I just download my Revit 2012 and the Project Browser does not show options for Elevations and Sections.It only shows Floor Plan and Ceiling Plans.When trying to bring Windows or Door, it says it is not loaded. It asking if I want load it. Well! The next step has 20 something options but nothing to do with Windows or Doors. How to get out of this Nightmare?
View 9 Replies
was setting up my printing sheets when i noticed my south and west elevations are showing up as sections. how to change back to elevation views.
View 3 Replies View RelatedI want to create sections and plans showing interior finishes. As walls are all of the same structure I used the split face tool. When applying 'paint' to the face it only gives me the options of materials not fill patterns i.e. hatches. How do I get it to apply hatches or is there a visibility setting that i need to change.
View 1 Replies View RelatedIs there any way to show my detail views in my elevations?
In autocad we use a little line with the detail number, but I can't find anything like that in revit. I've attached an example.
I have a fairly simple corridor, however, I had to modify the alignment, rebuild the corridor and resample cross-sections. Now my right daylight slope won't show up. It shows up in the section viewer, but not the cross-section. I had this problem once before and fixed it, but now I can't remember how I did...I have all targets, sections sampled match corridor sampling etc.
Civil 3D 2012 SP1
Windows 7
In Revit sections, we can add split segment in plan.
How can we show the Horizontal sections in sectional view and how can we split the horizontal section such that the drop is vertical.
I know that one workaround to show vertical drop is to use plan region on the Horizontal Plan View. But is there a better way? If not is autodesk looking forward to incorporate this in further releases?
I have a large building project with multiple linked files (building split into blocks plus furniture etc models) with shared co-ordinates. All are working fine except one which happens to be a furniture and equipment model. When sections and/or elevations are placed in either the host or the linked file the views do not corrospond with the cut line of the section or view line of the elevation, for example if I place an elevation within a room the elevation looks as if it has been placed in a different position some metres away. When the files are linked within each other using the shared co-ordinates they place themselves in plan and elevation perfectly. I am trying to create room elevations to show furniture/equipment layouts and this is making it impossible!
View 3 Replies View RelatedIn my part, there was already an existing Engineering note.
I wanted to add another note. I added my new note, but it does not show up in the browser. I can right click on the note note > Display note and both notes are shown in the engineering notebook. When I exit out of the notebook and go back to Inventor, still not there. Here is a short video of what I am seeing.
[URL]. The "Rev B" noteis the original one and Note 2 is the one that I just added.
Now I if I add another note, then all of them will show up in the browser. This is not the first time that I have seen this, but just thought I would bring this up.
This part was just made with a copy design from Vault. What is weird, is that if I go to the part that this was copied from and add the note, it shows up correctly then. Its like something is getting hosed in the copy design process.
I have created new levels e.g T.O.F. & T.O.G. but they will not show up under the existing Floor Plans section in the Browser. All I get is a new section Titled: ???! How do I get these new levels to show with the rest of my levels under the floor plans category. Using Revit Ultimate 2014.
View 2 Replies View RelatedWhen I try to open the material browser in Revit 2014, the screen opens. But suddenly Revit in totally doesn't work and it says 'Does not respond'When i try to close the material browser the whole program closes and my work is lost unsaved.
View 1 Replies View RelatedRibbon has been acting strange. One example is when creating a sweep the ribbon will not show the mode options to accept or discard changes while creating the sweep path. I have to cycle the ribbon display options to show the X and check options to complete the sweep path. This is only one example of many different odd things happening.
Sometimes when I am simply drawing model lines the selection options for rectangle, circle etc do not appear until I cycle the ribbon display options. This only started in the last week or two.
Windows 7
RAC2012
I opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies View RelatedI am facing the following problem:
I’ve got a 3D model with some blocks inserted. These blocks won’t show up in 2D or 3D sections or elevations.
When I leave only the blocks on and freeze the rest of the drawing, no section is created at all (“There are no solids or surfaces that can be projected”).
None of the geometry is on the Defpoint layer. The objects are printed and DO show up in the live section preview.
Turn off sheets that are not done (but I still want the sheet layout setup in the project browser.) So that hey do not show up in the automatic index on the cover sheet.
View 4 Replies View RelatedI am working on a project with Split Levels like a Multi-level CarPark. I need to produce plans by combining two Levels which are at 3M height difference.
While using Plan Region, Some of the walls dont show as cut, though their height is more & above the Cut Plane Level.
