After Effects :: Text Doesn't Display Properly (CS4)?

May 2, 2013

when i type, this is what appears.
 
[URL]

View 4 Replies


ADVERTISEMENT

AutoCAD LT :: Array Doesn't Display Properly In Viewport

Dec 21, 2012

I have and array that looks fine in model space but when viewed in a viewport from paperspace, sections of the array look like they are wiped out.  Going back to model space everything looks fine.  The only way I can get it to fill in is to delete the viewport and create another one.  It's then fine for awhile but before long, areas are missing again.  I've redone the viewport three times and it's starting to drive me nuts.

View 5 Replies View Related

After Effects :: Text Not Showing Up Properly?

Jun 22, 2013

I want to do some text animations. However, when I place in my text layer and type in my text it comes up a a bunch of black blocks, as per my screen shot. 

[URL]

View 2 Replies View Related

Photoshop :: How To Calibrate Display Properly

Jan 10, 2012

I want to calibrate my display properly and I am little confused. There are too many settings and wizards. First of all there are display settings (brightness, contrast, black level, color temperature, sharpness). Second -- graphics card settings (hue, saturation, brightness, contrast, color temperature, color correction curves). Third -- there are Windows color management settings in Control Panel (ICC profiles, WCS profiles, etc). Fourth -- Adobe Gamma. Firth -- I can use calorimeter to set display LUT.
 
How all that level of settings are related? In what order they should be changed? What color temperature is "best"? How Adobe gamma correlated with Windows 7 color management wizard? What is best? (They are producing different profiles.)
 
I "just" want to make photos of what I see, see it then on display more or less precisely and then print it.

View 7 Replies View Related

Photoshop :: CS6 Display Not Working Properly?

Jun 12, 2012

have problem with photoshop cs6. Drivers is ok, cs5 work correctly. I attached link:[URL]...

View 6 Replies View Related

Photoshop :: Image Display Not Working Properly?

Mar 24, 2012

I've recently installed Photoshop CS5 extended on my new comp It was working fine, but when following a tutorial to make rust or metal it starts having issues.
 
As you can see below the noise in the left hand picture worksfine, but in the right when applying motion blue I get a fuzzy line down the middle, and occasional a sort of beveled effect around the image.If I drop the motion blur to a low count it's ok, it's when I start upping the amount.
 
When I first loaded up photoshop it did say it had an issue with my monitor settup which I have recently sorted but the problem still remains.

My computer specs are below.
 
   Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.111118-2330)
System Manufacturer: Hewlett-Packard
               BIOS: Ver: CHG_712.rom vCHG7.12
          Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (8 CPUs), ~3.4GHz
     
[code][....

View 3 Replies View Related

After Effects :: CC Not Rendering Properly

Jul 3, 2013

So today I was editing and I finished, so I tried to render it so I can have in a .avi. But once I rendered it I got no errors or nothing. So I went to the desktop were it should have been placed, I loaded it and it didn't render properly after a couple of secs the music stops playing and I didn't get the glow effects or the full edit. How do I fix this tell me if you need sertain information.

View 6 Replies View Related

3ds Max :: ViewCube Doesn't Work Properly

Feb 6, 2013

I'm used to work with an ortographic wireframe view and a perspective shaded view (from other 3d app), I've tried to reproduce this in Max, without much success, the problem is switching between the ortographic views, the hotkeys doesn't work properly (the camera never displays what I want after switching) and the ViewCube seems somewhat better, however, when switching views using the ViewCube, sometimes it just doesn't align perfectly with the view so the grid doesn't appear, and I need the grid on the ortho viewport.My install is fully updated. I would like to know if it's possible to make it work properly, if possible with hotkeys. I've already tried to disable the animation, it seems to work a bit, but when I switch to the back view, this bug always pops in.

