AutoCad :: 2010 LT Doesn't Print Reference Image Properly

Mar 22, 2012

I need to print this drawing and I cannot get either print to PDF or print to printer working properly.

I was asked to create a local area map of the site and i used a google map image as the map. I have a paper space layout with labels and the company title block, with a raster image reference in the model space viewport, when I go to print this drawing using plot PDF the image comes out so grainy it's useless. When I plot to printer the paper space layout comes out great but only a slice of the raster image is printed.

No indication of problems can be seen in autocad's preview mode, and this doesn't happen outside of Autocad- I can open the image and have it print to PDF clearly, and I can open the image and print to printer without problems.

Here's a link that explains what the printer is doing: [URL] .......

The image is supposed to fill the whole viewport, but most of the viewport is blank.

View 0 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Print Doesn't Match Preview Alignment Data Reference

Jul 12, 2013

I have a sheet that has several alignments data referenced and labels applied. Recently some of the alignments changed (slightly extended), I checked the sheet and all of the labels have auto updated. Everything looks good. A Print Preview looks good.

When create the print (to pdf), the alignments that changed and all the labels do not show up. Nothing changed with layers, styles, etc. I tried Synchronize and Refresh from Prospector. I can create another Data Ref but don't want to go thru all the labeling again.

Preview and pdf attached.

C3D 2012
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000

View 2 Replies View Related

AutoCAD 2010 :: Flatten Doesn't Work Properly

Oct 22, 2013

I'm using ACAD (2011) most of the time in 3D. I like to work that way and it goes really fast! 

Now, sometimes I want to flatten my 3D drawing and show my obscured lines and make them dashed afterwards. With the flatten command and explode it works fine... but... some lines just move! For example, a block with size 100,200,100 turns into a square with size 100.9 x 199.3, even if I use the command in 100% top view!

View 9 Replies View Related

Lightroom :: Print Module Doesn't Work Properly?

Jun 8, 2012

in print module main window for image control (not preview window in the left upper corner) is blank. what is the reason and how can be remedied? os Mac Lion 10.7.3 lightroom 4 ( the 3-rd version had the same problem)

View 8 Replies View Related

Lightroom :: Image Edited In Photoshop Doesn't Show Up Properly

Dec 9, 2012

I have my photos on a separate volume at /Volume/Users/Lightroom Photos/…
 
Everything works fine except when I choose "Edit in Photoshop CS6", work on the image in Photoshop then save it. It gets saved back to the same folder as the original file, but when I tab back to Lightroom it just shows a square tile with a question mark instead of the new file. Tapping on the exclamation mark reveals that Lightroom thinks the new file is supposed to be in /Users/Lightroom Photos/…
 
For example the dialog box might say:
 
“_DSC3047-Edit.tif” could not be used because the original file could not be found. Would you like to locate it?
Previous location: /Users/Lightroom Photos/2012/2012-12-08/_DSC3047-Edit.tif
 
When in reality the original and the edit are both in /Volumes/Users/Lightroom Photos/2012/2012-12-08/ and there is not, and never was a /Users/Lightroom Photos/…
 
That is, something about saving back from Photoshop stripped off the "/Volumes/" from the beginning of the path. I can choose Locate and find it right where it should be and it will show up. Once it shows up the image tile shows the image but has an exclamation mark; tapping on that brings up a dialog box that says:
 
The metadata for this photo has been changed by both Lightroom and another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?
 
This is on a Mac and so /Users does exist but that maps to /Volumes/Macintosh HD/Users. I wonder if either LR or PS is confused by there being a /Users and a /Volumes/Users.
 
Editing in a Nik Plugin (e.g. Silver Efx) works properly, FWIW.
 
I am using LR4.2 and PS CS6 13.0.1 on OS X 10.8.2.

View 14 Replies View Related

AutoCAD LT :: Array Doesn't Display Properly In Viewport

Dec 21, 2012

I have and array that looks fine in model space but when viewed in a viewport from paperspace, sections of the array look like they are wiped out.  Going back to model space everything looks fine.  The only way I can get it to fill in is to delete the viewport and create another one.  It's then fine for awhile but before long, areas are missing again.  I've redone the viewport three times and it's starting to drive me nuts.

View 5 Replies View Related

AutoCAD Architecture :: External Reference Doesn't Show?

