Premiere Pro :: Audio Effects Not Exporting Properly
Feb 6, 2014
I'm working with the denoiser filter cleaning up some audio in an interview. In the timeline the audio sounds clean but on the export certain clips revert to their non-denoised state. It seems to happen with the same couple clips and I have tried unlinking and relinking the media, outputting audio only, outputting just pieces of the timeline and, of course, restarting my machine. There are lots of other clips in the timeline using the same filter and they sound fine
View 1 Replies
ADVERTISEMENT
Dec 24, 2013
Have reinstalled Premiere Pro 6.0.5 because I cannot drag Audio Transitions or Effects to any Timeline sequences in my Projects. Have tried modifier keys, but to no avail.
View 1 Replies
View Related
Dec 9, 2013
I'm exporting DSLR footage with synced audio in order to "bake" the audio in. I'm going to bring the export into Prelude to organize and then back into Premiere to edit. What are the best export settings (including target and maximum bitrate) to maintain top quality footage that I'll continue editing?
View 1 Replies
View Related
Jan 14, 2014
I recently started to work with the Adobe suit so i am not yet used to the workflow. We are serval people working on the post production of a short movie filmed with a red SCARLET in raw which means that the files are pretty big. The audio where captured in serval tracks who all have been merged with the video clips. The clips have thereafter been cut and placed in its right place. So now it is my job to work with the sound design. I have tryd to export the audio in both AAF and OMF and every time i open it up in Audition it sais that the media is offline. On my computer all i have is the orgininal Audio files. Is there anyway to get only the audio (all the tracks) to Audition, without having them searching for the merged files. For example creating new Audio from the cutted tracks?
View 1 Replies
View Related
Feb 26, 2014
I am having an issue exporting my sequence which contains final AIFF mix (24 bit 48 kHz) into a 'same-as-source' ProRes 422 file with 24 bit audio. I am specifically trying to export media with 'Match Sequence Settings' checked to create an identical output of what my sequence is. I wind up only creating a PR422 with 16 bit audio rather than 24 bit audio.
My sequence contains ProRes 422 media and 24 bit AIFF final stereo mix (1 audio file) from our Sound department.
My sequence is currently setup as "Custom" at 1920x1080, 23.976 fps, Square Pixels, Progressive, etc. Audio is 48 kHz (I don't see an option for choosing different bit rates in the 'Sequence Settings').
Using 'Match Sequence Settings', my options to alter the audio are "greyed out" and unavailable. I'm not sure why 'Match Sequence Settings' doesn't recognize that I am cutting with 24 bit audio and, instead, only exports 16 bit audio.
View 1 Replies
View Related
Dec 30, 2013
I am having an issue with my audio sample rate. For some reason it is set at 8 khz by defualt when I am exporting. This was not an issue until the latest update (2 weeks ago). I'll try and give all the info I can up front. Also I tried customer support...
Ok the issue I am addressing is that the audio sample rate when exporting is at 8khz by default. Which to my knowledge has NO relevant use what so ever. Even when I set the file format to h.264 it insists on resetting to 8khz. Even if I manually set everything look at the render queue and click on output module again it changes the sample rate back to 8 khz automatically which I must adjust again. Why can it not just be set at 48000 like every other adobe product is and like it used to be two weeks ago.
View 4 Replies
View Related
Oct 17, 2013
I have created keyframes from audio file and used them to generate some effect, all works fine, it is amazing how easy it is However, I would like to generate flash (?) so that these effects would be dynamic to different audio files after export.
What I want is basically to create effects that can be used in life event to the streaming music.
View 4 Replies
View Related
Aug 1, 2013
I have made a short film of 6 minutes (in 6 parts on after effects) I have added all the effects and the camera work on AE, but it needs a lot of editing here and there, which I find impossible to do on AE since you can't cut and join scenes like Premier pro. I need to import all these sequences onto premier pro for editing now. The problem is once I import the files, it imports in the right order in systematic folders etc, but it doesn't show any of the camera work or the special effects like gaussian blur etc. All my hard work has gone.
There must be a way you can import the after effects file on premier the way it looks on AE.
