrected, and when I manually select the 4-5.6 lens the correction is perfect. So I know the right data is embedded in the LR correction data bank but is not being used.
I found that when I set the profile Setup selector to "Auto" the correct lens is selected and the correction it makes is "correct." But then moving to the next photo it switches to Default again, selecting the wrong lens, and so has to be set to Auto for each photo. This action doesn't seem to me to me an expected result called "Setup." I need this for my home interior photography, and with hundreds of photos a week I don't want to manually operate this. This didn't happen until v.3.4 or 3.5, I think.
So, how do I get it to select the right lens as the Default, or get the Auto setting to stick? Either would do. (Seems to me they logically are the same thing).
In addition, why isn't it possible to have the profile itself enabled as a default perhaps in a preset - or is that possible and I don't know how to do it? In other words, once it's working right, why not make it an import preset for that lens?
I'm trying out the new Sigma 24-105 DG lens with my 5D M II. The lens profile is not yet in the list of Sigma lenses. I checked and my LR is up to date with the latest version 5.3. Is there a way to find the lens profile to import for LR lens correction function? Or do I just need to wait until LR updates for new lenses?
View 5 Replies View RelatedIn LR 4.4 lens correction profiles works fine for my Canon 70-200 f/4L IS USM, but when I use the Canon Extender 1.4 III with this lens there is no correction profile available.How do I obtain a profile covering this?
View 3 Replies View RelatedI'm a Sony user and installed the Lightroom 4 trial. It imported the old 3.6 catalog and gave me a nice new Lightroom 4 catalog. So far so good. Everything looked normal.
Now, when I import new .ARW (Sony Raw) pics into LR4, I'm not getting the lens information correctly. I use a tool call 'alphalensinfo' that reads .ARW files and creates .XMP files with the correct lens name. LR3.6 used to import the pics and read the XMP, giving a correct lens name in the LR catalog. LR4 seems to fail at this.
For instance, with my Samyang 8mm, Alphalensinfo would add the exif field to the XMP file saying "Samyang 8mm". LR3.6 then shows "Samyang 8mm" for the lens, after import. LR4 shows "---" for the lens.
Has something changed in the way LR 4 handles Lens EXIF information?
How or where can I get the lens correction profile for the Canon 18-135 STM lens in Lightroom 5 ? In effect he is not available in my list of correction lens so my lightroom is up to date apparently.
View 2 Replies View RelatedIs there a lens profile for Nikon 18-300mm lens?
View 1 Replies View RelatedI have two versions of the sony 70-400 ssm lens versions I and II. Both lenses are identified as 70-400 SSM. However if I examine the exif data in the xml sidecar for photos taken with these two lenses they have different lens IDs 53 for the first version (70-400mm f/4-5.6 G SSM) of the lens and 69 for the newer version II (70-400mm f/4-5.6 G SSM II). How can I get lightroom to recognize these two lenses with different names.
View 1 Replies View RelatedHow or where can I get the lens correction profile for the new Canon STM lenses?
View 5 Replies View Related