I'm used to work with an ortographic wireframe view and a perspective shaded view (from other 3d app), I've tried to reproduce this in Max, without much success, the problem is switching between the ortographic views, the hotkeys doesn't work properly (the camera never displays what I want after switching) and the ViewCube seems somewhat better, however, when switching views using the ViewCube, sometimes it just doesn't align perfectly with the view so the grid doesn't appear, and I need the grid on the ortho viewport.My install is fully updated. I would like to know if it's possible to make it work properly, if possible with hotkeys. I've already tried to disable the animation, it seems to work a bit, but when I switch to the back view, this bug always pops in.
When I have a large image and I try to crop it I cannot control where the crop is to take place. Sometimes I cannot make the selection as large as I want.
I have a problem with CS3. Since a few weeks I can't use properly "Colour Range" feature. Especially for bright colour the Colour Range doesn't select what I want to select. For example I want to select a bright cloud and can't select it with Colour Range. Of course I checked if there is any information or I have a burn area. I use several different setting but I still have the problem.
I used 8/16 bit, Adobe RGB/sRGB At Colour Range I use: - Sampled colours - Selection - Fuzziness: how much I need it - Selection preview: None
I'm using ACAD (2011) most of the time in 3D. I like to work that way and it goes really fast!
Now, sometimes I want to flatten my 3D drawing and show my obscured lines and make them dashed afterwards. With the flatten command and explode it works fine... but... some lines just move! For example, a block with size 100,200,100 turns into a square with size 100.9 x 199.3, even if I use the command in 100% top view!
As what the title says, inputting Chinese characters in Illustrator CC on Mac is not possible. Is there any way to fix this besides waiting for Adobe to release a patch?
in print module main window for image control (not preview window in the left upper corner) is blank. what is the reason and how can be remedied? os Mac Lion 10.7.3 lightroom 4 ( the 3-rd version had the same problem)
If I have elements on separate levels and I use the colour range option to select the area, it works on all the levels, not just the level I have selected. That's not what I want! I only want it to select the colour range on that one level. The work around is to manually turn off other levels, but on a file with lots of levels, that can be tedious. Can this be avoided? Incidentally, magic wand works only on the selected level, but not colour range (or color range, if you are American).
There is still an issue with making new actions that include saving for web. While recording the action, save for web functions as it should. But once the action is played, regardless of the original format the saved image should be, it gives it an html filename extension.
[URL]
I have spoken about this bug with a friend that is a computer programmer. Considering that the action is saving the file correctly, and it's only the name that is not saving properly indicates that this is a superficial error, and not an issue that would require rewriting the code completely. Also consider that this WAS functioning properly in CS5, and that this is a very easily reproducible bug.
When I try to open the material browser in Revit 2014, the screen opens. But suddenly Revit in totally doesn't work and it says 'Does not respond'When i try to close the material browser the whole program closes and my work is lost unsaved.
previously i was using civil 3d 2010, now while i am using 2012. i want to create a grid of points with easting and northing. i have manually created a point but when i use array command it does not work properly. as u can see in this image.
i created point with proper values of easing and northing but after array easing northing values becomes just -19.
I made a slide show in Elements 11 that will play from elements beautifully. I have burned it to cd 3 times and still it will not open, on the same computer. Says it will not open because it is the wrong type of file. What am I doing wrong? when I open it in Elements, it is exactly what I wanted. I need a cd to play at a graduation party, but it just WON'T work..
If I click on an eye symbol the symbol disappears, but not the elements on the screen like you should expect. There's also a weird behavior with the lock symbols. If I lock a layer, I can click the paths anyway. The lock symbols doesn't work anymore. The whole layers palette is useless now. I tried to remove the whole "Adobe Illustrator 17 Settings" folder, but that had no positive effect.
I don't know what went wrong with that View. I can create polygon planes properly in all views but top view.What can I do to make it function again when I set up the Project.this problem occurs everytime when I set up Image Planes for the top, side and front view. URL...
I purchased LR 5 last week but the start button in the presentation mudule doesn't work properly. I get a black screen and nothing happens. I have to press the esc button several times to return to LR.
