AutoCAD LT :: Array Doesn't Display Properly In Viewport
Dec 21, 2012
I have and array that looks fine in model space but when viewed in a viewport from paperspace, sections of the array look like they are wiped out. Going back to model space everything looks fine. The only way I can get it to fill in is to delete the viewport and create another one. It's then fine for awhile but before long, areas are missing again. I've redone the viewport three times and it's starting to drive me nuts.
View 5 Replies
ADVERTISEMENT
May 8, 2012
previously i was using civil 3d 2010, now while i am using 2012. i want to create a grid of points with easting and northing. i have manually created a point but when i use array command it does not work properly. as u can see in this image.
i created point with proper values of easing and northing but after array easing northing values becomes just -19.
View 5 Replies
View Related
May 2, 2013
when i type, this is what appears.
[URL]
View 4 Replies
View Related
Apr 9, 2011
It appears various people are posting things that are posted in the Readme. For Nitrous these are:
• To prevent issues with Nitrous, ensure you have the most up‐to‐date system drivers. For specific details, see the sections about 3ds Max 2012 / 3ds Max Design 2012 found at URL....
• Applying Unwrap UVW after painting in 2D with Viewport Canvas and painting on top of the Unwrap UVW can sometimes cause 2D paint to fail.
Workaround: If this occurs, apply an Edit Poly modifier on top of the Unwrap UVW modifier.
• Civil View parameters can cause a program error when modifying surface parameters.
• Object Color display will show the object’s material color when set to object color.
Workaround: Enable Use Environment Background and Display Background in the Viewport Background settings (Alt+B).
• Locking the computer can cause the viewports to stop responding in some cases.
Workaround: If this occurs, restart the program.
• Mirrored or negatively scaled objects might display face edges incorrectly.
• The Soft selection Shade Face Toggle does not always properly display the shaded faces.
• MassFX constraints can cause Dummy objects not to display in Realistic mode.
• Body Objects display tessellated/triangulated edges instead of the proper Body curves.
• Back faces display as transparent.
• Hidden Line style does not display texture maps in the viewport.
• Tone Mapper used with a Skylight set to use the mr Physical Sky environment will display a black background when enabled.
• Enable Gamma/LUT Correction does not work on stylized viewports.
• Very large textures (10K x 10K) can cause a program error. Workaround: You can control texture sizes with MAXScript:
NitrousGraphicsManager.SetTextureSizeLimit 512 true
NitrousGraphicsManager.SetBackgroundTextureSizeLimit 1024 true
Or by modifying the following keys in 3dsmax.ini:
ViewportTextureSizeLimitEnabled=1
ViewportTextureSizeLimit=512
ViewportBackgroundTextureSizeLimitEnabled=1
You need to restart 3ds Max after making these changes.-Eric
View 2 Replies
View Related
Jul 25, 2012
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies
View Related
Dec 19, 2012
I have a linetype that is a drain line so it's dashed and has a "D" within it along with an arrow pointing in the direction of flow. The drawing I have contains many of these lines ehich display properly in the viewport meaning you can see the dashes, D's and arrows.
Problem is, I got an as-built from a contractor as pasted it into my drawing. His lines look fine in my model space, but in my viewport the lines appear solid and you don't see the dashes, D's or arrows. I tried MATCHPROP to make the contractors lines match my existing lines but that did not work. I tried andjusting the linetype scale but that doesn't work either.
View 4 Replies
View Related
Jul 7, 2011
For some reason my line type is not showing up properly in my viewport. In model space my lines are dotted, but when I go to viewport they show up continuous??
View 6 Replies
View Related
Oct 22, 2013
I'm using ACAD (2011) most of the time in 3D. I like to work that way and it goes really fast!
Now, sometimes I want to flatten my 3D drawing and show my obscured lines and make them dashed afterwards. With the flatten command and explode it works fine... but... some lines just move! For example, a block with size 100,200,100 turns into a square with size 100.9 x 199.3, even if I use the command in 100% top view!
View 9 Replies
View Related
Apr 6, 2010
With standard CAD objects it is possible to control their display on a per viewport basis by using the layer manager and freezing any unwanted layers in a particular vport.
I'm having trouble controlling the display of FDO objects from an SDF file in the same way though.
View 9 Replies
View Related
Mar 22, 2012
I need to print this drawing and I cannot get either print to PDF or print to printer working properly.
I was asked to create a local area map of the site and i used a google map image as the map. I have a paper space layout with labels and the company title block, with a raster image reference in the model space viewport, when I go to print this drawing using plot PDF the image comes out so grainy it's useless. When I plot to printer the paper space layout comes out great but only a slice of the raster image is printed.
No indication of problems can be seen in autocad's preview mode, and this doesn't happen outside of Autocad- I can open the image and have it print to PDF clearly, and I can open the image and print to printer without problems.
Here's a link that explains what the printer is doing: [URL] .......
The image is supposed to fill the whole viewport, but most of the viewport is blank.
View 0 Replies
View Related
Jun 21, 2012
Another user has created a bunch of sketches and somehow has set the drawing up where all the viewport and our title block are displayed in white. model space everything is fine and is as it should be.
View 5 Replies
View Related
Jun 3, 2013
I'm having an issue with viewports in a drawing not displaying the color of the objects in model space. All of the objects are set to display bylayer, and all of the viewport overrides in the drawing are off. Still, the objects will only display as either white or grey through the viewport, even though the colors show up fine in model space. I've also tried making a new viewport and it also displays everything as either white or gray, so I'm thinking it might be some kind of system variable that I don't know about.
View 2 Replies
View Related
Apr 20, 2012
I've got a problem with simulating a benchframe. The frame is attached to the car's body with 4 flat braces. I now want to attach the braces to the benchframe, but leave them to be able to rotate from each other.
I have fixed them to the body using a pin constraint, which works pretty straight forward but I'm not able to get this working on the side of the benchframe.
I have placed 4 pins, to allign the components and assigned manual contacts with "sliding/no separation" but now the whole construction doesnt move sideways in the X-direction and enormous stresses are developed because the benchframe is not deforming either. I have assigned every contact point and surfaces between the benchframe and the braces as "sliding/no separation".
View 9 Replies
View Related
Jul 31, 2013
Using the DAta Connections tool under Planning and Analysis, also known as Map 3D, I have attached a series of shapefiles and I want to be able to toggle the view of some of them on or off depending on the viewport. Is this possible to do?
View 5 Replies
View Related
Mar 11, 2013
Is there a way for me to display different points in each viewport? I have figured out how to freeze layers and realize I can put the points and labels on different layers but am curious if this is the only alternative?
View 2 Replies
View Related
Jan 10, 2012
I want to calibrate my display properly and I am little confused. There are too many settings and wizards. First of all there are display settings (brightness, contrast, black level, color temperature, sharpness). Second -- graphics card settings (hue, saturation, brightness, contrast, color temperature, color correction curves). Third -- there are Windows color management settings in Control Panel (ICC profiles, WCS profiles, etc). Fourth -- Adobe Gamma. Firth -- I can use calorimeter to set display LUT.
How all that level of settings are related? In what order they should be changed? What color temperature is "best"? How Adobe gamma correlated with Windows 7 color management wizard? What is best? (They are producing different profiles.)
I "just" want to make photos of what I see, see it then on display more or less precisely and then print it.
View 7 Replies
View Related
Jun 12, 2012
have problem with photoshop cs6. Drivers is ok, cs5 work correctly. I attached link:[URL]...
View 6 Replies
View Related
Apr 24, 2013
I'm drafting for an office that likes to create just one single main drawing with everything on top of it (ARCH, STRUC, MEP) and just work frezzing layers on each viewport so of course I have to use "maximize viewport" icon all the time and enter model space from there to work. The problem is when I try to apply hatch it just doesn't show (like if applying hatch to a frozzen layer), I'm very careful making sure that the layer is not frozen or off and still just simply doesn't show, however when I go back to model space is there.
View 7 Replies
View Related
Jun 22, 2012
about a Volume Table style, where I have correctly showing in Model Space and is "Split" in the Table Properties. This is a "Total Volume Table" and is Dynamic.
Just Fine in Model Space... yet is showing within a Viewport (typ. plan sheet) that each Split is simply Staked ontop of each other ?
Thought I (we) came across this a few years ago... yet no issues latetly till now, and also mainly first time I've likely split the Table in R2012 (currently used).
Have maintaining View Orientation "true", yet still nothing.....
Xi Computer (Win7 64bit O.S.)
i7 3770K @ 4.5GHz Sealed Water Cooler
Quad Core w/ Asus P8Z77-V LE mobo
16GB DDR3 @ 1600Mhz RAM
15K Seagate SCSI H.D.
Nvidia Quadro 2000 (span2) + FX4600 (3)
ViewSonic VS2436 series displays (3)
View 4 Replies
View Related
Mar 24, 2012
I've recently installed Photoshop CS5 extended on my new comp It was working fine, but when following a tutorial to make rust or metal it starts having issues.
As you can see below the noise in the left hand picture worksfine, but in the right when applying motion blue I get a fuzzy line down the middle, and occasional a sort of beveled effect around the image.If I drop the motion blur to a low count it's ok, it's when I start upping the amount.
When I first loaded up photoshop it did say it had an issue with my monitor settup which I have recently sorted but the problem still remains.
My computer specs are below.
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.111118-2330)
System Manufacturer: Hewlett-Packard
BIOS: Ver: CHG_712.rom vCHG7.12
Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (8 CPUs), ~3.4GHz
[code][....
View 3 Replies
View Related
Dec 27, 2012
My dragged state leader does not display properly. The attachment runs through my first line of text. My display is set to "As Composed" I do not want the stacked text setting.
View 9 Replies
View Related
Apr 17, 2013
I am running the antique CAD 2004 and went to layouts to start setting up a page. When I drew in the view port, it does not show anything of the model space, zero, zip, nada. Tried "Scale to fit", a new view port with no luck. I opened another project file, it work perfectly, just not this one. It doesn't have any Xref's that I can see, but it does have some proxy objects.
View 3 Replies
View Related
Sep 30, 2011
How does one get the array window in 2012 to open with the array command like it does in 2007
View 2 Replies
View Related
Sep 19, 2012
I'm trying to use the PATH array feature on 2013 to array stairs, and I can't get the array to be 100% accurate. It seems like CAD rounds the decimal to the nearest 3/4" which could be causing the problem.
I set my run to 10.5" and rise to 7.25", array along the angle of the stringer, and there's always a small overlap on the stairs. The "distance between" should be 1'-209/256" and CAD rounds it to 1'-3/4" which is where I believe the error is. Is there any way to fix this or array this correctly? Otherwise...back to the COPY method I suppose.
View 4 Replies
View Related
May 3, 2013
Is there a way to "disable" the display of the viewport "outline" so that it is not seen when looking at the paper space tab on a computer screen? Kind of like how images have frames but you can "hide" them.
View 4 Replies
View Related
Feb 6, 2013
I'm used to work with an ortographic wireframe view and a perspective shaded view (from other 3d app), I've tried to reproduce this in Max, without much success, the problem is switching between the ortographic views, the hotkeys doesn't work properly (the camera never displays what I want after switching) and the ViewCube seems somewhat better, however, when switching views using the ViewCube, sometimes it just doesn't align perfectly with the view so the grid doesn't appear, and I need the grid on the ortho viewport.My install is fully updated. I would like to know if it's possible to make it work properly, if possible with hotkeys. I've already tried to disable the animation, it seems to work a bit, but when I switch to the back view, this bug always pops in.
View 1 Replies
View Related
Dec 13, 2011
After updating to LR 3.6, DNG Profile Editor does not display previews correctly, if base profile is one of the "new technology" camera specific profiles (for example the v4 profiles for Nikon). It looks like the previews are not properly converted to sRGB for display.
I also noticed that if I decompile and then compile such a profile using dcptool of Chromasoft, the resulting profile generates very strange looking pictures.
View 8 Replies
View Related
Nov 6, 2013
I have a drawing which contains 17 layouts in paperspace. When I go to plot all drawings using the sheetset manager its only plots out what is in paperspace. I.e the titleblock and nothing in the viewports, i.e model space.
View 2 Replies
View Related
Sep 25, 2012
Everytime i press the shift key and quotation mark key for the double quotation mark to display on my text on PS cs5 doesn't work. It display a double arrow instead.
View 4 Replies
View Related
Jan 10, 2006
When I have a large image and I try to crop it I cannot control where the crop is to take place. Sometimes I cannot make the selection as large as I want.
I am using CS
View 2 Replies
View Related
Mar 3, 2013
I just wrote a very specific python plugin for someone who uses Gimp on OSX. The plugin doesn't appear in her menus so the installation may not be correct.
1) are there accurate instructions to install python plugins somewhere (preferably in the user's Gimp profile)? Is there a need to set some "executable" flag on the file (and if so how)?
2) in case the plugin doesn't register properly due to some syntax error, is there a way to check that out? On Linux one would start Gimp form a terminal, on Windows I believe gimp-console does it, but hat is the equivalent on OSX?
3) can some knowledgeable OSX user test that my plugin works correctly (PM me a mail address where I can send the plugin)
View 1 Replies
View Related