View 1 Replies View Related

Lightroom :: Previews Are Not Properly Converted To SRGB For Display

Dec 13, 2011

After updating to LR 3.6, DNG Profile Editor does not display previews correctly, if base profile is one of the "new technology" camera specific profiles (for example the v4 profiles for Nikon). It looks like the previews are not properly converted to sRGB for display.
 
I also noticed that if I decompile and then compile such a profile using dcptool of Chromasoft, the resulting profile generates very strange looking pictures.

View 8 Replies View Related

After Effects :: Templates Not Displaying Properly

Nov 23, 2013

How can I make templates work properly on the AE cc version, when there's not a GPU-supported graphic card on my computer?

View 3 Replies View Related

Photoshop :: Mac CS5 Doesn't Display Double Quotation Mark But Display Double Arrow?

Sep 25, 2012

Everytime i press the shift key and quotation mark key for the double quotation mark to display on my text on PS cs5 doesn't work. It display a double arrow instead.

View 4 Replies View Related

Photoshop :: Crop Doesn't Work Properly

Jan 10, 2006

When I have a large image and I try to crop it I cannot control where the crop is to take place. Sometimes I cannot make the selection as large as I want.

I am using CS

View 2 Replies View Related

GIMP :: Plugin Doesn't Register Properly

Mar 3, 2013

I just wrote a very specific python plugin for someone who uses Gimp on OSX. The plugin doesn't appear in her menus so the installation may not be correct.

1) are there accurate instructions to install python plugins somewhere (preferably in the user's Gimp profile)? Is there a need to set some "executable" flag on the file (and if so how)?

2) in case the plugin doesn't register properly due to some syntax error, is there a way to check that out? On Linux one would start Gimp form a terminal, on Windows I believe gimp-console does it, but hat is the equivalent on OSX?

3) can some knowledgeable OSX user test that my plugin works correctly (PM me a mail address where I can send the plugin)

View 1 Replies View Related

Edge Animate CC :: Embedded Google Map Won't Display Properly On Page

Jan 17, 2014

he problem im having is that the google map will not start at the target address when I place the code for it in   creationcomplete. It only loads properly  when I place the code in a   trigger on the timeline . Although it loads slow when in a trigger.This is the code im using in the creationcomplete and in the trigger.
 
var container = sym.$("container");var map = '<iframe width="'+container.width()+'" height="'+container.height()+'"   frameborder="0" scrolling="no" marginheight="0" marginwidth="0" src="https://maps.google.com/maps?f=q&source=s_q&hl=en&geocode=&q=7120+Boul       +St+Laurent,+Montreal,+QC,+Canada&aq=0&oq=7120+boul+st&sll=45.534114, 73.617124&sspn=0.006907,0.016512&ie=UTF8&
[code]....
 
this is what it looks like when I place the code in creation complete..you see the map is thier but it doesnt start at the target. It doesnt start at the right address..This is what the map looks like when I place it in a trigger on the timeline.you see it loads correctly on the target address.

View 1 Replies View Related

Photoshop :: Lighting Effects Not Working Properly?

Oct 8, 2012

If you go to filter,render, lighting effects. The Frame pops up to use this effect including with a tool to manipulate the light. My tool however does not show up and how I can get my tool to show up again?

View 1 Replies View Related

GIMP :: Layer Effects Not Functioning Properly?

May 23, 2013

For instance if i want to add inner glow for layer, let's call it logo, even though i use the python version of the plug-in i'm unable to see the preview and when i submit the layer effect it creates a new layer but there is absolutely no effect created.

I'm trying to move from windows and photoshop to linux and gimp as my only an primary os and tool in case of gimp. I mean is there any other way especially for stuff like dropshadow, stroke and stuff like that? I mean i can think of several possible solutions but all of them just seems so slow it makes me want to go back to windows and adobe products.

(Ubuntu 13.04, cinnamon)

View 2 Replies View Related

GIMP :: Layer Effects Not Functioning Properly

May 23, 2013

Experiencing trouble with layer effects? For instance if i want to add inner glow for layer, let's call it logo, even though i use the python version of the plug-in i'm unable to see the preview and when i submit the layer effect it creates a new layer but there is absolutely no effect created.