I just got a newer computer and loaded autocad2012. If I use the viewcube to rotate to a front view and try to draw or dimension it only will draw on the "top" or XY coordinates while the screen is showing the xz. If I use the view tool bar and switch to the front view I can draw at will on the "front" and the ucs is showing I am drawing on the xy. How do I get the ucs to follow the view with the view cube like it does with the tool bar?
Now, I have checked the ucs settings ucsortho (1) ucsvp (1) ucsfollow (1) What else am I missing?
If I change view with the viewcube, then type ucs v. It will change the ucs to match the view. Why isn't it doing it automatically?
I just wrote a very specific python plugin for someone who uses Gimp on OSX. The plugin doesn't appear in her menus so the installation may not be correct.
1) are there accurate instructions to install python plugins somewhere (preferably in the user's Gimp profile)? Is there a need to set some "executable" flag on the file (and if so how)?
2) in case the plugin doesn't register properly due to some syntax error, is there a way to check that out? On Linux one would start Gimp form a terminal, on Windows I believe gimp-console does it, but hat is the equivalent on OSX?
3) can some knowledgeable OSX user test that my plugin works correctly (PM me a mail address where I can send the plugin)
I have and array that looks fine in model space but when viewed in a viewport from paperspace, sections of the array look like they are wiped out. Going back to model space everything looks fine. The only way I can get it to fill in is to delete the viewport and create another one. It's then fine for awhile but before long, areas are missing again. I've redone the viewport three times and it's starting to drive me nuts.
Cross dissolve will not fade out clips correctly. It gets down to 10-15% opacity on the last frame and that's the lowest it goes. During playback, you can see how abrupt the fade is.
Ticking the "Composite in Linear Color" sometimes improves it, but it's still not a smooth fade. Why is it that I can manually add opacity keyframes to fix this problem (regardless of "comp"), but cross dissolve cannot do a smooth fade?
The following are screenshots of the last frame before the clip ends. The cross dissolve is 30 frames long.My system is i5, 560GTX, CUDA enabled, PP CC 7.2.1, Windows 8.1.
-White background, last frame, Composite not enabled:
-White background, last frame, Composite ENABLED:
With a white background, comp enabled is a bit better, but you can still see the content. I'd expect another frame or two before a complete fade. Black background, last frame, Composite not enabled:
Again, I'd expect another frame or two before total darkness. Oddly enough, after adding and deleting opacity keyframes and switching comp on and off, I managed to get a nice smooth fade with comp OFF with the above example. Some kind of bug? Can't seem to duplicate it yet.Black background, last frame, Composite ENABLED:
With the default black background, having comp enabled makes it WORSE. This has been happening since 2011, here's a thread over on the Creative Cow forum talking about the same issue: (and I know there's threads here on the Adobe forum talking about it too)URL....
I 'm trying to create a window from the command panel( for example fixed) and firstly I can't create the width unless I go to modify nor can I add rails and panels.
I've just installed Corel X3. When I open a corel 12 document from my second computer, my new Corel x3 doesn't show most of the objects. Instead - it only shows "ghost" objects. I have made a print screen and it looks like that.
I need to print this drawing and I cannot get either print to PDF or print to printer working properly.
I was asked to create a local area map of the site and i used a google map image as the map. I have a paper space layout with labels and the company title block, with a raster image reference in the model space viewport, when I go to print this drawing using plot PDF the image comes out so grainy it's useless. When I plot to printer the paper space layout comes out great but only a slice of the raster image is printed.
No indication of problems can be seen in autocad's preview mode, and this doesn't happen outside of Autocad- I can open the image and have it print to PDF clearly, and I can open the image and print to printer without problems.
Here's a link that explains what the printer is doing: [URL] .......
The image is supposed to fill the whole viewport, but most of the viewport is blank.
I have my photos on a separate volume at /Volume/Users/Lightroom Photos/…
Everything works fine except when I choose "Edit in Photoshop CS6", work on the image in Photoshop then save it. It gets saved back to the same folder as the original file, but when I tab back to Lightroom it just shows a square tile with a question mark instead of the new file. Tapping on the exclamation mark reveals that Lightroom thinks the new file is supposed to be in /Users/Lightroom Photos/…
For example the dialog box might say:
“_DSC3047-Edit.tif” could not be used because the original file could not be found. Would you like to locate it? Previous location: /Users/Lightroom Photos/2012/2012-12-08/_DSC3047-Edit.tif
When in reality the original and the edit are both in /Volumes/Users/Lightroom Photos/2012/2012-12-08/ and there is not, and never was a /Users/Lightroom Photos/…
That is, something about saving back from Photoshop stripped off the "/Volumes/" from the beginning of the path. I can choose Locate and find it right where it should be and it will show up. Once it shows up the image tile shows the image but has an exclamation mark; tapping on that brings up a dialog box that says:
The metadata for this photo has been changed by both Lightroom and another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?
This is on a Mac and so /Users does exist but that maps to /Volumes/Macintosh HD/Users. I wonder if either LR or PS is confused by there being a /Users and a /Volumes/Users.
Editing in a Nik Plugin (e.g. Silver Efx) works properly, FWIW.
I am using LR4.2 and PS CS6 13.0.1 on OS X 10.8.2.
When I (as I have in Photoshop CS2,3,4,5,5.5 and 6) click in the letting menu and change the letting, it allows me to change it and then when I click enter, it jumps down to a completely different number. I set it to 200 and hit enter and it drop to 19. I change it to 200 again, it becomes 47.
I am runnning the updated version of CC on windows 7 64-bit.
There used to be a circle onscreen that you could turn to change the amount of blur. And there were lines and or oval areas that could be made bigger or smaller to influence the area of blur. And while there are still pins that can still be placed to further control the blur, they don't really work. I also have the same problem with the new lighting effects as well.
Something strange happened recently where in order for my Right-Click Menu commands to work properly, and the double click ddedit to work, I had to take the "^C^C" out of the macro. All my related variables are set correctly, PICKFIRST, DBLCLKEDIT, etc...
What is happening is, I would get a selection set, right-click, copy with base point. Normally because the selection set is there, once a base point is selected, the command ends. In this case, after specifying the basepoint, I am asked to select objects again... This goes for ALL right click menu commands. Command line input is NOT affected.
I cannot get PSE 10 organizer to work properly.......I will open the program and then click on the file drop down menu and the organizer will give me an error message that organizer has stopped working......My OS is Windows 7 on a 64 bit system and I had the computer specifically custom built to operate PSE...
I recently upgraded to LR4 (on OS X 10.7.4), but this problem was also present in the previous version.I usually move photos around using the OS X Finder (as sometimes they are outside my Lightroom catalog). To make the updates available in Lightroom I've always used the "Synchronize Folder" option. It did work perfectly for some time, but lately that is not the case.For example, here's a folder called "Parents".I added some photos to it using Finder, then tried to sync it.
Normally Lightroom would find the new files and allow me to import them. What happens here is that Lightroom wants to remove all the photos that already exist in the folder (and Lightroom catalog) and then re-import all of them + the new ones.
First I tried to select "Import new photos -> Show import dialog" and import only the new photos. That didn't work, too. (Please see the image below; however in this sample I've chosen to import/remove all of them).
As you can see Lightroom re-imports the folder as a top-level folder, but it should be a subfolder to "Other". When I try to move it manually to "Other" I get an error message that tells me that I can't do that as a folder with the same name is already there.
I purchased and upgraded to Lightroom 4.0. Got things to work fine with some ACR updates for Photoshop CS3 that I'm currently using. Now have ACR 4.6 installed (the latest for my version of PS) as well as ACR 6.7.
I was able to make edits to the DNG RAW files in Lightroom 4.0 and then choose Edit in Photoshop (Command-E) and see those changes in a PSD file in Photoshop, where I could make further changes.
All of a sudden, I went to edit a photo in Photoshop and saw the original DNG file with no Lightroom edits. Some tinkering and update to Lightroom 4.1 but nothing can seem to make it show those Lightroom edits now when I go to Photoshop.
Mac OSX 10.7.3 Photoshop Lightroom 4.1 Photoshop CS3 Extended 10.0.1
Using VideoStudio X4 Ultimate 14.2.0.23 I have the following issue:
When doing a crossfade between video clips, the audio crossfades just fine in the preview of the edit screen in X4. However, after exporting to DVD 14:9 format, in the resulting MPG video the audio of the first clip correctly fades out, while the audio of the second clip doesn't fade in... it just jumps in.