I did find a quick solution online here - [URL] ... This trick is still not working for some of the walls..
have a good style to label cross sections at profile grade, top of curb, bottom of curb, grade breaks, and back of walks? Do I set a point or something in my assembly to use to label those points?
View 1 Replies View RelatedUsing Architecture 2012 and seem unable to get a column grid to show automatically in elevation views. Looks fine in plan view, bubbles etc all working once we sorted out annotative setting .
View 3 Replies View RelatedI designed an upholstered furniture with curved surfaces. When I generate sections or elevation I'll see the invisible edges on curved surfaces! Is there a way to get the same result as the object viewer hidden line (or shaded with edges)?
2nd question. is there a way to control how many steps the surfaces are tessellated? The outline is not very smooth!
Top View
Elevation (too many edges visible)
Result of the object viewer.
I'm trying to set up a height label for sections and elevations. I then want to update it with a shortcut.
I already tried it with a field that shows me the y coordinates, but it won't show me the "+-"0.00 sign,when I put it to zero level. It only writes "0.00".
how to add custom browser views to the project browser window. See the attached image
View 1 Replies View RelatedMy content browser doesn't have the original options it used to have, instead it has a customized version. But the customized version does not have anything in it. How do I get it back? No matter where I search in CAD or in my files I can't find the original. Do I have to uninstall and install the program again?
View 2 Replies View RelatedI'm currently working on a profile and I just don't understand why my profiles barely show any stations. It doesn't even show the very first station. I remember checking on a box that mentioned showing the 1st station and still nothing. I've gone into the edit band style and turned on the labels at minor stations but it just turned on the FG/EG elevations.
I've added a picture showing what i'm talking about. It only shows stations 31+00 and 32+00. Not 30+00 or the 50' increments. Also, while I'm on the subject. How do I get something proposed into this existing profile to show FG Elevations. Example if I just wanted to strike a straight line from 30+00 to the end where the elevation is a 91' & 86'.
HP Compaq 8100 Elite
Win 7 Pro SP1 - 64Bit
8GB RAM
i7 860 @ 2.80 GHZ
AutoCad Civil 3d 2012 SP1
We have conducted a 6" x 6" grid survey of a building's finished floor and the client has requested the output drawing of the point file survey to be shown in Millimeters. The Point Label style in Civil 3D 2009 only has the option to show Meters which isnt precise enough for the clients wants. I am using the metric template in autocad Civil 3D and all units are set to metric.
Is there a way to change you point label to show Millimeters?
I am using Civil 3D, Update 3
Is there a way to have the sections of left/right panels open automatically when mouse is hovered on them? They close automatically when I go to use another section...collections instead of files, eg. But then I have to open section again manually when going back. Very tedious. At the least, is there a way to lock a section open?
View 1 Replies View RelatedIt is almost seeming like you should not try to creat these views in templates to get a jump start on projects. but for the life of me I am not understanding how you can get level lines to appear elevations that have already been create. or in new ones?is there away to successfully get these back?
View 3 Replies View RelatedSeveral buildings are linked and share coordinates. How can the host file be used as the datum base Finish Floor 0 and all the other buildings relate, even though at different elevations of floor levels? Right now the sections show FF 0 for all of them and they are at different heights.
View 1 Replies View RelatedThis and other elevations have lines between new and existing walls/soffits. Joining doesn't eliminate the line. The existing wall is also in a group.
Is there any way to selectively hide an edge in an elevation?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
When I open a number of templates, I will see a Basement Plan, however when I go the the Elevations I do not see a Basement Level.How do I add the Basement Level to the Elevations ?
View 5 Replies View RelatedI've been away from Revit for awhile. Isn't there an easier way to edit lines in elevations without creating dozens of masking regions to hide model lines from walls, roofs etc.?I thought in older versions, (I'm currently on 2012), that you could just select lines to make them invisible.
View 1 Replies View RelatedI am trying to generate counter elevations from my Revit Model. I am designing a coffee bar area and have developed a Revit family for a "U" shaped counter. In trying to set up my elevation, I notice my elevation views of the inside right or indise left of the "U" shaped counter are blocked by the opposite leg of the counter.
Also, I am trying to generate an elevation of my rear support counter and it seems to be blocked by the bottom of the "U" shaped counter. I have attached a sketch of the plan view of where I have set up my elevation views.
How do I edit the points in the toposurface programatically? Like the elevations all increase 2 times the original one.
View 3 Replies View Related
