AutoCAD Civil 3D :: Volume Table Display In Viewport Is Staked?
Jun 22, 2012
about a Volume Table style, where I have correctly showing in Model Space and is "Split" in the Table Properties. This is a "Total Volume Table" and is Dynamic.
Just Fine in Model Space... yet is showing within a Viewport (typ. plan sheet) that each Split is simply Staked ontop of each other ?
Thought I (we) came across this a few years ago... yet no issues latetly till now, and also mainly first time I've likely split the Table in R2012 (currently used).
Have maintaining View Orientation "true", yet still nothing.....
Xi Computer (Win7 64bit O.S.)
i7 3770K @ 4.5GHz Sealed Water Cooler
Quad Core w/ Asus P8Z77-V LE mobo
16GB DDR3 @ 1600Mhz RAM
15K Seagate SCSI H.D.
Nvidia Quadro 2000 (span2) + FX4600 (3)
ViewSonic VS2436 series displays (3)
View 4 Replies
ADVERTISEMENT
Apr 19, 2012
I am using C3D 2012 and i know how to create a table showing volumes for different elevation ranges with different colours, but how to show the total cut or fill for the volume surface in the same table so that you dont have to manually add up all of the cuts or fills? or have to display only two ranges?
View 1 Replies
View Related
Nov 20, 2012
Attached are two files: 1 file has 0 values on the volume table, and the other file has Sample line group Properties.
Surface 3 is the surface that has the existing actual survey points . Do I have to pick another surface : the other two are the surfaces I created in the Corridor as surface boundaries , Top and Datum
View 1 Replies
View Related
Dec 12, 2007
How to get the Volume Elevation Table masking to work?
I can only get the Title to work correctly - everything else plots as a black blob if Fill is on. With Fill off - there is no mask.
View 1 Replies
View Related
Sep 18, 2012
How to calculate in a table the volume of cut and fill between the stations, The horizontal and vertical alignments are generated along with their sections. I’m wondering if there is a tool that summarize the volume of cut and fill between the stations in a table.
View 3 Replies
View Related
May 12, 2013
I have just created a Total Volume Table and everything is perfect in Model, but when y change to layout, the table is miising. I can barely see the title of the table zooming, but anything else. The tables are still there, but so tiny and with just the title, there is no data!
View 1 Replies
View Related
Jun 3, 2013
I have a couple of questions regarding surface volumes/analysis in Civil 3D 2014. First, there used to be a way to determine the volume between two surfaces without creating a volume surface. The command is _AeccReportSurfaceVolume, but I can't find it on the ribbons in 2014 to save my life. Do I need to create a new button myself?
Second, and more important, dealing with the elevation analysis in 2014, and noticed that the colors reset anytime that the volume surface is rebuilt? It has always been annoying not to save a color scheme, but at least once you had set it up, the colors stayed as the surface changed. Is there a new setting that I am missing, or is this just a glitch with 2014?
View 8 Replies
View Related
Jul 26, 2013
I have been asked to place volumes on cross sections with a certain look, that I am not sure if it is possible. For know I am just going to use text, but I would like to come up with a solution for our template and work flow. Below is an attached copy of a markup I have received asking me to show this information on the cross section similar to how he has written it. At this point I only know how to create the tables of to the side. Is it possible to dynamically show this information quickly like shown below? I have a feeling the engineers I work with will not be happy at all with a table off to the side. I am currently using 2013
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
View 9 Replies
View Related
Mar 5, 2013
(I'm using Civil 3D 2011)
I have a corridor with an associated sample line group, and I have produced some material volume tables to give me quantities for my corridor structures and cut/fill volumes. When I look at the material volume tables they are at a seemingly arbitrary stationing. The sample line group which the material volume tables are (supposedly) based on are on alignment L1000 and they run from station 1133+73 to station 1154+00 every 10 meters. The material volume tables show volumes broken down by stations starting at station 3719+58.66 and runs through to station 3786+08.92. It is sampling at a seemingly arbitrary frequency, there is absolutely no alignment in my drawing that has stations remotely resembling those numbers, and there is definitely no sample line group it could be using that samples an alignment or stationing anything like that shown in the materials volume tables. Here is a quick screenshot of what my material volumes tables look like:[URL]
View 2 Replies
View Related
Jul 31, 2013
Using the DAta Connections tool under Planning and Analysis, also known as Map 3D, I have attached a series of shapefiles and I want to be able to toggle the view of some of them on or off depending on the viewport. Is this possible to do?
View 5 Replies
View Related
Mar 11, 2013
Is there a way for me to display different points in each viewport? I have figured out how to freeze layers and realize I can put the points and labels on different layers but am curious if this is the only alternative?
View 2 Replies
View Related
Jun 12, 2013
I have an alignment that is line and curve tagged for a table. The last segment of the alignment is a 3 point curve. It shows up in the alignment grid view, and is tagged. When the table is produced the everthing comes in except the 3 point curve I mentioned.
View 1 Replies
View Related
Oct 2, 2012
Is there a way to generate a volume report for a bounded volume surface?
View 3 Replies
View Related
Jun 18, 2012
I'm working with TIN surfaces, doing cut/fill comparisons for a surface mine.
My volume surface statistics show a cut volume of 5167.22 cy and fill volume of 8456.18 cy.
The sample line group volume report show cumulative cut of 5527.67 cy and fill of 8465.56 cy.
What could be some causes of this disparity. All reference surfaces are built from points and use a non-destructive boundary.
View 2 Replies
View Related
May 31, 2013
I've read a few threads on this way back but cannot locate them. I have two surfaces and create a volume surface and it reported the volume as 493 cy. I then ran some sample lines at 25 foot interval and the total volume is reported as 964 cy.
View 1 Replies
View Related
Apr 24, 2013
I want to use it as my primary hydrologic and hydraulic modeler. It only makes sense. Well, I got the program to work and had things linked in and was able to route a storm through the network. But when I routed the storms, I had to model double the storage that i expected.
So I went back to the program I'm familiar with - Pondpack by Benltey - and designed the same system I routed in SSA in that program - and got the storage volume that I would expect for a site of this size - about 2 acres.
Is there possibly a setting that I'm missing that makes my outlet structures route slower or less than they should? Or is there some other reason that a system would give this kind of inflated need for storage?
View 9 Replies
View Related
Feb 25, 2013
I have an issue with using Bounded Volume or Adding a Boundary to Volume Surface things so bad... = incorrect volumes.. sometimes extremely incorrect.. I understand that the surface rectangle when a boundary is added but this could be horrible if not checked.
View 3 Replies
View Related
Nov 20, 2012
I am wanting to use an Autocad table object to display fields from an Access database table that is linked to symbols in my drawing.
My objective is create a database table that has detailed notes for call outs in my drawings and then link my call out blocks to the database table and display the blocks and linked descriptions in an Autocad table. If the notes in the database table are edited the Autocad table updates with the new the description from the database.
View 1 Replies
View Related
Apr 19, 2011
How to add a volume column to ipart author table?
Evantually I need to display a table with part weights.
Inventor Professional 2013
Vault Collaboration 2013
View 9 Replies
View Related
Jul 25, 2012
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies
View Related
Feb 23, 2012
Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
View 4 Replies
View Related
Feb 18, 2013
I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies
View Related
Apr 6, 2010
With standard CAD objects it is possible to control their display on a per viewport basis by using the layer manager and freezing any unwanted layers in a particular vport.
I'm having trouble controlling the display of FDO objects from an SDF file in the same way though.
View 9 Replies
View Related
May 30, 2012
Some view-port with excel table external reference does not appear when I print
View 1 Replies
View Related
Jul 12, 2012
I have a drawing with a viewport that fits to the page. And I created another smaller viewport over top that just shows the legend. Now when I try to double click inside the smaller viewport it always goes into the larger one. I have tried bringing the smaller one to the front but that didn't work. I know that I can clip the larger viewport around the smaller one or bring the legend right into paperspace or slid the smaller one off to the side work in it and slide it back. This is more out of curiosity of how to get into the smaller viewport.
View 2 Replies
View Related
Jun 21, 2012
Another user has created a bunch of sketches and somehow has set the drawing up where all the viewport and our title block are displayed in white. model space everything is fine and is as it should be.
View 5 Replies
View Related
Jun 3, 2013
I'm having an issue with viewports in a drawing not displaying the color of the objects in model space. All of the objects are set to display bylayer, and all of the viewport overrides in the drawing are off. Still, the objects will only display as either white or grey through the viewport, even though the colors show up fine in model space. I've also tried making a new viewport and it also displays everything as either white or gray, so I'm thinking it might be some kind of system variable that I don't know about.
View 2 Replies
View Related
Feb 15, 2013
I'm using iLogic to make simple parts. I don't want to make duplicate sizes. When a new size is created I add it's values into a spreadsheet. This is not at table driven part. I've also created some fancy excel searches to find sizes close to the current part. Ideally I want to display this close list in Inventor via a form or popup message. My thinking is we might find a size very close to our current need and not need to create a new size.
Originally this was a table driven part. We had to change it and make the parts individuals.
View 1 Replies
View Related
Dec 21, 2012
I have and array that looks fine in model space but when viewed in a viewport from paperspace, sections of the array look like they are wiped out. Going back to model space everything looks fine. The only way I can get it to fill in is to delete the viewport and create another one. It's then fine for awhile but before long, areas are missing again. I've redone the viewport three times and it's starting to drive me nuts.
View 5 Replies
View Related
Sep 7, 2012
How can I display the object data in a grid with vb.net and also add new features to the same layer along with the object data.
View 3 Replies
View Related
Jul 7, 2011
In ACA2008, can the display of each of the four edges of a cell in a table be controlled individually? I want left and right edges of cells to display, and top and bottom edges to not display. In the Cell Border Properties dialog box, I can set the Lineweight, Linetype, and Color of each edge, but I don't see how to set the visibility of each edge.
View 4 Replies
View Related
