Premiere Pro :: Audio Is Splitting Into Two Channels?
Jan 30, 2014And also displaying weird. I believe it's a preference setting but I'm not sure what.
View 9 Replies
ADVERTISEMENT
Premiere Pro :: Modify Audio Channels From The Timeline In CC.1?
Jun 30, 2013Why have we never been able to modify audio channels once a clip is added to a sequence? I'm guessing there's a good reason Adobe has never had this feature. The lack of this feature is explicitly mentioned a few times in the audio section of the Premiere Pro CC manual, as if it's a benefit NOT to have it. But the benefit is entirely lost on me.
In my workflow, I synchronize my double-system video and audio before anything else. I do this in PluralEyes (and unfortunately I'll have to keep doing it this way, until PPr's sync on sound feature gets fixed—for me it's never worked).
Once PluralEyes has synched hours of footage and audio and placed it on a PLURALEYES GENERATED sequence, I import that sequence into Premiere. Note: Since I haven't gone through the step of creating a blank New Sequence, I don't get the opportunity to setup my audio channels the way I'd like in my sequence (i.e. Stereo recordings should occupy ONE track, not two. Typically these tracks come from a camcorder and are used for reference sound, or ambient noise at best, so I don't need them taking up precious real estate in my sequence).
Since PluralEyes doesn't merge my clips for me (or rather I don't want it to since I'm usually doing multi-cam sequences where I want to keep all 14, or so, tracks of audio), I have to go through the clips one by one and do a Merge Clip action once I've adjusted any minor sync issues, or determined which tracks I actually want to keep. But, and here's the key, at this stage I'm not yet 100% certain whether I'll use the nat sound or the wireless mic sound (separate audio recorder, etc). Furthermore, I don't really want to think about that at this point. After I've spent a few mind-numbing hours just ingesting files, sync and merges, I want to jump into the edit as soon as possible, before I lose all will to finish this edit. If I modify my audio channels right now, I'll lose the ability to make some creative decisions later on.
I'd like to start whacking out an assembly edit. And then after I have a rough program, I can start looking at which audio tracks (nat or double-system) I like better in each circumstance. This is where I become stumped that at this stage, I'm locked into whatever audio channels I've setup (or not) in the earliest stage of the edit, back before any media was actually on the timeline! It's at this stage, and usually only at this stage that I want to start Modifying Channels—FROM THE TIMELINE!
Feature Summary: Right-click on any clip, (master clip, sub-clip, merged, nested or otherwise) in the timeline and choose Modify > Audio Channels.
Premiere Pro :: Missing Audio Channels On Export?
Feb 6, 2014i want to render my Premiere CC (v7.2.1) project to an .mp4 file. But some audio channels are not audible in the export. They are audible when I preview the timeline, but gone after export. Some audio channels are present, but others are not.
This is a huge problem for me, since I need to finish this project. The problem appears to have started after I moved the project files over to other storage.
Premiere Pro :: How To Split Audio Tracks Into Left And Right Channels
Mar 21, 2014We are recording in two languages, one in left and the other in right channel. However, in Adobe Premiere Pro we are not able to split the track when we take up for rought cut. Both the tracks are found mixed. Since we need to maintian the split track to dubb into other languages.
View 2 Replies View RelatedVideoStudio :: Splitting Audio Track
Dec 28, 2012I decided to make the jump from X3 to X5 ultimate to give Corel a try again, actually the deciding factor for me was the included mercalli stabilization as it seems to be pretty good.
Anyway, I created about a 10 minute movie from a few videos, which is divided into many clips. Now I want to disable the audio from the video track and add a sound track. I found a nice sound track with the included auto music, but I can't figure out a way to mute the entire audio track from the video so I only hear the added music. I can only see how to do it one clip at a time. Is there a way to do all the clips at once?
I guess in hindsight I should have muted the audio from the video before splitting them into clips, but I've been used to using Vegas which allows you to mute the audio from the entire video track and thought I could do it later with X5.
Am I stuck with doing one clip at a time? Or do I have to save the movie then bring it in as one large clip then mute the audio from the video so I can replace it with a music track? the mercalli seems to work pretty good - which version it is they bundle with X5?
VideoStudio :: Splitting Audio Without Breaking Things
Nov 21, 2012I have done some interviews using a Nikon D90 (only thing at hand; build in microphone and bad audio). Now I need to clean the sound and focus on human voice – and hope the Audio Filter in VS will do the job.
If I split audio to apply filters, can I then continue to edit my project just as before – or will I break things when adding new clips, photos, titles etc.?
AutoDesk Smoke :: Selecting / Splitting / Merging Audio Tracks?
Apr 19, 2011In Smoke 2012 attempting to select two audio tracks for merging and/or splitting results in the message "two layers must be fully selected". I have the two layers are selected in the far left-hand-side of the timeline with the selection buttons. The manual is not specific either.
Conversely, selecting a stereo audio track and applying stereo 'stereo split' results in the message "At least one stereo track needs to be selected". Selection was performed, as above, with the far left-hand-side track selection box.
The point is that creating a 'new sequence' results in a single video track. When two mono audio tracks are created to accomodate the audio portion of the clips they have to be converted to stereo.
Premiere Pro :: Cannot Drag Audio Transitions Or Audio Effects To Sequences
Dec 24, 2013Have reinstalled Premiere Pro 6.0.5 because I cannot drag Audio Transitions or Effects to any Timeline sequences in my Projects. Have tried modifier keys, but to no avail.
View 1 Replies View RelatedVideoStudio :: Delete L Or R Audio Channels?
Jan 3, 2012I had a file that the L audio channel is English and the R audio channel is Chinese, so I want delete L audio channel. How can I do that? I using VS Pro X4 Ultimate.
View 3 Replies View RelatedVideoStudio :: Separate (different) L And R Audio Channels
Apr 26, 2007I need to make a video file which has different sound in the left and right channels. I have the sounds as separte files. Do I can make VS play one of these in the left channel and the other in the right channel? If it's not possible with VS, can MovieStudio do it?
View 4 Replies View RelatedPremiere Pro :: Prevent Capturing Process From Splitting Up Source Material Into Short Clips?
Feb 11, 2014Capturing: I have a continuous miniDV tape that I am capturing, but Premiere keeps interrupting the capturing and makes short multiple clips...I have tried it with both Scene Detect ON and OFF. I just want the miniDV tape to play and to have one continuous file. How do I prevent the capturing process from splitting up the clip?
View 4 Replies View RelatedAutoDesk Smoke :: Import 8 Channels Of Audio - Only First 6 Come In Correctly
Sep 27, 2013Using Extension 1, I am importing an RGB Uncompressed clip with 8 channels of audio with 7&8 a stereo pair. Only the first 6 come in correctly, the 7th channel has no audio and is not marked as a stereo channel. The 8th channel is not shown at all.
I tested the same clip in Flame 2012 and all 8 channels import correctly.
Premiere Pro :: Audio Sync In CC
Jan 6, 2014I am trying the new audio sync feature in Premiere CC. I am highlighting audio from videoclip and audio from my external harddisk audio recorder. I can press the merge, but cannot choose the "sync by audio" option. I can also not choose the "synchronize" option from the list, as it is geryed out.
Anoter smaller issue , is that i have not figured out how to view the waveforms, i have solid color blocks.
Premiere Pro :: Can't Get Audio To Play
Apr 21, 2014I can't get any audio to play while in Premiere Pro. The computer's programs has audio in the speakers and headphones with everything but Premiere, including exported premiere files but I'm not sure why. It was fine just two days ago.
View 3 Replies View RelatedPremiere Pro :: Audio Out Of Sync
Mar 30, 2014I'm using Pr CC on a Win7 64bit Dell Precision M6700 laptop. I've shot and edited a number of interviews sans problemo but today I'm having problems with outputting a simple edit with audio and video in sync using the h.264 Youtube 720 preset. It's not terrible but enough to grate on the nerves! I attach a screen shot of both my video and audio setting. I've tried both 1 and 2 pass and plain cbr. It's now 2 in the morning CET, I'm knackered and I'm meeting the client first thing.
View 3 Replies View RelatedPremiere Pro :: Cannot Record Audio In CS6
Nov 29, 2013I am trying to record an audio track in Premire Pro CS6 and cannot seem to get it to work.
I have a USB microphone that funcations fine, I can see the levels in Premiere and it reconds well in other programs. When I sletect my track for recording I can see the levels in the Audio Mixer, but when I press Record then Play the levels do not transfer over to the Master track and after I stop recording the audio does not get tracked, it was like it didn't record.
I have followed the steps in this article: [URL]
Premiere Pro :: No Audio On Timeline
Dec 9, 2013I have Premiere CC7.1 and am having problems playing back the audio after importing a synced sequence from Plural Eyes. The wierd thing is that everything plays back beautifully until I close Premiere. When I reopen the program, I see the audio on the timeline and it plays back in the source monitor but there's no audio in the program monitor.
View 3 Replies View RelatedPremiere Pro :: No Audio When Loading AVI?
Apr 1, 2014I'm using Premiere CS6 and I have a AVI file that loads video just fine, but no audio. In windows movie maker, the same file loads audio, but no video. VLC Player can play the file perfectly (audio and video) so I clearly have the right codecs installed.
I ran a program called gspot on the file, and it identified the video codec as "xvid", and the audio codecs as - "ac3 (0x2000) Dolby Laboratories, Inc". Is it possible to just point adobe to whatever codec VLC is using? I copy this "ad2ac3dec.dll" file into the root premiere pro directory. But it didn't work for me (I put the dll in my Adobe/Adobe Premiere Pro CS6 directory).
Premiere Pro :: Audio Clips Being Cut Off
Dec 3, 2013audio clips, usually less than 20 seconds, are now being cut off at the last few seconds of the clip. Can't figure out wny it is happening or how to correct it. If I select Edit, Play Original, I can hear the full clip.
View 1 Replies View RelatedPremiere Pro :: Getting Keyframes For Audio?
Mar 15, 2014I am not getting the keyframes on my Audio graph: A1, A2, or A3. I want to be able to fade out parts from my audio clip during the editing process and also tweak the audio levels at various points during the editing. How can I get the keyframes to appear back near my audio waves?
View 1 Replies View RelatedPremiere Pro :: Incompatible Audio From MP4 File
Dec 13, 2013I have several business partners that are supplying me with .mp4 files from Adobe live flash media encoder, using the h.264 codec, but the only audio choice is for an MP3 codec. this combination displays/plays no audio in Premiere Pro CS5. Only after I use handbrake to convert the audio to the AAC codec with it play in the Timeline.The upgrade to the main concept plug-in for AFMLE will allow for this, but the business partners are reluctant to spend the $ .is CS6 compatible with the default of FMLE with h.264 and the .mp3 audio? if so I will upgrade.
View 1 Replies View RelatedPremiere Pro :: Audio Missing After Export?
Mar 14, 2014I have a timeline of about 40 minutes long with several audio tracks and sounds, some mp3 from you tube and some recorded on the shooting day. everything sound just fine in premiere, I even exported one part of the timeline as a seperate movie and it was o.k. the problem is when I've import the hole track some of the audio tracks were missing/silent. it happend in 2 different projects.
I'm on windows 7 premiere cc update to latest version...
Premiere Pro :: Audio Keyframes Not Moving?
Apr 17, 2014Move my audio track (along with my video) down the timeline a bit and have the (audio) keyframes move with it.
What I'm doing exactly is:
- Select the Timeline Panel and Ctrl A (Select All)
- Then, click on my mouse on the selected area and drag/move the media down the timeline a bit
- All media moves fine BUT, the keyframes in my audio track A2 does not move
The video keyframes I have move just fine.
The audio on A2 is currently checked as Track Keyframes. I tried selecting Clip Keyframes, but no difference when moved; the keyframes stay at the same original place.
Is it even possible to do what I need to achieve ... or do I have to redo my keyframes manually as Clip Keyframes?
Premiere Pro :: MXF Audio Sounds Distorted
Jan 22, 2014We've got some Sony XDCam footage coming into Premiere in a .MXF container. Playing back the audio yields a very 'crunchy' distorted sound. 'S' sounds sound lispy and there is generally a lot of additional noise.Opening these files in Sony Vegas doesn't have any audio problems at all, everything sounds fine which leads me to beleive that Premiere is the problem.
However, I've tried exporting audio from Sony Vegas to re-sync with the clips in Premiere, but the audio STILL sounds distorted and crunchy.Opening the audio in Audition ends up being a little better, but still not as clean as how the original audio sounds in Sony Vegas.