Another problem is I read some boards and it has been suggested to edit the clips first on premier and then add effects on AE but I read this really late and I've already composited the whole film on AE. I just need premier for cutting now.
P.S: I also thought about exporting the AE sequences as TGA files but there's ZERO space left in my internal hard disk for that, and it would take forever to export them all anyway. Any other kind of export would reduce the original quality which I dont want, and which I dont have space for anyway, so that option is out as well.
View 5 Replies
View Related
Sep 1, 2013
Recently I upgraded to Lightroom 5.0. I have been noticing that when I export images at 1000px max and 100% quality, the image is very grainy. I can open that same image in Photoshop CC from Lightroom, resize the image to 1000px max, and save, and the image looks great.The first photo is the Lightroom 5.0 export. The second is the Photoshop CC resize and save. never had this issue with any earlier version of Lightroom and I have been using it since version 1.0.
View 2 Replies
View Related
Feb 14, 2014
Cross dissolve will not fade out clips correctly. It gets down to 10-15% opacity on the last frame and that's the lowest it goes. During playback, you can see how abrupt the fade is.
Ticking the "Composite in Linear Color" sometimes improves it, but it's still not a smooth fade. Why is it that I can manually add opacity keyframes to fix this problem (regardless of "comp"), but cross dissolve cannot do a smooth fade?
The following are screenshots of the last frame before the clip ends. The cross dissolve is 30 frames long.My system is i5, 560GTX, CUDA enabled, PP CC 7.2.1, Windows 8.1.
-White background, last frame, Composite not enabled:
-White background, last frame, Composite ENABLED:
With a white background, comp enabled is a bit better, but you can still see the content. I'd expect another frame or two before a complete fade. Black background, last frame, Composite not enabled:
Again, I'd expect another frame or two before total darkness. Oddly enough, after adding and deleting opacity keyframes and switching comp on and off, I managed to get a nice smooth fade with comp OFF with the above example. Some kind of bug? Can't seem to duplicate it yet.Black background, last frame, Composite ENABLED:
With the default black background, having comp enabled makes it WORSE. This has been happening since 2011, here's a thread over on the Creative Cow forum talking about the same issue: (and I know there's threads here on the Adobe forum talking about it too)URL....
View 3 Replies
View Related
Jan 6, 2014
I am trying the new audio sync feature in Premiere CC. I am highlighting audio from videoclip and audio from my external harddisk audio recorder. I can press the merge, but cannot choose the "sync by audio" option. I can also not choose the "synchronize" option from the list, as it is geryed out.
Anoter smaller issue , is that i have not figured out how to view the waveforms, i have solid color blocks.
View 6 Replies
View Related
Apr 21, 2014
I can't get any audio to play while in Premiere Pro. The computer's programs has audio in the speakers and headphones with everything but Premiere, including exported premiere files but I'm not sure why. It was fine just two days ago.
View 3 Replies
View Related
Mar 30, 2014
I'm using Pr CC on a Win7 64bit Dell Precision M6700 laptop. I've shot and edited a number of interviews sans problemo but today I'm having problems with outputting a simple edit with audio and video in sync using the h.264 Youtube 720 preset. It's not terrible but enough to grate on the nerves! I attach a screen shot of both my video and audio setting. I've tried both 1 and 2 pass and plain cbr. It's now 2 in the morning CET, I'm knackered and I'm meeting the client first thing.
View 3 Replies
View Related
Nov 29, 2013
I am trying to record an audio track in Premire Pro CS6 and cannot seem to get it to work.
I have a USB microphone that funcations fine, I can see the levels in Premiere and it reconds well in other programs. When I sletect my track for recording I can see the levels in the Audio Mixer, but when I press Record then Play the levels do not transfer over to the Master track and after I stop recording the audio does not get tracked, it was like it didn't record.
I have followed the steps in this article: [URL]
View 2 Replies
View Related
Dec 9, 2013
I have Premiere CC7.1 and am having problems playing back the audio after importing a synced sequence from Plural Eyes. The wierd thing is that everything plays back beautifully until I close Premiere. When I reopen the program, I see the audio on the timeline and it plays back in the source monitor but there's no audio in the program monitor.
View 3 Replies
View Related
Apr 1, 2014
I'm using Premiere CS6 and I have a AVI file that loads video just fine, but no audio. In windows movie maker, the same file loads audio, but no video. VLC Player can play the file perfectly (audio and video) so I clearly have the right codecs installed.
I ran a program called gspot on the file, and it identified the video codec as "xvid", and the audio codecs as - "ac3 (0x2000) Dolby Laboratories, Inc". Is it possible to just point adobe to whatever codec VLC is using? I copy this "ad2ac3dec.dll" file into the root premiere pro directory. But it didn't work for me (I put the dll in my Adobe/Adobe Premiere Pro CS6 directory).
View 14 Replies
View Related
Dec 3, 2013
audio clips, usually less than 20 seconds, are now being cut off at the last few seconds of the clip. Can't figure out wny it is happening or how to correct it. If I select Edit, Play Original, I can hear the full clip.
View 1 Replies
View Related
Mar 15, 2014
I am not getting the keyframes on my Audio graph: A1, A2, or A3. I want to be able to fade out parts from my audio clip during the editing process and also tweak the audio levels at various points during the editing. How can I get the keyframes to appear back near my audio waves?
View 1 Replies
View Related
Jul 3, 2013
So today I was editing and I finished, so I tried to render it so I can have in a .avi. But once I rendered it I got no errors or nothing. So I went to the desktop were it should have been placed, I loaded it and it didn't render properly after a couple of secs the music stops playing and I didn't get the glow effects or the full edit. How do I fix this tell me if you need sertain information.
View 6 Replies
View Related
Dec 13, 2013
I have several business partners that are supplying me with .mp4 files from Adobe live flash media encoder, using the h.264 codec, but the only audio choice is for an MP3 codec. this combination displays/plays no audio in Premiere Pro CS5. Only after I use handbrake to convert the audio to the AAC codec with it play in the Timeline.The upgrade to the main concept plug-in for AFMLE will allow for this, but the business partners are reluctant to spend the $ .is CS6 compatible with the default of FMLE with h.264 and the .mp3 audio? if so I will upgrade.
View 1 Replies
View Related
Mar 14, 2014
I have a timeline of about 40 minutes long with several audio tracks and sounds, some mp3 from you tube and some recorded on the shooting day. everything sound just fine in premiere, I even exported one part of the timeline as a seperate movie and it was o.k. the problem is when I've import the hole track some of the audio tracks were missing/silent. it happend in 2 different projects.
I'm on windows 7 premiere cc update to latest version...
View 4 Replies
View Related
Apr 17, 2014
Move my audio track (along with my video) down the timeline a bit and have the (audio) keyframes move with it.
What I'm doing exactly is:
- Select the Timeline Panel and Ctrl A (Select All)
- Then, click on my mouse on the selected area and drag/move the media down the timeline a bit
- All media moves fine BUT, the keyframes in my audio track A2 does not move
The video keyframes I have move just fine.
The audio on A2 is currently checked as Track Keyframes. I tried selecting Clip Keyframes, but no difference when moved; the keyframes stay at the same original place.
Is it even possible to do what I need to achieve ... or do I have to redo my keyframes manually as Clip Keyframes?
View 2 Replies
View Related
Jan 22, 2014
We've got some Sony XDCam footage coming into Premiere in a .MXF container. Playing back the audio yields a very 'crunchy' distorted sound. 'S' sounds sound lispy and there is generally a lot of additional noise.Opening these files in Sony Vegas doesn't have any audio problems at all, everything sounds fine which leads me to beleive that Premiere is the problem.
However, I've tried exporting audio from Sony Vegas to re-sync with the clips in Premiere, but the audio STILL sounds distorted and crunchy.Opening the audio in Audition ends up being a little better, but still not as clean as how the original audio sounds in Sony Vegas.
Here are all the details I've got for ya:
- Audio recorded in 3 channels, 2 stereo channels from the on board mic and 1 channel through a boom mic (The Sony cams handle up to 8 channels)
- Footage was ingested through Prelude and renamed when copied. (The actual files were not renamed, only the metadata that Prelude tags onto the clips)
- We are working on PC machines (Windows 8) as well as Mac (OS Mavericks) and ALL machines are having the same problem.- We experience the same problem regardless of whether the files are stored on our network NAS or locally
- We are all on the latest version of Premiere CC 7.2.1 (4)
I suspect that it has to do something with how Premiere is decoding the audio from the .MXF clips. Sony apparently decodes it just fine, which makes sense since the Cameras are Sony cams to begin with.I am now noticing that ALL audio in Premiere is experiencing this same effect! Regardless of container/codec.
View 1 Replies
View Related
Mar 23, 2014
I'm making a video with Premiere Pro CS5.0 in Windows 8.1, from footage from an HD camcorder with a 5.1 microphone. When I make the basic sequences, the 5.1 sound is preserved. My New Sequence Settings include: Master track type:5.1, Mono tracks:0, Stereo tracks:0, 5.1 tracks:1, Submix tracks: all zero.
However, when I create a Master sequence (same settings) and drop a basic sequence onto it, the sound appears onto a new Audio 2 Stereo track, although the initial Audio 1 and Master tracks are showing as 5.1.
View 1 Replies
View Related
Apr 10, 2014
since I updated my Mac OS to 10.9.2, my Adobe Premiere Pro CS6 has a problem: when I import MTS-files (AVCHD) from a Sony video camera, I get the video, but I don’t get the audio! That’s strange, because when I import other video formats like mp4, everything is fine, and I get video AND audio.
I also tried Premiere CC test version, but there’s the same problem.
Before my update I had Mac OS 10.6 and Premiere worked fine.
View 2 Replies
View Related
Mar 4, 2014
Using Premiere cs6.Audio keeps dropping out during playback. Audio is present in the export.The audio drops out at random and drops back in at random.
I have tried everything from converting my wav to an mp3/aiff, moving my cache and preview files (and changing my scratch locations) to my computer from my external hard drive, creating a new project, deleting the pek files, even closing all apps.
This is something that just started happening out of nowhere in the middle of a project and has gotten worse and worse with use.
View 7 Replies
View Related
Dec 4, 2013
the original clip is visible perfectly fine,however the edited version now just looks like three coloured bricks instead of an image, and in the preview is simply a blank screen. I can export the clip and view it fine that way, however the quality is much lesser.I'm about to give up on this entirely.
View 1 Replies
View Related
Aug 13, 2013
I'm new to video editing and I have been using Final Cut Pro X but I have Premier as part of my Creative Cloud Subscription so I want to give it a try.
I have some footage from a Panasonic camera which has imported fine into Final Cut but when I try to import into Premier I don't get any audio.
I'm using the media browser and I've copied the full contents of my card and like I say it does work in Final Cut.
View 5 Replies
View Related
Dec 5, 2013
I was working on a project last night and without warning, every time I tried to transfer a movie clip to a sequence, the audio stopped coming with the video. The sound definitely works and plays in the upper left hand window, but when transferring the clip to the sequence, the audio did not come with it. Before starting work on the project, I updated Premiere through the Creative Cloud.
This problem has happened before at the beginning of a project, and I have been able to start a new sequence without problems. This morning, however, when I tried a new sequence, the sound would not come in at all. A picture of what my screen looks like when I try to put in a video clip to a sequence is below.
The settings for the audio are the same between the video and the sequence. I definitely don't want to lose the ability to add sound when I get further into my project. What can I do to fix this?
View 5 Replies
View Related
Jan 30, 2014
And also displaying weird. I believe it's a preference setting but I'm not sure what.
View 9 Replies
View Related
Dec 9, 2013
I'm trying to replace the audio of a clip. I know I can easily delete the audio once it's in a sequence, but I'd like to replace the audio entirely so that the new audio is always on the clip as it's viewed in the project bins. You can edit in Audition for the clip, but thre doesn't seem to be a way to save the changes.
View 3 Replies
View Related