I'm trying to move from windows and photoshop to linux and gimp as my only an primary os and tool in case of gimp. So why is such a great feature so sucky in gimp? I mean is there any other way especially for stuff like dropshadow, stroke and stuff like that? I mean i can think of several possible solutions but all of them just seems so slow it makes me want to go back to windows and adobe products.

Could the problem be with my setup? (Ubuntu 13.04, cinnamon)

View 2 Replies View Related

After Effects :: 3D AI Layer Won't Continuously Rasterize Properly

Jul 29, 2011

How come some AI Files I use in a comp, that has the continuosly raterize option checked, becomes soft when the 3d layer option is also checked?
 
The AI object looks slightly unsharp until I click continuously raterize, then it is good to go to scale anyway I want. But it get blurry again if I click the 3D Layer option.
 
Note that this blurring takes place whether there is a camera or not in the composition and that nothing is animated so it can't be a motion blur issue.

View 17 Replies View Related

After Effects :: Cineware Not Translating Emitters Properly?

Jul 7, 2013

In After Effects, using Cineware, the particles from my emitters aren't properly making it in to After Effects.For example, here's frame 40 in Cinema 4D:
 
Now, here's that same frame in After Effects.Both the C4D and AE files are using the same frame rate (24). And if I keep playing the AE timeline, it does add more particles, but nowhere near like it is in the actual C4D file.For reference, I'm running Cinema 4D Studio R14 and AE CC.

View 1 Replies View Related

Premiere Pro :: Audio Effects Not Exporting Properly

Feb 6, 2014

I'm working with the denoiser filter cleaning up some audio in an interview. In the timeline the audio sounds clean but on the export certain clips revert to their non-denoised state. It seems to happen with the same couple clips and I have tried unlinking and relinking the media, outputting audio only, outputting just pieces of the timeline and, of course, restarting my machine. There are lots of other clips in the timeline using the same filter and they sound fine 

View 1 Replies View Related

Photoshop :: Color Range Doesn't Work Properly In CS3

Oct 19, 2008

I have a problem with CS3. Since a few weeks I can't use properly "Colour Range" feature.
Especially for bright colour the Colour Range doesn't select what I want to select. For example I want to select a bright cloud and can't select it with Colour Range. Of course I checked if there is any information or I have a burn area. I use several different setting but I still have the problem.

I used 8/16 bit, Adobe RGB/sRGB
At Colour Range I use:
- Sampled colours
- Selection
- Fuzziness: how much I need it
- Selection preview: None

View 1 Replies View Related

Revit :: Xref Doesn't Load Properly On One File

Aug 9, 2011

On AutoCAD 2010, my x-ref does not load properly on one file and does on another one, detach it does not work.

View 1 Replies View Related

AutoCAD 2010 :: Flatten Doesn't Work Properly

Oct 22, 2013

I'm using ACAD (2011) most of the time in 3D. I like to work that way and it goes really fast! 

Now, sometimes I want to flatten my 3D drawing and show my obscured lines and make them dashed afterwards. With the flatten command and explode it works fine... but... some lines just move! For example, a block with size 100,200,100 turns into a square with size 100.9 x 199.3, even if I use the command in 100% top view!

View 9 Replies View Related

Illustrator :: Chinese Input Doesn't Work Properly In CC (Mac)

Nov 17, 2013

As what the title says, inputting Chinese characters in Illustrator CC on Mac is not possible. Is there any way to fix this besides waiting for Adobe to release a patch?

View 4 Replies View Related

Lightroom :: Print Module Doesn't Work Properly?

Jun 8, 2012

in print module main window for image control (not preview window in the left upper corner) is blank. what is the reason and how can be remedied? os Mac Lion 10.7.3 lightroom 4 ( the 3-rd version had the same problem)

View 8 Replies View Related

Premiere Pro :: Cross Dissolve Still Doesn't Fade Properly

Feb 14, 2014

Cross dissolve will not fade out clips correctly. It gets down to 10-15% opacity on the last frame and that's the lowest it goes. During playback, you can see how abrupt the fade is.
 
Ticking the "Composite in Linear Color" sometimes improves it, but it's still not a smooth fade. Why is it that I can manually add opacity keyframes to fix this problem (regardless of "comp"), but cross dissolve cannot do a smooth fade?
 
The following are screenshots of the last frame before the clip ends. The cross dissolve is 30 frames long.My system is i5, 560GTX, CUDA enabled, PP CC 7.2.1, Windows 8.1.
 
-White background, last frame, Composite not enabled:
 
-White background, last frame, Composite ENABLED:

With a white background, comp enabled is a bit better, but you can still see the content. I'd expect another frame or two before a complete fade. Black background, last frame, Composite not enabled:

Again, I'd expect another frame or two before total darkness. Oddly enough, after adding and deleting opacity keyframes and switching comp on and off, I managed to get a nice smooth fade with comp OFF with the above example. Some kind of bug? Can't seem to duplicate it yet.Black background, last frame, Composite ENABLED:
 
With the default black background, having comp enabled makes it WORSE. This has been happening since 2011, here's a thread over on the Creative Cow forum talking about the same issue: (and I know there's threads here on the Adobe forum talking about it too)URL....

View 3 Replies View Related

Photoshop :: Selecting With Colour Range Doesn't Work Properly

Sep 18, 2012

If I have elements on separate levels and I use the colour range option to select the area, it works on all the levels, not just the level I have selected.  That's not what I want!  I only want it to select the colour range on that one level.  The work around is to manually turn off other levels, but on a  file with lots of levels, that can be tedious.  Can this be avoided?  Incidentally, magic wand works only on the selected level, but not colour range (or color range, if you are American).

View 15 Replies View Related

Photoshop :: Recording Save For Web In Action Still Doesn't Work Properly In CS6 13.0.1?

Aug 31, 2012

There is still an issue with making new actions that include saving for web. While recording the action, save for web functions as it should. But once the action is played, regardless of the original format the saved image should be, it gives it an html filename extension.
 
[URL]
 
I have spoken about this bug with a friend that is a computer programmer. Considering that the action is saving the file correctly, and it's only the name that is not saving properly indicates that this is a superficial error, and not an issue that would require rewriting the code completely. Also consider that this WAS functioning properly in CS5, and that this is a very easily reproducible bug.

View 3 Replies View Related

CorelDRAW Graphics Suite X3 :: SE Doesn't Show Some Of Objects Properly

Apr 20, 2011

I've just installed Corel X3. When I open a corel 12 document from my second computer, my new Corel x3 doesn't show most of the objects. Instead - it only shows "ghost" objects. I have made a print screen and it looks like that.

View 14 Replies View Related

Revit :: 2014 Materials Browser Doesn't Work Properly

Oct 8, 2013

When I try to open the material browser in Revit 2014, the screen opens. But suddenly Revit in totally doesn't work and it says 'Does not respond'When i try to close the material browser the whole program closes and my work is lost unsaved.

View 1 Replies View Related

AutoCad :: 2010 LT Doesn't Print Reference Image Properly

Mar 22, 2012

I need to print this drawing and I cannot get either print to PDF or print to printer working properly.

I was asked to create a local area map of the site and i used a google map image as the map. I have a paper space layout with labels and the company title block, with a raster image reference in the model space viewport, when I go to print this drawing using plot PDF the image comes out so grainy it's useless. When I plot to printer the paper space layout comes out great but only a slice of the raster image is printed.

No indication of problems can be seen in autocad's preview mode, and this doesn't happen outside of Autocad- I can open the image and have it print to PDF clearly, and I can open the image and print to printer without problems.

Here's a link that explains what the printer is doing: [URL] .......

The image is supposed to fill the whole viewport, but most of the viewport is blank.

View 0 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved