AutoCAD VB :: Add Table With External Reference
Mar 24, 2011I need to add table in acad as an external reference via ms excel.
View 2 Replies
ADVERTISEMENT
AutoCAD Architecture :: When Print Viewport With Excel Table External Reference Does Not Appear
May 30, 2012Some view-port with excel table external reference does not appear when I print
View 1 Replies View RelatedAutoCAD LT :: Insert External Reference
Jan 31, 2013I am using AutoCAD LT 2013. I always start my drawings at a common point 0,0,0. When I attach an external reference, I want the insertion point to be 0,0,0 so that my drawings overlap each other. However, when I attach, the drawing is 596'-10", 345'-11 1/4" every time! Am I missing a setting or extra step?
View 1 Replies View RelatedAutoCAD Architecture :: External Reference - PDF Really Slow
Dec 8, 2010I am using a pdf file as an xref however while panning/zooming and some other basic commands, the response is really slow.I have already tried using a jpg file but I loose the ability to grab the end point of a line. I am able to grab the end point of a line while using the pdf.
I have 4 GB of ram and nothing else open, so I cannot see this being the problem
AutoCad :: Using Dynamic Block As External Reference
Dec 2, 2013Is there a possibility to use "Dynamic Blocks" as an "External Reference" having the ability to use their features at the same time?
The thing is I have dwg1 and dwg2 files and in them I use "Dynamic Block1". Whenever I update "Dynamic Block1" in one of the dwg files I have to go to "design center" and update the "Dynamic Block1" in other dwg file.
AutoCAD 2010 :: External Reference Layer Will Not Save
Oct 2, 2012I have a drawing that does not save the xref layer setting. I can change colors and thaw different layers but after saving and closing the drawing it reverts back to the original when opened again. I am sure this is a setting but can not find which setting.
View 2 Replies View RelatedAutoCad :: External Reference - Lock Up For 30 Seconds To 10 Minutes
Nov 1, 2012I am having an issue with an external reference. It is basically a 3D drawing of a few trusses with truss bracing installed. I include it with almost every set of drawings. Problem is it often causes my AutoCAD to lock up for 30 seconds to 10 minutes. The problem occurs when switching from paper space to model space or when I load the drawing file.
View 3 Replies View RelatedAutoCAD Architecture :: External Reference Doesn't Show?
Apr 8, 2012I am working with files that somebody else did, I need to bring an external reference and it dosen't show up, then I check on the ref command and seems like the external reference of that file is there, I check also on the layers and they are not off or frezze, what could be the problem?
View 2 Replies View RelatedAutoCad :: Extract Bound External Reference To Its Own Drawing
Jun 4, 2013Is there a way.....
I have a drawing that has external references bound to it. I would like to extract the bound external reference to its own drawing. Can this be done?
AutoCad :: Editing Drawing - Exploding External Reference
Nov 28, 2007Im drawing on autocad 2008, but im having some trouble with trying to explode an 'external reference' this external reference needs to be edited.
I opened a DWT renamed it and saved it as a DWG, then i used the INSERT/EXTERNAL REFRENCES/ATTACH DWG to bring in drawing. When i select the explode button i cant select the drawing i need to edit.
AutoCAD LT :: Don't Get Option In External Reference To Attach Image
Feb 10, 2012I don't get the option in External reference to attach an image. Do I need to reinstall the program?
View 2 Replies View RelatedAutoCAD VB :: Extract Attribute Values From Block In External Reference?
Mar 23, 2013is it possible to extract attribute values from an block in an External Reference using VBA ?
View 5 Replies View RelatedAutoCAD 2010 :: How To Make External Reference File (DXF) Clearer
Jan 16, 2013I had a DXF file with an external reference file inside, when showing in AutoCAD 2012, the external file appeared very 'dull' and blurry. But when I look at the same file in the new AutoCAD 2013, it shows very clear.. this puzzles me, and our clients are complaining about this quite often.
Is there a setting I can change in 2012 version to make it (external file) clearer? The right hand side shows the external file (table and words) much better than the left.
AutoCad :: Make External Referenced Image Into Relative Reference
Dec 21, 2011In AutoCad 2012 how do you make a hard coded externally referenced image into a relative reference? I tried simply removing the trailing path locations from the found at location in the external references manager although that wouldn't let me do it.
View 2 Replies View RelatedAutoCAD Inventor :: Reference Dimensions In IPart Table
Aug 14, 2011The question I want to ask is about reference dimensions in iPart.
I can create a sketch and place reference dimensions on it, there's no problem. I can activate any configuration manually and see the reference dimensions adjusted according to configuration, no problem again.
I would like to know — is it possible to automatically populate column of the iPart table with reference dimension value, as it stands for each configuration?
I was able to find some solution for that, but it's not automatic. I can mark reference dimension of export, and add it as a column to the table, but I need to manually activate each configuration to populate the column with measured reference value. Not very good, because there can be very many configurations.
How to automatically get complete list of reference dimensions values for each configuration of the iPart?
AutoCAD Map 3D :: External Database To SHP Files OD Table
Oct 25, 2011I have shp files and an external database file and I wish to merge the data from the External database to the Shp files OD table.They both have a column with entries matching so I figured I could use a Join to complete this. This is where I have run into difficulties.
I tried to import the spreadsheet using FDO but there is no XYZ data its just pure data. I added dummy XYZ data and tried again but I am unable to insert the data. the checkbox is greyed out, I select the Identity property to match the main title and it does not work.
I tried adding a new data source but I am unable to perform a join with this. right way to import the data from the excel sheet and add / merge the data to the FDO table created by the shp file.
AutoCAD 2010 :: Extract Some Info From Table To Reference File That Can Be Opened In MS Excel
Jun 15, 2013I've spent the last 4 hours searching for an answer to this question, but I simply can't find one.
As a start I think you have to know that I'm currently using AutoCAD 2012.
Here's the problem: I need to extract some info from an AutoCAD table to a reference file that can be opened in Microsoft Excel. Everything I find on the subject is actually an answer to the question "How does <DATAEXTRACTION> work?" or "How to do an extraction of DATA in AutoCAD?"....
In this particular case I have a set of production drawings (cut tickets) for manufacturing of stone. And in every single sheet I have this material schedule or a table, if you wish, that is made with an AutoCAD table. In this schedule I have the height, width and thickness of the stone plate and with a function it measures it's area and volume. What I want to do is to extract those values into a reference file that I can open with Microsoft Excel, as I already said.
How exactly?
AutoCAD VB :: Extracting File Type Or Extension Of External Reference File?
Dec 2, 2013Is their a way to know or extract the file type or file extension of an External Reference file?
View 3 Replies View RelatedAutoCAD Civil 3D :: Structure Reference Alignment Not Holding In Data Reference
Nov 28, 2012I have structures and alignments data referenced. If I assign the structures ref alignments in the dwg with the data refs for labeling, the next time I open the dwg the ref alignments are set back to none, causing the labels to be ?
It seems like this worked in the past?
AutoCad :: One Reference File To Control Multiple Reference Layer Settings
Jun 27, 2012I'm working on a large infrastructure project with numerous of drawings. On quite a few layout drawings I need to have the same base set of references, however I need to change the layer settings (colors, lineweight etc.). This cannot be done in the base reference itself as it is used by others. As the layouts I work with includes other references as well, it is time consuming to filter and change layer settings on each base reference.
My concept is to have a master reference file to manage all layer settings and add/remove base references. When the master reference is referenced into the layout, all layer settings on the base references should stay as set in the master reference. In this way I can easily control all base references with one file and make sure all changes will be the same for all the layouts.
New illustration of concept:
AutoCAD Civil 3D :: Reference Surface (x) Not Found In Reference Drawing
Jul 28, 2011I am getting this error in my production drawings.
My setup is as follows:
- EG.dwg has my existing surface in it. I create a data reference to use it in other drawings.
- Level One.dwg has the EG surface data referenced in, and I use this to create alignments, profiles, and finish surface. All of these are turned in to data references.
- Storm Sanitary.dwg has my pipe designs. I data reference in the two surfaces, profiles, and alignments, and create pipe networks. I create references for these networks.
- Plan Profile.dwg is the production sheet I'm getting this error from. Every one of my civil objects is data referenced in to this drawing. Everything is inserted correctly, the pipes show correct FG surface elevations for their rims, etc.
BUT when I open this drawing, I get this error. I assume it's because my FG surface is not directly in the storm sanitary.dwg.
How do I get rid of this error, without combining drawings, or promoting the surface to one or more drawings? Isn't this exactly what data references is made for?
AutoCAD Inventor :: Bend Table Error / Angle Or Radius Are Outside Table Boundaries
Mar 15, 2012The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies View RelatedAutoCAD 2010 :: Explode Excel Table But Keep Table-layout And Texts
Mar 14, 2013In our company, we put Excel tables in our drawings. The reason we've chosen for Excel-tables is that we can adjust the layout of the table quite easily. These tables consist of grouped cells in a particular company-specific layout. We select the range of the desired cells, copy and paste them in our AutoCAD drawing. This drawing is sent to our customers. The disadvantage of this method is, that when our customers (who use CAD-software of other brands) open the dwg, they don't see the table, but some kind of picture of the table.
Is there a way to 'explode' the excel-table, but keep the specific layout of the table? For attributes in blocks there's the 'Explode Attributes'-command in the Express-tools, but is there something similar for Excel-tables?
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
AutoCAD Civil 3D :: Force Table And Table Text Height To Stay Constant Despite The Scale?
Feb 23, 2012Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
AutoCAD Inventor :: Table Driven IFeatures In A Hole Table?
Oct 16, 2013I have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
AutoCAD Map 3D :: Join Access Table To SHP File Attribute Table?
Dec 9, 2011Having an issue trying to join an access table to a shp file attribute table. I want to use the access table to cross reference the shp file for matching parcel numbers. I have attached the access table in the ODBC using a data source name however it seems to not give me the option to view any records.
View 2 Replies View RelatedAutoCAD Civil 3D :: Table To Table Link On Different Layouts
Feb 18, 2013I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies View RelatedAutoCAD Map 3D :: Use Table Object To Display Linked Table
Nov 20, 2012I am wanting to use an Autocad table object to display fields from an Access database table that is linked to symbols in my drawing.
My objective is create a database table that has detailed notes for call outs in my drawings and then link my call out blocks to the database table and display the blocks and linked descriptions in an Autocad table. If the notes in the database table are edited the Autocad table updates with the new the description from the database.
AutoCad :: Export Excel Table Not As OLE Object But As A Table?
Dec 13, 2013How can I export a excel table to Autocad not as an OLE object but as a Audocad table?
View 7 Replies View RelatedAutoCAD LT :: Table To Table Information Sharing?
Dec 31, 2013Say I had two tables located within AutoCAD, can I make it to where if I put data in one cell of one of the tables that it could automatically populate in a different cell in the other table? Also if this can be done, could it be done linking the data in-between separate layouts?
View 9 Replies View RelatedCorelDRAW X4 :: Setup Vertical Alignment Of Text In Cell For Entire Table / Table Tool?
Jan 18, 2012Is there a way to setup vertical alignment of text in a cell for the entire table, when using Table Tool? It is possible for a single cell, but when selecting a table (or multiple cells) this option is not available.
View 5 Replies View Related