Apr 8, 2012

I am working with files that somebody else did, I need to bring an external reference and it dosen't show up, then I check on the ref command and seems like the external reference of that file is there, I check also on the layers and they are not off or frezze, what could be the problem?

View 2 Replies View Related

AutoCAD Civil 3D :: Array Command Doesn't Work Properly

May 8, 2012

previously i was using civil 3d 2010, now while i am using 2012. i want to create a grid of points with easting and northing. i have manually created a point but when i use array command it does not work properly. as u can see in this image.

i created point with proper values of easing and northing but after array easing northing values becomes just -19.

View 5 Replies View Related

AutoCAD Inventor :: Insert BOM Into A Part Drawing That Doesn't Reference Itself?

Jun 28, 2012

This is something that I have tried to understand and find a work around since I started working with Inventor.  Is there a way to insert a BOM into a part drawing that does not reference itself?  When we create parts they are cut or machined from a designated material (size, shape, etc) which has it's own part number, one that we have to manually enter into the drawing BOM with it's description.  Is there a way to attach this raw or base material to a part file as a subordinate part that can be seen in parent assembly's BOM's?

If there is a way to attach a raw material to a ipt's BOM that can be seen at all levels above it we could explore the option of streamlining our BOM creation process.

IV 2012
Running on:
Windows 7 64 bit
12 GB Ram
Intel Xeon processer

View 9 Replies View Related

AutoCAD Inventor :: Set Pin Constraint In Stress Analyses Doesn't Function Properly

Apr 20, 2012

I've got a problem with simulating a benchframe. The frame is attached to the car's body with 4 flat braces. I now want to attach the braces to the benchframe, but leave them to be able to rotate from each other.

I have fixed them to the body using a pin constraint, which works pretty straight forward but I'm not able to get this working on the side of the benchframe. 

I have placed 4 pins, to allign the components and assigned manual contacts with "sliding/no separation" but now the whole construction doesnt move sideways in the X-direction and enormous stresses are developed because the benchframe is not deforming either. I have assigned every contact point and surfaces between the benchframe and the braces as "sliding/no separation".

View 9 Replies View Related

3ds Max :: ViewCube Doesn't Work Properly

Feb 6, 2013

I'm used to work with an ortographic wireframe view and a perspective shaded view (from other 3d app), I've tried to reproduce this in Max, without much success, the problem is switching between the ortographic views, the hotkeys doesn't work properly (the camera never displays what I want after switching) and the ViewCube seems somewhat better, however, when switching views using the ViewCube, sometimes it just doesn't align perfectly with the view so the grid doesn't appear, and I need the grid on the ortho viewport.My install is fully updated. I would like to know if it's possible to make it work properly, if possible with hotkeys. I've already tried to disable the animation, it seems to work a bit, but when I switch to the back view, this bug always pops in.

View 1 Replies View Related

AutoCad :: Unable To Print And Dimension Lines With Angle Reference

May 11, 2011

For some strange reason I can not print and dimension lines with an angle reference. I get the error "Cannot find or create the font AerialMT".

However, I have this font on my machine. Triple checked and installed it again.

View 8 Replies View Related

Photoshop :: Crop Doesn't Work Properly

Jan 10, 2006

When I have a large image and I try to crop it I cannot control where the crop is to take place. Sometimes I cannot make the selection as large as I want.

I am using CS

View 2 Replies View Related

GIMP :: Plugin Doesn't Register Properly

Mar 3, 2013

I just wrote a very specific python plugin for someone who uses Gimp on OSX. The plugin doesn't appear in her menus so the installation may not be correct.

1) are there accurate instructions to install python plugins somewhere (preferably in the user's Gimp profile)? Is there a need to set some "executable" flag on the file (and if so how)?

2) in case the plugin doesn't register properly due to some syntax error, is there a way to check that out? On Linux one would start Gimp form a terminal, on Windows I believe gimp-console does it, but hat is the equivalent on OSX?

3) can some knowledgeable OSX user test that my plugin works correctly (PM me a mail address where I can send the plugin)

View 1 Replies View Related

After Effects :: Text Doesn't Display Properly (CS4)?

May 2, 2013

when i type, this is what appears.
 
[URL]

View 4 Replies View Related

Lightroom :: Print Doesn't Show A Selected Photo And Won't Print

Oct 13, 2012

How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.

View 2 Replies View Related

AutoCAD Architecture :: When Print Viewport With Excel Table External Reference Does Not Appear

May 30, 2012

Some view-port with excel table external  reference does not appear when I print 

View 1 Replies View Related

AutoCAD Print / Plot :: PC3 Files Not Working Properly / The Plotter Configuration Cannot Be Found

Nov 8, 2012

In the process of releasing 2013 to the office. We have about 60 machines being loaded, varying from 64-bit Win 7, 32-bit Win 7 and 32-bit Win XP. I have gone through and created new PC3 files for our two KIP printers (3000 & 7000 series). I added one custom page size to each to create a PMP that goes along with them. These files have been placed onto a network folder for all users to access. This is where my confusion begins.

When other users go to utilize these files it is giving an error stating that "the plotter configuration cannot be found, driver cannot be found, device cannot be found, yada yada. The none has been substituted."

So we began to look at the PC3 files and see what the issues are. When the same file on the Server is copied down to a local machine it changes back to a KIP10 driver down from a KIP11 driver on the network. Make Sense?

In order to fix I began running the "Add-A-Plotter Wizard" on the local machine. Created a new PC3 wiih a different name and went back into the program. Now the PC3's that did not work before WORK.

In short, since the 2013 version has a new file format do we have to run the "Add-A-Plotter Wizard" on all local machines before the standard PC3 file will work effectively? Or does having 2011 version still on the machines have an effect on these files?

Win 7 Pro 64-Bit - Dell T1600
Intel Xeon 3.30Ghz
8Gb RAM
Civil 3D 2013

View 1 Replies View Related

Photoshop :: Color Range Doesn't Work Properly In CS3

Oct 19, 2008

I have a problem with CS3. Since a few weeks I can't use properly "Colour Range" feature.
Especially for bright colour the Colour Range doesn't select what I want to select. For example I want to select a bright cloud and can't select it with Colour Range. Of course I checked if there is any information or I have a burn area. I use several different setting but I still have the problem.

I used 8/16 bit, Adobe RGB/sRGB
At Colour Range I use:
- Sampled colours
- Selection
- Fuzziness: how much I need it
- Selection preview: None

View 1 Replies View Related

Revit :: Xref Doesn't Load Properly On One File

Aug 9, 2011

On AutoCAD 2010, my x-ref does not load properly on one file and does on another one, detach it does not work.

View 1 Replies View Related

Illustrator :: Chinese Input Doesn't Work Properly In CC (Mac)

Nov 17, 2013

As what the title says, inputting Chinese characters in Illustrator CC on Mac is not possible. Is there any way to fix this besides waiting for Adobe to release a patch?

View 4 Replies View Related

Premiere Pro :: Cross Dissolve Still Doesn't Fade Properly

Feb 14, 2014

Cross dissolve will not fade out clips correctly. It gets down to 10-15% opacity on the last frame and that's the lowest it goes. During playback, you can see how abrupt the fade is.
 
Ticking the "Composite in Linear Color" sometimes improves it, but it's still not a smooth fade. Why is it that I can manually add opacity keyframes to fix this problem (regardless of "comp"), but cross dissolve cannot do a smooth fade?
 
The following are screenshots of the last frame before the clip ends. The cross dissolve is 30 frames long.My system is i5, 560GTX, CUDA enabled, PP CC 7.2.1, Windows 8.1.
 
-White background, last frame, Composite not enabled:
 
-White background, last frame, Composite ENABLED:

With a white background, comp enabled is a bit better, but you can still see the content. I'd expect another frame or two before a complete fade. Black background, last frame, Composite not enabled:

Again, I'd expect another frame or two before total darkness. Oddly enough, after adding and deleting opacity keyframes and switching comp on and off, I managed to get a nice smooth fade with comp OFF with the above example. Some kind of bug? Can't seem to duplicate it yet.Black background, last frame, Composite ENABLED:
 
With the default black background, having comp enabled makes it WORSE. This has been happening since 2011, here's a thread over on the Creative Cow forum talking about the same issue: (and I know there's threads here on the Adobe forum talking about it too)URL....

View 3 Replies View Related

Photoshop :: Selecting With Colour Range Doesn't Work Properly

Sep 18, 2012

If I have elements on separate levels and I use the colour range option to select the area, it works on all the levels, not just the level I have selected.  That's not what I want!  I only want it to select the colour range on that one level.  The work around is to manually turn off other levels, but on a  file with lots of levels, that can be tedious.  Can this be avoided?  Incidentally, magic wand works only on the selected level, but not colour range (or color range, if you are American).

View 15 Replies View Related

Photoshop :: Recording Save For Web In Action Still Doesn't Work Properly In CS6 13.0.1?

Aug 31, 2012

There is still an issue with making new actions that include saving for web. While recording the action, save for web functions as it should. But once the action is played, regardless of the original format the saved image should be, it gives it an html filename extension.
 
[URL]
 
I have spoken about this bug with a friend that is a computer programmer. Considering that the action is saving the file correctly, and it's only the name that is not saving properly indicates that this is a superficial error, and not an issue that would require rewriting the code completely. Also consider that this WAS functioning properly in CS5, and that this is a very easily reproducible bug.

View 3 Replies View Related

CorelDRAW Graphics Suite X3 :: SE Doesn't Show Some Of Objects Properly

Apr 20, 2011

I've just installed Corel X3. When I open a corel 12 document from my second computer, my new Corel x3 doesn't show most of the objects. Instead - it only shows "ghost" objects. I have made a print screen and it looks like that.

View 14 Replies View Related

Revit :: 2014 Materials Browser Doesn't Work Properly

Oct 8, 2013

When I try to open the material browser in Revit 2014, the screen opens. But suddenly Revit in totally doesn't work and it says 'Does not respond'When i try to close the material browser the whole program closes and my work is lost unsaved.

View 1 Replies View Related

Photoshop Elements :: 11 - Slideshow Exportation Doesn't Work Properly

May 27, 2013

I made a slide show in Elements 11 that will play from elements beautifully. I have burned it to cd 3 times and still it will not open, on the same computer. Says it will not open because it is the wrong type of file. What am I doing wrong? when I open it in Elements, it is exactly what I wanted. I need a cd to play at a graduation party, but it just WON'T work..

View 1 Replies View Related

Illustrator :: Layers Palette Doesn't Work Properly Anymore?

Feb 26, 2014

If I click on an eye symbol the symbol disappears, but not the elements on the screen like you should expect. There's also a weird behavior with the lock symbols. If I lock a layer, I can click the paths anyway. The lock symbols doesn't work anymore. The whole layers palette is useless now. I tried to remove the whole "Adobe Illustrator 17 Settings" folder, but that had no positive effect.

View 11 Replies View Related

VideoStudio :: When Cross Fading Video Sound Doesn't Fade In Properly

Jan 2, 2012

Using VideoStudio X4 Ultimate 14.2.0.23 I have the following issue:

When doing a crossfade between video clips, the audio crossfades just fine in the preview of the edit screen in X4. However, after exporting to DVD 14:9 format, in the resulting MPG video the audio of the first clip correctly fades out, while the audio of the second clip doesn't fade in... it just jumps in.

View 2 Replies View Related

Paint Shop Pro :: Editing New Layer Doesn't Refresh Properly With 64bit X6

Dec 3, 2013

I have been doing some very simple editing of photo's taking a copy from part of one and pasting it as a new layer on another photo. I can then manipulate the size, placement and orientation easily with my X4 version of PSP.

I just purchased the new x6 and am ASTONISHED that this simple exercise doesn't work at all in the 64 bit version and only partially in the 32bit version of x6. What happens is that the screen isn't redrawing the changes as you move the pasted part around. It can be refreshed manually but gets into such a mess when you are trying to place the image that it's unusable. I go back to X4 and using exact same photo's I can work without any problem.

I'm on win7 ultimate all upto date and an 8800 GTS graphics card with latest drivers. There should be no reason x4 works and x6 does not.

View 4 Replies View Related

Maya Modeling :: Creating Planes In TopView Doesn't Work Properly

Jul 31, 2012

I don't know what went wrong with that View. I can create polygon planes properly in all views but top view.What can I do to make it function again when I set up the Project.this problem occurs everytime when I set up Image Planes for the top, side and front view. URL...

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved