AutoCad 2D :: Hatch Doesn't Appear When Applying It From Viewport
Apr 24, 2013
I'm drafting for an office that likes to create just one single main drawing with everything on top of it (ARCH, STRUC, MEP) and just work frezzing layers on each viewport so of course I have to use "maximize viewport" icon all the time and enter model space from there to work. The problem is when I try to apply hatch it just doesn't show (like if applying hatch to a frozzen layer), I'm very careful making sure that the layer is not frozen or off and still just simply doesn't show, however when I go back to model space is there.
View 7 Replies
ADVERTISEMENT
Jul 25, 2012
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies
View Related
Jan 23, 2011
I have a viewport that is not showing the hatch pattern. In one layout tab, the hatch shows. In another tab, the hatch does not. The layer is not frozen or off, on the sheet or in the viewport.
Other items and hatch patterns on that same layer show up. The display is set to 2D wireframe. I even cut - paste a viewport from the working layout tab to the non-working layout tab and the pattern disappears.
View 4 Replies
View Related
Mar 21, 2013
I noticed when creating assemblies, applying a positional constraint, the parts don't move. In order to get the parts to "move" to their constrained position I have to try and drag them with the mouse then they snap into place. Also updating the assembly works as well.
What setting could I have changed so that once I press apply on a constraint it moves the part immediately?
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 5 Replies
View Related
May 31, 2012
Every so often when I save for web and try to change the resolution to something else it doesn't update. CS5 had an apply button, but there isn't one CS6. I find that I have to enter different numbers a few times until it finally updates and I can save.
View 5 Replies
View Related
Dec 21, 2012
I have and array that looks fine in model space but when viewed in a viewport from paperspace, sections of the array look like they are wiped out. Going back to model space everything looks fine. The only way I can get it to fill in is to delete the viewport and create another one. It's then fine for awhile but before long, areas are missing again. I've redone the viewport three times and it's starting to drive me nuts.
View 5 Replies
View Related
Apr 17, 2013
I am running the antique CAD 2004 and went to layouts to start setting up a page. When I drew in the view port, it does not show anything of the model space, zero, zip, nada. Tried "Scale to fit", a new view port with no luck. I opened another project file, it work perfectly, just not this one. It doesn't have any Xref's that I can see, but it does have some proxy objects.
View 3 Replies
View Related
Oct 25, 2011
I need to add a hatch fill polyline area but leave the text island out. What I did is put put Polyline ID and Text island ID into an ObjectIDCollection. The code doesn't throw any error but I can't see the hatch.
Public Function AutoCADAddHatch(ByRef newAddedHatch As Hatch, ByRef HatchElementIDs As ObjectIdCollection, ByVal HatchColour As Autodesk.AutoCAD.Colors.Color,
_ ByVal HatchLayerName As String, Optional ByVal PatternName As String = "SOLID", Optional ByRef strError As String = "") As Boolean
Dim db As Database = acApp.DocumentManager.MdiActiveDocument.Database
[Code] ......
View 9 Replies
View Related
May 24, 2012
OS: MS Windows7 Ultimate x64, v6.1.7601 SP1 build 7601
PC Config.: Intel Core2Quad CPU Q6600 @ 2.4GHz, DG33FB, 8GB RAM
CDGS x6 (64 bit) v16.0.0.707
1. Facing problem of frequent CorelDraw X6 crash while working and seemingly most of the times it even don't sent any error messages to Corel support.
2. Transformations docker doesn't accept enter for applying changes, it only responds when we hit apply. It is good to move through options by using TAB, but it should accept ENTER as “APPLY” as we make desired change in any parameter. Mostly I prefer dockers to property bar.
3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key.
4. Using pick tool double click a group of objects including paragraph text and get desired rotation is still a havoc despite we are using x6 (64-bit). It kills much of our time. See screen shot below:
5. I am also facing problem in EPS editable import as shown in the screen shot below "An error occurred while processing PIEE.eps. The file cannot be opened."
The file is created in x6 and has 2 pages for two print jobs. Both pages has flatten background text and fountain lenses to RGB bitmap. All texts converted to curves. Page 1 exported to EPS and then imported as EPS editable successfully. Page 2 exported to EPS and then imported as EPS editable - shown above error. I have also tried importing this page to a fresh file and then created fresh EPS but got the same erroneous result.
As far as my experience with PDF is not good, because sometimes PDF also produces undesired result on RIP specially as RGB images, bar codes, drop shadows etc. I believe that EPS files are far more reliable in prepress jobs.
View 6 Replies
View Related
Nov 6, 2013
I have a drawing which contains 17 layouts in paperspace. When I go to plot all drawings using the sheetset manager its only plots out what is in paperspace. I.e the titleblock and nothing in the viewports, i.e model space.
View 2 Replies
View Related
Mar 28, 2012
I am trying to write a script that will automatically hatch several drawings. The drawings contain an area in which there are several objects that need to be hatched. For each drawing the objects vary in location within the one area.I figured I would set up my script to encompass the area with the object select hatch technique. This works fine if the objects in the area have no Islands. However when an object within the "object select hatch area" contains Islands it shades the whole object ignoring the Island or if it does recognize an island it will create an individual hatch for it.
However when I use the pick internal point method the hatch comes out as expected for the object with the Islands in it.
View 5 Replies
View Related
Apr 4, 2012
When I add a skylight to my scene, then enable "Smooth + Highlight" with "Illuminate with Scene Lights", nothing is lit by the skylight. Is there any way to get the viewport to show me how the skylight is lighting my scene?
3DSMax 2011 | Windows 7 Ultimate x64
Apple iMac 27" Bootcamp
Intel Core i7 3.4GHz
16GB RAM
ATI (AMD) Radeon HD 6970M
View 2 Replies
View Related
Oct 8, 2012
I have a skinned mesh and want to remap the UVW's on it.
I apply an Unrwap UVW and move the UVW's to channel 2, but when i edit them there is no update in the viewport.
Max 2013 64 + PU5
View 6 Replies
View Related
May 7, 2013
rencently I am testing the PFlow. I do not know why I could not see my mapped particles in the viewport I projected a plane with map to particles. Pic 1 is I captured PFlow nodes. Pic 2 is the one I rendered out. Even I used Data operator, still I could not get it working. I also tried in 3ds max 2013, the same thing.
View 5 Replies
View Related
May 16, 2011
I wanna confirm this bug. I'm almost sure it's generalized but who knows. But in most systems I've tried I couldn't get Gradient Ramp to show as viewport background when using Nitrous.
System specs vary greatly from Mac Pros to Dells and ATI and Geforces and one QuadroFX 3700. Most with recent graphic drivers.
View 2 Replies
View Related
Feb 10, 2012
So I've created this wall section and used viewbreaks to break the crop regios up so i can fit the final view on a sheet.The problem is, when I place the broken up section on a sheet, the viewport does not break up like the view region.
How do i break up the viewport on the sheet so I can squeeze the visable regions together?
View 2 Replies
View Related
Apr 9, 2011
It appears various people are posting things that are posted in the Readme. For Nitrous these are:
• To prevent issues with Nitrous, ensure you have the most up‐to‐date system drivers. For specific details, see the sections about 3ds Max 2012 / 3ds Max Design 2012 found at URL....
• Applying Unwrap UVW after painting in 2D with Viewport Canvas and painting on top of the Unwrap UVW can sometimes cause 2D paint to fail.
Workaround: If this occurs, apply an Edit Poly modifier on top of the Unwrap UVW modifier.
• Civil View parameters can cause a program error when modifying surface parameters.
• Object Color display will show the object’s material color when set to object color.
Workaround: Enable Use Environment Background and Display Background in the Viewport Background settings (Alt+B).
• Locking the computer can cause the viewports to stop responding in some cases.
Workaround: If this occurs, restart the program.
• Mirrored or negatively scaled objects might display face edges incorrectly.
• The Soft selection Shade Face Toggle does not always properly display the shaded faces.
• MassFX constraints can cause Dummy objects not to display in Realistic mode.
• Body Objects display tessellated/triangulated edges instead of the proper Body curves.
• Back faces display as transparent.
• Hidden Line style does not display texture maps in the viewport.
• Tone Mapper used with a Skylight set to use the mr Physical Sky environment will display a black background when enabled.
• Enable Gamma/LUT Correction does not work on stylized viewports.
• Very large textures (10K x 10K) can cause a program error. Workaround: You can control texture sizes with MAXScript:
NitrousGraphicsManager.SetTextureSizeLimit 512 true
NitrousGraphicsManager.SetBackgroundTextureSizeLimit 1024 true
Or by modifying the following keys in 3dsmax.ini:
ViewportTextureSizeLimitEnabled=1
ViewportTextureSizeLimit=512
ViewportBackgroundTextureSizeLimitEnabled=1
You need to restart 3ds Max after making these changes.-Eric
View 2 Replies
View Related
May 2, 2013
I am trying to entmake a hatch entity from a hatch template.
After entget the template hatch entity, i get the followings
Select object: ((-1 . <Entity name: 7ed11b78>) (0 . "HATCH") (330 . <Entity
name: 7efc7c10>) (5 . "737") (100 . "AcDbEntity") (67 . 0) (410 . "Model") (8 .
"SECTION-LABEL") (62 . 255) (100 . "AcDbHatch") (10 0.0 0.0 0.0) (210 0.0 0.0
1.0) (2 . "SOLID") (70 . 1) (71 . 0) (91 . 1) (92 . 1) (93 . 8) (72 . 1) (10
633596.0 5.79713e+006 0.0) (11 633519.0 5.79713e+006 0.0) (72 . 1) (10 633519.0
5.79713e+006 0.0) (11 633519.0 5.79708e+006 0.0) (72 . 1) (10 633519.0
5.79708e+006 0.0) (11 633500.0 5.79708e+006 0.0) (72 . 1) (10 633500.0
[code]....
Now I wrote the following code using the above data as follows
(entmake (list (cons 0 "HATCH") (cons 67 0) (cons 410 "Model") (cons 8 "SECTION-LABEL") (cons 62 255) (cons 10 (list 0.0 0.0 0.0)) (cons 210 (list 0.0 0.0 1.0)) (cons 2 "SOLID") (cons 70 1) (cons 71 0) (cons 91 1) (cons 92 1) (cons 93 8) (cons 72 1) (cons 10 pt1) (cons 11 pt2) (cons 72 1) (cons 10 pt2) (cons 11 pt3) (cons 72 1) (cons 10 pt3) (cons 11 pt4) (cons 72 1) (cons 10 pt4) (cons 11 pt5) (cons 72 1) (cons 10 pt5) (cons 11 pt6) (cons 72 1) (cons 10 pt6) (cons 11 pt7) (cons 72 1) (cons 10 pt7) (cons 11 pt8) (cons 72 1) (cons 10 pt8) (cons 11 pt1) (cons 97 0) (cons 75 0) (cons 76 1) (cons 98 1) (cons 10 (list 0.0 0.0 0.0)) (cons 450 0) (cons 451 0) (cons 460 0.0) (cons 461 0.0) (cons 452 1) (cons 462 1.0) (cons 453 2) (cons 463 0.0) (cons 63 5) (cons 421 255) (cons 463 1.0) (cons 63 7) (cons 470 "LINEAR")))
The point variables pt1, pt2....pt8 are all defined. But when I run the code the hatch is not being created? Why?
View 1 Replies
View Related
Aug 24, 2011
I have a hatch (ANSI31) enclosed by a closed polyline. Whenever I change the hatch from ANSI31 to GRAVEL some of the hatch shows up outside the boundary. The Polyline consists of both arcs and line segments, and the hatching errors are occurring within the radius of the arc segments. Changing it from Associative to Non Associative makes no change.
I am using AutoCAD 2011.
View 9 Replies
View Related
Aug 6, 2008
I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
View 9 Replies
View Related
Apr 17, 2010
It is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies
View Related
Jan 2, 2013
Just downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
View 9 Replies
View Related
Feb 22, 2013
I want to be able to add a Block Reference to a hatch. I'm adding the block reference to an ObjectIdCollection and the hatch is not taking it when using AddLoop().
So I thought maybe I needed to add the location of the polyline (curve-like) object that is member of the blockreference to the hatch, but I don't know how to get its ObjectId.
Hatch thisHatch = new Hatch();thisHatch.Layer = layerName;thisHatch.SetDatabaseDefaults();thisHatch.SetHatchPattern(patternType, patterName);thisHatch.Color = Color.FromColorIndex(ColorMethod.ByColor, colorIndex);thisHatch.Transparency = new Transparency((Byte)(255 * (100 - 60) / 100));tSpace.AppendEntity(thisHatch);transaction.AddNewlyCreatedDBObject(thisHatch, [code]........
Also, I'm trying to delete certain HatchLoop that is associated to a polyline but I don't know how to do it. I'm going through the loops in the hatch but I don't know what to do there. I wanna do this so I create a new and different hatch on top.
I think one could also copy all the loops except the one one wants to delete, but I'm not sure how to tell which one is the one I want to delete that is the one associated to a polyline or that is in certain region.
View 1 Replies
View Related
Dec 17, 2011
I have AUTOCAD LT 2012 - windows 7 - SP1
Neither the button for Hatching or the Draw Hatch menu do not activate the HATCH DIALOG BOX?
This means I cannot Hatch?
I have also added the Hotfix for the Ribbon and it made no difference.
View 6 Replies
View Related
May 6, 2013
I've migrated from 2005 to 2014 LT and wondered if they have added to the hatch commands. I've looked and haven't found anything. Is there a command that you can pick a hatch pattern already shown on the drawing and make that pattern the existing one to use? I sometimes have multiple hatch patterns and scales, and wanted a quick way to go from one to another without lisp help.
View 3 Replies
View Related
Mar 9, 2012
How do I change a polygonal viewport to a rectangular viewport?
View 5 Replies
View Related
Jan 23, 2013
Problem: When I create a new viewport, another viewport's paperspace blanks out or disappears. When I copy a viewport over, the new VP doesn't show anything and you can't maximize/"enter" its paperspace; it's like a simple rectangle, but the properties box says it is indeed a viewport.
Ex. Viewport 1 shows the top view of an object, Viewport 2 shows the right side view... as soon as I add Viewport 3, the top view in VP 1 blacks out. I attempt to ReDraw, Regenerate, etc, but it doesn't re-appear. I've run Plot Preview to see if maybe it's just a fluke with the graphics card on my screen, but alas, even in plot preview the viewport is blanked out.
It almost seems like there is a limited number of viewports I can use.
Solution: Run the MaxActVP command and set the value to a number greater than the number of VPs you actually need. This particular file had that value set at 2; hence, why a new, third VP blanked out the first one.
View 1 Replies
View Related
Jan 20, 2014
As in the title, expected result in attached drawing. I'm trying to change Origin X /Y, but that doesn't change the origin of the hatch. It there a setting that controls it?
P.S. Is that drawing supposed to be 0.8Mb??
View 8 Replies
View Related
Jul 12, 2012
I have a drawing with a viewport that fits to the page. And I created another smaller viewport over top that just shows the legend. Now when I try to double click inside the smaller viewport it always goes into the larger one. I have tried bringing the smaller one to the front but that didn't work. I know that I can clip the larger viewport around the smaller one or bring the legend right into paperspace or slid the smaller one off to the side work in it and slide it back. This is more out of curiosity of how to get into the smaller viewport.
View 2 Replies
View Related
Jul 20, 2011
I am wanting to insert a second viewport over an existing viewport and have the information in the existing viewport behind the second viewport and not seen. I want the second viewport boundary to be the "trimming" edge of the existing viewport. How do I do this?
View 3 Replies
View Related
Jul 1, 2011
I did a test drawing with 4 viewports in paperspace.I frozen a layer in each viewport (as a viewport override, not global), and wrote code to gather info on layer overrides in viewports.The function takes in a database, and is generally used on drawings only open in memory:
public static bool GetLayerInfoFromDB2(Database db) { //do viewports on layoutstry {using (Transaction tr = db. Transaction Manager. Start Transaction()) { ObjectId ldid = db.LayoutDictionaryId;DBDictionary ld = (DBDictionary)tr.GetObject(ldid,
[code]....
the odd thing is it never finds the frozen viewports on the first viewport. It catches the others fine.I cannot see anything odd either, the counts of viewports and layers are all correct, and the drawing has no problems.Is there something that must be done to initialize the mechanism that reads viewport overrides?
View 2 Replies
View Related