Here are all the details I've got for ya:
- Audio recorded in 3 channels, 2 stereo channels from the on board mic and 1 channel through a boom mic (The Sony cams handle up to 8 channels)
- Footage was ingested through Prelude and renamed when copied. (The actual files were not renamed, only the metadata that Prelude tags onto the clips)
- We are working on PC machines (Windows 8) as well as Mac (OS Mavericks) and ALL machines are having the same problem.- We experience the same problem regardless of whether the files are stored on our network NAS or locally
- We are all on the latest version of Premiere CC 7.2.1 (4)
I suspect that it has to do something with how Premiere is decoding the audio from the .MXF clips. Sony apparently decodes it just fine, which makes sense since the Cameras are Sony cams to begin with.I am now noticing that ALL audio in Premiere is experiencing this same effect! Regardless of container/codec.
Premiere Pro :: Audio In Nested Sequences
Mar 23, 2014I'm making a video with Premiere Pro CS5.0 in Windows 8.1, from footage from an HD camcorder with a 5.1 microphone. When I make the basic sequences, the 5.1 sound is preserved. My New Sequence Settings include: Master track type:5.1, Mono tracks:0, Stereo tracks:0, 5.1 tracks:1, Submix tracks: all zero.
However, when I create a Master sequence (same settings) and drop a basic sequence onto it, the sound appears onto a new Audio 2 Stereo track, although the initial Audio 1 and Master tracks are showing as 5.1.
Premiere Pro :: Get Video But Don’t Get Audio In CS6 (Mac)?
Apr 10, 2014since I updated my Mac OS to 10.9.2, my Adobe Premiere Pro CS6 has a problem: when I import MTS-files (AVCHD) from a Sony video camera, I get the video, but I don’t get the audio! That’s strange, because when I import other video formats like mp4, everything is fine, and I get video AND audio.
I also tried Premiere CC test version, but there’s the same problem.
Before my update I had Mac OS 10.6 and Premiere worked fine.
Premiere Pro :: Audio Drops Out During Playback
Mar 4, 2014Using Premiere cs6.Audio keeps dropping out during playback. Audio is present in the export.The audio drops out at random and drops back in at random.
I have tried everything from converting my wav to an mp3/aiff, moving my cache and preview files (and changing my scratch locations) to my computer from my external hard drive, creating a new project, deleting the pek files, even closing all apps.
This is something that just started happening out of nowhere in the middle of a project and has gotten worse and worse with use.
Premiere Pro :: Can Hear Audio But Not See Video
Dec 4, 2013the original clip is visible perfectly fine,however the edited version now just looks like three coloured bricks instead of an image, and in the preview is simply a blank screen. I can export the clip and view it fine that way, however the quality is much lesser.I'm about to give up on this entirely.
View 1 Replies View RelatedPremiere Pro :: No Audio When Importing AVCHD
Aug 13, 2013I'm new to video editing and I have been using Final Cut Pro X but I have Premier as part of my Creative Cloud Subscription so I want to give it a try.
I have some footage from a Panasonic camera which has imported fine into Final Cut but when I try to import into Premier I don't get any audio.
I'm using the media browser and I've copied the full contents of my card and like I say it does work in Final Cut.
Premiere Pro :: Audio Not Transferring To Sequence In CC
Dec 5, 2013I was working on a project last night and without warning, every time I tried to transfer a movie clip to a sequence, the audio stopped coming with the video. The sound definitely works and plays in the upper left hand window, but when transferring the clip to the sequence, the audio did not come with it. Before starting work on the project, I updated Premiere through the Creative Cloud.
This problem has happened before at the beginning of a project, and I have been able to start a new sequence without problems. This morning, however, when I tried a new sequence, the sound would not come in at all. A picture of what my screen looks like when I try to put in a video clip to a sequence is below.
The settings for the audio are the same between the video and the sequence. I definitely don't want to lose the ability to add sound when I get further into my project. What can I do to fix this?
Premiere Pro :: How To Replace The Audio Of A Clip
Dec 9, 2013I'm trying to replace the audio of a clip. I know I can easily delete the audio once it's in a sequence, but I'd like to replace the audio entirely so that the new audio is always on the clip as it's viewed in the project bins. You can edit in Audition for the clip, but thre doesn't seem to be a way to save the changes.
View 3 Replies View Related
