AutoCAD Architecture :: When Print Viewport With Excel Table External Reference Does Not Appear
May 30, 2012Some view-port with excel table external reference does not appear when I print
View 1 Replies
ADVERTISEMENT
AutoCAD VB :: Add Table With External Reference
Mar 24, 2011I need to add table in acad as an external reference via ms excel.
View 2 Replies View RelatedAutoCAD 2010 :: Extract Some Info From Table To Reference File That Can Be Opened In MS Excel
Jun 15, 2013I've spent the last 4 hours searching for an answer to this question, but I simply can't find one.
As a start I think you have to know that I'm currently using AutoCAD 2012.
Here's the problem: I need to extract some info from an AutoCAD table to a reference file that can be opened in Microsoft Excel. Everything I find on the subject is actually an answer to the question "How does <DATAEXTRACTION> work?" or "How to do an extraction of DATA in AutoCAD?"....
In this particular case I have a set of production drawings (cut tickets) for manufacturing of stone. And in every single sheet I have this material schedule or a table, if you wish, that is made with an AutoCAD table. In this schedule I have the height, width and thickness of the stone plate and with a function it measures it's area and volume. What I want to do is to extract those values into a reference file that I can open with Microsoft Excel, as I already said.
How exactly?
AutoCAD Architecture :: External Reference - PDF Really Slow
Dec 8, 2010I am using a pdf file as an xref however while panning/zooming and some other basic commands, the response is really slow.I have already tried using a jpg file but I loose the ability to grab the end point of a line. I am able to grab the end point of a line while using the pdf.
I have 4 GB of ram and nothing else open, so I cannot see this being the problem
AutoCAD Architecture :: External Reference Doesn't Show?
Apr 8, 2012I am working with files that somebody else did, I need to bring an external reference and it dosen't show up, then I check on the ref command and seems like the external reference of that file is there, I check also on the layers and they are not off or frezze, what could be the problem?
View 2 Replies View RelatedAutoCAD Architecture :: Table From Data Link To Excel 2000 Cell Limit
May 5, 2011I struggled for a while this morning with trying to data link to a large door schedule in Excel. After several failures, I searched online for answers, and read in another forum that AutoCAD won't data link to more than 2000 cells.
My door schedule is about 2050 cells now, and will be about 4000 when done. I defined a set of about 1,000 cells in the Excel spreadsheet, and AutoCAD linked to it no problem. So, I tend to believe the poster who stated the 2000 cell limit, but I can't find this.
AutoCad :: Remove Excel Link But Keep Table (Embed Excel Table)
Feb 13, 2012We have a whole bunch of spreadsheets that we use for calculations and parts of those spreadsheets are linked to a ton of CAD Drawings via data links.
We would like to be able to deliver the CAD drawings to the client without having to send our calculation books (just the output tables). In other words, is it possible to embed the table data and remove the excel link for the final delivery?
AutoCAD Architecture :: Render To Viewport Print Takes Forever?
Dec 2, 2013I have a fairly simple 3D model in ACAD ARCH 2011. I am rendering it to a viewport on a layout that contains the company border / title block. If I render the model (presentation quality) to model space and send that to the printer (color laser) the print comes out in about 60 seconds or less. However, if I render the same image and quality to the viewport on the layout and send that to the printer, it takes between 10 and 15 minutes for the image to print. The layout is simple - just line workd border and title block. The images are identicla when finally printed.
Why does it take SOOOO much longer to print when with a layout as opposed to not with a layout? The rendering to screen takes the smae amount of time either way - it's just the printing procvess that is bogged down by using a layout.
AutoCAD 2010 :: Explode Excel Table But Keep Table-layout And Texts
Mar 14, 2013In our company, we put Excel tables in our drawings. The reason we've chosen for Excel-tables is that we can adjust the layout of the table quite easily. These tables consist of grouped cells in a particular company-specific layout. We select the range of the desired cells, copy and paste them in our AutoCAD drawing. This drawing is sent to our customers. The disadvantage of this method is, that when our customers (who use CAD-software of other brands) open the dwg, they don't see the table, but some kind of picture of the table.
Is there a way to 'explode' the excel-table, but keep the specific layout of the table? For attributes in blocks there's the 'Explode Attributes'-command in the Express-tools, but is there something similar for Excel-tables?
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
AutoCad :: Export Excel Table Not As OLE Object But As A Table?
Dec 13, 2013How can I export a excel table to Autocad not as an OLE object but as a Audocad table?
View 7 Replies View RelatedAutoCAD LT :: Insert External Reference
Jan 31, 2013I am using AutoCAD LT 2013. I always start my drawings at a common point 0,0,0. When I attach an external reference, I want the insertion point to be 0,0,0 so that my drawings overlap each other. However, when I attach, the drawing is 596'-10", 345'-11 1/4" every time! Am I missing a setting or extra step?
View 1 Replies View RelatedAutoCad :: Using Dynamic Block As External Reference
Dec 2, 2013Is there a possibility to use "Dynamic Blocks" as an "External Reference" having the ability to use their features at the same time?
The thing is I have dwg1 and dwg2 files and in them I use "Dynamic Block1". Whenever I update "Dynamic Block1" in one of the dwg files I have to go to "design center" and update the "Dynamic Block1" in other dwg file.
AutoCAD 2010 :: External Reference Layer Will Not Save
Oct 2, 2012I have a drawing that does not save the xref layer setting. I can change colors and thaw different layers but after saving and closing the drawing it reverts back to the original when opened again. I am sure this is a setting but can not find which setting.
View 2 Replies View RelatedAutoCad :: External Reference - Lock Up For 30 Seconds To 10 Minutes
Nov 1, 2012I am having an issue with an external reference. It is basically a 3D drawing of a few trusses with truss bracing installed. I include it with almost every set of drawings. Problem is it often causes my AutoCAD to lock up for 30 seconds to 10 minutes. The problem occurs when switching from paper space to model space or when I load the drawing file.
View 3 Replies View RelatedAutoCad :: Extract Bound External Reference To Its Own Drawing
Jun 4, 2013Is there a way.....
I have a drawing that has external references bound to it. I would like to extract the bound external reference to its own drawing. Can this be done?
AutoCad :: Editing Drawing - Exploding External Reference
Nov 28, 2007Im drawing on autocad 2008, but im having some trouble with trying to explode an 'external reference' this external reference needs to be edited.
I opened a DWT renamed it and saved it as a DWG, then i used the INSERT/EXTERNAL REFRENCES/ATTACH DWG to bring in drawing. When i select the explode button i cant select the drawing i need to edit.
AutoCAD LT :: Don't Get Option In External Reference To Attach Image
Feb 10, 2012I don't get the option in External reference to attach an image. Do I need to reinstall the program?
View 2 Replies View RelatedAutoCAD VB :: Extract Attribute Values From Block In External Reference?
Mar 23, 2013is it possible to extract attribute values from an block in an External Reference using VBA ?
View 5 Replies View RelatedAutoCAD 2010 :: How To Make External Reference File (DXF) Clearer
Jan 16, 2013I had a DXF file with an external reference file inside, when showing in AutoCAD 2012, the external file appeared very 'dull' and blurry. But when I look at the same file in the new AutoCAD 2013, it shows very clear.. this puzzles me, and our clients are complaining about this quite often.
Is there a setting I can change in 2012 version to make it (external file) clearer? The right hand side shows the external file (table and words) much better than the left.
AutoCad :: Make External Referenced Image Into Relative Reference
Dec 21, 2011In AutoCad 2012 how do you make a hard coded externally referenced image into a relative reference? I tried simply removing the trailing path locations from the found at location in the external references manager although that wouldn't let me do it.
View 2 Replies View RelatedAutoCAD Print / Plot :: Batch Print With Excel
Dec 11, 2012Here are my current steps for getting prints to shop floor;
1. download a list of drawings required from as/400 into Excel.
2. saveas .csv file
3. print mfg labels using label program reading .csv file
4. using labels, open .dwg from ACAD one at a time and print ea
5. apply labels to prints
6. give to mfg
I want to do this;
1. download a list of drawings required from as/400 into Excel
2. run macro to concanteate file location, name and .dwg to new column
3. run macro to print each drawing either from Excel or Acad - not sure which is better;
- Each drawing will have all label data incorporated in the drawing
- currently nothing is in the drawing for label data, I'll need to create it.
- should I insert a block that updates with the excel row data
4. give to mfg
My first goal is to be able to batch print with the same list that I use to create the labels, then I'll focus on getting the label data incorporated on the drawing.
AutoCAD Inventor :: Reference Dimensions In IPart Table
Aug 14, 2011The question I want to ask is about reference dimensions in iPart.
I can create a sketch and place reference dimensions on it, there's no problem. I can activate any configuration manually and see the reference dimensions adjusted according to configuration, no problem again.
I would like to know — is it possible to automatically populate column of the iPart table with reference dimension value, as it stands for each configuration?
I was able to find some solution for that, but it's not automatic. I can mark reference dimension of export, and add it as a column to the table, but I need to manually activate each configuration to populate the column with measured reference value. Not very good, because there can be very many configurations.
How to automatically get complete list of reference dimensions values for each configuration of the iPart?
AutoCad :: Importing Excel Table Into (OLE)?
Jul 31, 2007I'm trying to import an excel table into autocad. I can copy paste using ole and that works fine. It prints well, but when I print it as a PDF the file is not legible.
View 4 Replies View RelatedAutoCad :: How To Export A Table To Excel
Mar 18, 2012I want to export a table to excel but i am failed.and is here any way that when i give coordinate it automatically exportes to excel.
View 2 Replies View RelatedAutoCAD Map 3D :: External Database To SHP Files OD Table
Oct 25, 2011I have shp files and an external database file and I wish to merge the data from the External database to the Shp files OD table.They both have a column with entries matching so I figured I could use a Join to complete this. This is where I have run into difficulties.
I tried to import the spreadsheet using FDO but there is no XYZ data its just pure data. I added dummy XYZ data and tried again but I am unable to insert the data. the checkbox is greyed out, I select the Identity property to match the main title and it does not work.
I tried adding a new data source but I am unable to perform a join with this. right way to import the data from the excel sheet and add / merge the data to the FDO table created by the shp file.
AutoCAD Civil 3D :: Remove Excel Data Links From Reference Manager?
Jun 26, 2013I am using Rel 2013 C3D
How do I remove excel data links from my Reference Manager (see attached image). What I have been doing is AutoCad erasing the graphics from my drawing but the link still remains in the xref manager window.
AutoCAD Inventor :: Import IProperties Value From External Excel File
Dec 14, 2011i have made a iLogic Module who, whit an external rules, import the iProperties value from an external exel file.The exel file is connected from SQL with the our managerial software.This in the external rule:
i = GoExcel.FindRow("Z:DISEGNI_INVENTORDescrizioni.xls", "Descrizioni", "Cod.Art.", "=", iProperties.Value ("Project", "Part Number"))iProperties.Value ("Project", "Description") = GoExcel.CurrentRowValue("Descr. Articolo Princ.")'iProperties.Value("Project", "Project")
[Code] .....
It's work fine but i have same question. There is some string to refresh an iLogic Module? When i push the ruel button the rule add the custom value in iProperties, but there are disabled, i have close the module an reopen it for correct display the value of the iProperties.
this module work with single parts. Can I do an rule who do the same thing of my string but in one assembly, do this for every parts of assembly automaticly??
AutoCAD 2010 :: Imported Excel Table
Apr 3, 2012I have a table imported into autocad from excel, however despite the table (excel) being formatted, border lines appropriately placed and hidden througout the sheet, all off the border lines of the cells appear when imported into autocad.
is there anything i can do to hide back some border lines for selected cells?
AutoCAD Civil 3D :: Pipes Table In Excel?
May 22, 2006I have a number of tables which have all properties about the pipe network with the cooridnates and upstream/ downstream info. Can it import to C3D and automatically generate the pipe to 3D?
View 9 Replies View RelatedAutoCad :: How To Export Table With Some Fields To Excel
Feb 24, 2012I have a table with some Field, how can I export it to Excel? I have tried to export it to .CSV but the Formula has gone .
View 9 Replies View RelatedAutoCAD 2010 :: Launching Excel From OLE Table
Oct 13, 2012I use an embedded excel file I a lot of my drawings. 90% of the time a double click opens excel for editing with no problem. But every so often I get a stubborn one that just will not open. It will select and the quick properties box will appear and then the properties box, but nor firing up of Excel. Usually if I am persistent I can get it to work, but I have one right now that is more stubborn than I am.
View 2 Replies View Related
