When I try to open the material browser in Revit 2014, the screen opens. But suddenly Revit in totally doesn't work and it says 'Does not respond'When i try to close the material browser the whole program closes and my work is lost unsaved.
View 1 Replies
When I click on search, my computer opens the notepad application and the error message says "the filename, directory name, or volume lable syntax is incorrect." I cant go to the videos or the wiki directly from revit either. None of the resources on the right side of the screen are accessible. I do have the educator version of the software. I have tried to reinstall from the application, but have not uninstalled and reinstalled completely.
View 2 Replies View RelatedI am attempting to learn revit via the on-line tutorials. I have figured how put in walls, doors, and furniture. I would like to do some elevation work and I notice I have no project browser.
How do I bring up the project browser?
I'm used to work with an ortographic wireframe view and a perspective shaded view (from other 3d app), I've tried to reproduce this in Max, without much success, the problem is switching between the ortographic views, the hotkeys doesn't work properly (the camera never displays what I want after switching) and the ViewCube seems somewhat better, however, when switching views using the ViewCube, sometimes it just doesn't align perfectly with the view so the grid doesn't appear, and I need the grid on the ortho viewport.My install is fully updated. I would like to know if it's possible to make it work properly, if possible with hotkeys. I've already tried to disable the animation, it seems to work a bit, but when I switch to the back view, this bug always pops in.
View 1 Replies View RelatedI recently tried exporting an FBX file from Revit 2012 in to another 3d software as well as the FBX converter. On both occassions, the materials don't show up, nor the textures.
View 1 Replies View RelatedWhen I have a large image and I try to crop it I cannot control where the crop is to take place. Sometimes I cannot make the selection as large as I want.
I am using CS
How does the Cost parameter in materials work in Revit? I know you can set a value for a cost. But what amount of that material is the cost associated with? For example, if I set a cost 3.00 for Common Brick, is that 3.00/unit, 3.00/sq. ft., etc?
View 1 Replies View RelatedI have a problem with CS3. Since a few weeks I can't use properly "Colour Range" feature.
Especially for bright colour the Colour Range doesn't select what I want to select. For example I want to select a bright cloud and can't select it with Colour Range. Of course I checked if there is any information or I have a burn area. I use several different setting but I still have the problem.
I used 8/16 bit, Adobe RGB/sRGB
At Colour Range I use:
- Sampled colours
- Selection
- Fuzziness: how much I need it
- Selection preview: None
I'm using ACAD (2011) most of the time in 3D. I like to work that way and it goes really fast!
Now, sometimes I want to flatten my 3D drawing and show my obscured lines and make them dashed afterwards. With the flatten command and explode it works fine... but... some lines just move! For example, a block with size 100,200,100 turns into a square with size 100.9 x 199.3, even if I use the command in 100% top view!
As what the title says, inputting Chinese characters in Illustrator CC on Mac is not possible. Is there any way to fix this besides waiting for Adobe to release a patch?
View 4 Replies View Relatedin print module main window for image control (not preview window in the left upper corner) is blank. what is the reason and how can be remedied? os Mac Lion 10.7.3 lightroom 4 ( the 3-rd version had the same problem)
View 8 Replies View RelatedIf I have elements on separate levels and I use the colour range option to select the area, it works on all the levels, not just the level I have selected. That's not what I want! I only want it to select the colour range on that one level. The work around is to manually turn off other levels, but on a file with lots of levels, that can be tedious. Can this be avoided? Incidentally, magic wand works only on the selected level, but not colour range (or color range, if you are American).
View 15 Replies View RelatedThere is still an issue with making new actions that include saving for web. While recording the action, save for web functions as it should. But once the action is played, regardless of the original format the saved image should be, it gives it an html filename extension.
[URL]
I have spoken about this bug with a friend that is a computer programmer. Considering that the action is saving the file correctly, and it's only the name that is not saving properly indicates that this is a superficial error, and not an issue that would require rewriting the code completely. Also consider that this WAS functioning properly in CS5, and that this is a very easily reproducible bug.
previously i was using civil 3d 2010, now while i am using 2012. i want to create a grid of points with easting and northing. i have manually created a point but when i use array command it does not work properly. as u can see in this image.
i created point with proper values of easing and northing but after array easing northing values becomes just -19.
I made a slide show in Elements 11 that will play from elements beautifully. I have burned it to cd 3 times and still it will not open, on the same computer. Says it will not open because it is the wrong type of file. What am I doing wrong? when I open it in Elements, it is exactly what I wanted. I need a cd to play at a graduation party, but it just WON'T work..
View 1 Replies View RelatedIf I click on an eye symbol the symbol disappears, but not the elements on the screen like you should expect. There's also a weird behavior with the lock symbols. If I lock a layer, I can click the paths anyway. The lock symbols doesn't work anymore. The whole layers palette is useless now. I tried to remove the whole "Adobe Illustrator 17 Settings" folder, but that had no positive effect.
View 11 Replies View Relatedi'm using 3ds max 2014, i'd recently installed it, and i've problems with the "conform" tool in the graphite modelling tools. i select the mesh i want to draw on, but the tool doesn't fit my mesh how i want, it just move it around the viewport with no sense. Iwas working in 3ds 2012, and it never happend
View 6 Replies View RelatedI don't know what went wrong with that View. I can create polygon planes properly in all views but top view.What can I do to make it function again when I set up the Project.this problem occurs everytime when I set up Image Planes for the top, side and front view. URL...
View 2 Replies View RelatedI purchased LR 5 last week but the start button in the presentation mudule doesn't work properly. I get a black screen and nothing happens. I have to press the esc button several times to return to LR.
View 4 Replies View RelatedI just download my Revit 2012 and the Project Browser does not show options for Elevations and Sections.It only shows Floor Plan and Ceiling Plans.When trying to bring Windows or Door, it says it is not loaded. It asking if I want load it. Well! The next step has 20 something options but nothing to do with Windows or Doors. How to get out of this Nightmare?
View 9 Replies View RelatedWhen using the block editor to rename an existing block to clean that instance of the block name out of the file, the block replace command from express tools does not work.
I select a block enter block editor save block as (new Name) save and exit block editor.Insert new block into the drawing.Express tab on the ribbon select Replace Block select block A to be replaced by Block B purge out instance of block A after complete. It reports 0 blocks replaced
attached is a file with 2 blocks called Drain and Drain X each have the same visibility states I want to replace Drain with Drain X to purge out Drain from my file.
On AutoCAD 2010, my x-ref does not load properly on one file and does on another one, detach it does not work.
View 1 Replies View RelatedHave just installed Revit 2014. Material editor will not open with icon (Manage>materials) or Type Props>Edit Assembly>Material. Additionanl Setings>Material Assests is greyed out. I have gone back to a project where I know the Asset Library is loaded as well as trying in one of the new sample files. Additionaly means I cant add or change any layers in Edit Assembly.
View 1 Replies View RelatedI have a drawing model where I cannot create a filled region in one sheet, but on other sheets in the same model I can. the filled region appears but does not mask anything - it is transparent. Transparency is set correctly (to zero) and I have tried bringing it to the front.
Running Revit LT 2014 with latest update.
I opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies View RelatedUsing Revit 2012 Architecture (64-bit) and Revit 2013 (full version, 64-bit) both gave the same problem.The problem is as follows.I have gotten a Revit file from my university and I need to make a schedule for two type of windows that consists of Family, Type, Count, Cost, and Total cost. This is not really a big deal, just add the parameters to a schedule, sort by family and type, uncheck "itemize every instance". Then create a calculated value called "total costs" with formula "cost" and type set to currency. Then in formatting go to the just created "total costs", check calculate totals and click ok.
Now there should be a schedule with the family, type, count, costs and total costs. But costs stays black and therefore total costs is 0,00.To my knowledge windows have a certain cost associated with them that comes from a database that has values for all structures in revit. So my guess is that database isn't there or for some reason it doesn't work.The file is 100% reliable, since my university supplied it to me and it works for others using the same version of Revit. Also this problem does not only occur with this file or just windows, the cost fields always stay blank. As mentioned the problem occurs on both Revit 2012 architecture (64-bit) and Revit 2013 (full version 64-bit).
In "Categories" of the filters window, it can be selected things which composes its mass, such as Mass Exterior Wall, Mass Glazing, Mass Roof. And these things can be clicked only after its mass become energy model.
I set up a filter rule of Mass Roof and applied it to V/G Filters of a view, but it did not displayed in Analyze Mass Model, the same as Mass Exterior Wall, Mass Glazing.
how to add custom browser views to the project browser window. See the attached image
View 1 Replies View RelatedI have photoshop 7 and all of a sudden it will not display my file browser properly, and if I try to expand it by clicking on the cross next to desktop it says there is a program error, is this due to a virus ??
View 9 Replies View RelatedI have just downloaded AutoCAD Architecture 2014 and am finding the materials editor difficult as I am used to using the 2010 materials editor. Is there a way of changing the editor back to 2010 or is there a basic tutorial available on how to use the 2014 material editor?
View 1 Replies View RelatedAutocad Architecture 2014
My content browser is being finicky. The palettes are there, I can select the I-drop but when I release the dropper in my file, nothing happens, no error, no content???
Is it possible to unload and reload just the content browser?
