AutoCAD Civil 3D :: Cross Sections - Labeling Offset And Elevations?

Mar 28, 2013

have a good style to label cross sections at profile grade, top of curb, bottom of curb, grade breaks, and back of walks?  Do I set a point or something in my assembly to use to label those points?

View 1 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Labeling Existing And Proposed Grades In Cross Sections?

Mar 14, 2012

I am trying to get the existing and proposed grade from my surfaces to show up in the center bottom of my cross sections.  I am working with the CL elevations band style and trying to set up so that major and minor increments are the surface elevations.  Am I going about this wrong?  I went in to the compose label tab and selected for the text to be section 1 elevation and section 2 elevation.  When I am at the section view properties box / bands tab, all that shows up is my existing surface.  I have created sample lines and a corridor.  I have also created a surface from the corridor. 

View 1 Replies View Related

AutoCAD Civil 3D :: Offset Start Corner Of Cross Sections?

Mar 11, 2013

How do you Offset the START CORNER of Cross Sections. I see where you can chose, Bottom Left, Top Left, etc...

I need to move the START CORNER Down and Left. See Attached.

View 5 Replies View Related

AutoCAD Civil 3D :: Cross Sections - Creating Report Of Offset And Elevation

Apr 28, 2013

I have some cross sections showing existing and finished grade. The finished grade is a channel and floodplain with slopes to catch existing ground. I’d like to create a report of the offset and elevation at each grade break for the finished grade. Optionally, it could be offset and cut or fill at each grade break. I’ve found the tool to create annotation for the offset and elevation info, but the cross sections are too small on the drawings to accommodate all that text. Is there a way to generate a report for the section view group or even each section view that would contain that information?

View 1 Replies View Related

AutoCAD Civil 3D :: Export Offset / Elevation Data From Cross Sections To Text File / Excel

Jun 9, 2010

I am using Civil3D 2010. I am trying to export the offset/elevation data from my cross sections to a text file or excel file so i can paste the info into another program. so far i've been labeling the offset/elevation info on the section and typing it into excel by hand.

View 9 Replies View Related

AutoCAD Civil 3D :: Labeling Centerline Existing Ground & Profile Grade Elevations?

Mar 28, 2012

I am trying to label existing ground & profile grade on my cross-sections the way old Land 4 used to do it.  I've muddled through section view property style settings, band settings, group properties w/no luck.  It can't possible be this difficult.  What am I missing?

View 5 Replies View Related

AutoCAD Civil 3D :: Existing Cross Section Slope Labeling For Corridor?

May 4, 2012

how to have exisitng cross slopes display on a bank of corridor cross sections...I see lots of posts on this but I am having trouble finding the answer.  The link below from Add a section view grade label only adds "A" slope label.....I want all of them in all of my sections.

[URL]

View 6 Replies View Related

AutoCAD Civil 3D :: Cut / Fill From Cross Sections

Feb 25, 2013

I am working on a project for a park in which they are looking for a new access road and a parking lot.  I created the road and sections for it, now im looking to get material cut/fill from the sections.  I am having a tough time getting them to work.  The only thing I can get to work is if i created a volume surface comparing my eg to my fg surface.  That will give me a cut and fill material amount for my new road

What i am trying to get is the volume report for each sections, so i can get the cut/fill for each section.  I have followed the tutorials and tried everything, but nothing seems to work.  I created a surface from my corridor, and for some reason when i go to edit my materials, i cant add my proposed surface from my corridor to make the comparison from, and i think thats my problem.  Everytime i go to create my volume report, i get all 0's.

View 7 Replies View Related

AutoCAD Civil 3D :: Label Cross Sections

Jan 3, 2013

When editing the Cross Section Styles the Horizontal Axis changes do not take affect. Vertical will work as entered.

See attached image.

I am changing under the Horizontal Axes tab, on the Section View Styles Menu.

View 7 Replies View Related

AutoCAD Civil 3D :: Portrait Cross Sections Set Up

Mar 29, 2013

I am trying to set up portrait cross sections. I can get my views to create a grid and such that look correct, however when putting them on sheets, it rotate the border, but also the modelspace. Are there certain settings in the sheet creation or the dwt file I need to review to do portrait sections?

Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post

View 2 Replies View Related

AutoCAD Civil 3D :: Xrefed Cross Sections

Feb 29, 2012

I have created a drawing called xsec. I xrefed the corridor drawing into it and data shortcut the alignments in as well. I created sample lines and cut my cross sections in the drawing. Everything at this point looks fine.

The problem happens when I create a new drawing and xref the xsec into it. In this new drawing only the right side of my cross sections is showing up. I want to use this drawing for my sheet set rather than have a bunch of tabs in the xsec drawing.

View 1 Replies View Related

AutoCAD Civil 3D :: Cross Sections All Laying On Top Of One Another

Jul 18, 2013

had my cross sections ready to go all day, had to add points to my surface layer is all i did, now when i cut the sections they are all laying on top of one another.

View 6 Replies View Related

AutoCAD Civil 3D :: Material Shapes On Cross Sections?

Dec 19, 2012

I've created sections and set up Materials List with Shapes Defined (Edit Material List.jpg) but the View Group Properties do not reflect this and have to be edited to suit.

IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600

View 2 Replies View Related

AutoCAD Civil 3D :: More Sampled Cross Sections Into Existing Ones?

Oct 10, 2012

I sampled my sections at 25 feet intervals, created my section view group and them plotted my cross section sheets. All look fine.My problem is that I need to include Station 21+17.40 and some other similar stations (in-between the 25 feet intervals) into my cross section sheets without deleting the existing Sample Line Group and Section View Group. Is there a way I can sample my desired additional sections and add them to the existing Sample Line Group and Section View Group and re-plotted my cross sections?

View 1 Replies View Related

AutoCAD Civil 3D :: Cross Sections With A Surface Mask

Feb 4, 2013

We want to show two surfaces, an existing ground and a proposed ground, on a cross section. When the proposed ground meets up with existing ground, it would be nice for the line to end. With just existing ground continuing on. The surface is data referenced, and I would like to not break either of them. I thought adding a surface mask would cause the proposed surface to stop at the mask, but that doesn't appear to be the case.

View 2 Replies View Related

AutoCAD Civil 3D :: Assembly Not Showing In Cross Sections

Jan 21, 2013

I have everything needed for plotting of cross sections. Alignment, profile, assembly.

The "Corridor Section Editor" shows everything as it should be. Existing Ground, Final Grade, Labeling, etc. When "Create Multiple Views" or "Create Section View" only existing Ground shows. All layers are on.

View 3 Replies View Related

AutoCAD Civil 3D :: Create Cross Sections From Existing DWG?

Jul 22, 2013

civil3d 2012. I'm trying to find out how to create cross sections from existing ones that i have in autocad file. I allready have read for the way with offsets points, but is there a way to make full cross sections from the allready drawned?Is it possible to convert the existing lines?

View 7 Replies View Related

AutoCAD Civil 3D :: Calculate Difference Between 2 Different Cross-sections?

Feb 5, 2013

With reference to the picture attached, I am trying to find the overlapping area between two different cross-sections. I.e.the area of green minus the area of white.

The hard way to do it would be to sketch a closed polyline over the area I want but I have about 100 of these to do and more to come.

Windows 7 64-bit
Intel Core i7-3840QM 2.80GHz
NVIDIA Geforce GTX 680M 4GB
16GB RAM

View 5 Replies View Related

AutoCAD Civil 3D :: Updating Cross Sections With New Surface?

Aug 7, 2012

I have a drawing with some cross sections of road showing the Proposed road surface and Existing ground surface. Now we have received a new ground surface and we have to supersede the old ground surfae with the new one. is there any way to swap the surface in the existing cross sections?

View 5 Replies View Related

AutoCAD Civil 3D :: Corridor Not Displaying On Cross Sections

Feb 28, 2013

I have a corridor with 2 intersections. It is more or less like a main road with an off-ramp and an on-ramp, both on the same side, with a big triangle shape island in between them. It involves an existing road widening and a connection with another existing road. Since it is a real scenario, the intersections aren't perfect 90 degrees nor the offsets are constant.

Create Western intersection and change offset and curb return targets to design aligments.Create Eastern intersection and change offset and curb return targets to design alignments.Model the corridor as per design requirements.Due to design constraints, I ended up removing both intersections. I didn't delete all the offset and curb return alignments although they're not targeted on any region. Deleting this alignments seems to make C3D crash. the actual intersection definition hasn't been removed, as I read on other threads. I kept on getting a couple of error messages on Panorama Event Viewer every time I rebuild the corridor.

So, the problem comes when I try to output the cross sections from this nice looking corridor. They all look fine until they reach the intersection area. From the intersection onwards, the corridor is not displayed on any cross section. Even way passed the western intersection.

Why the corridor doesn't display on the cross sections passed the deleted intersections?I have a bad feeling that removing the intersection wasn't a good idea in the first place but it's too late now.

View 4 Replies View Related

AutoCAD Civil 3D :: Display 3D Polyline In Cross Sections

Nov 21, 2013

I am working on a project which has numerous existing conduits laid out on the site.  The location of the services has be picked up by a surveyor on the surface at numerous location and provided as a 2D polyline.  The lines are quite long with a large number of nodes.

I wanted to represent the conduits as say a 100mm pipe and locate it about 0.6m below the surface to get an idea of how it impacts my works.

I tried converting it to a network fails as there is >70 nodes.  I really only need to see the conduit on the cross section as I will definately avoid it.

Is there a way to display 3D polylines in cross sections?

View 1 Replies View Related

AutoCAD Civil 3D :: Hatch Between Surfaces On Cross Sections

Nov 25, 2013

I have multiple surfaces representing topsoil, clay and types of bedrock, and an alignment set with sample lines and sections set. Trying to use the Compute Materials using material lists and the corresponding shape style to hatch between each surface something is going wrong. With all the display settings (Plan,Section,Profile,etc) set to by layer and on a created layer(not on 0). The shape area fill is set to solid. It will not display the hatch.

View 3 Replies View Related

AutoCAD Civil 3D :: Get Cross Sections To Display Cut / Fill Value?

Apr 17, 2012

How do I get the cross sections to display a cut/fill value?

View 4 Replies View Related

AutoCAD Civil 3D :: Pipe Networks In Cross Sections

Jul 24, 2012

I am having an issue with the pipe networks drawing the pipes incorrectly in the cross sections. Whenever there is a crossing pipe running parallel with a structure, the pipe shows as a large ellipse instead of showing the pipe walls.

Some of the pipes are not running exactly parallel with the sample line, but they are pretty close. I know in the profile view you can change a setting to make a pipe show as a pipe end or as a regular pipe. Is there a setting for the cross sections as well? If not how do I get the pipes to show correctly? 

View 5 Replies View Related

AutoCAD Civil 3D :: Cross Sections (as Polylines) To Surface

Oct 30, 2012

This looks like an interesting tool

[URL]....

(No connection with Autodesk other than using the products in the real world)

IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600

View 2 Replies View Related

AutoCAD Civil 3D :: Corridor Not Displaying On Cross Sections?

Aug 20, 2013

Section editor shows the Existing Ground and the Assembly correctly. But "Create Multiple Views" Shows a blank Grid from -10 to 0..... Corridor rebuilt...

View 5 Replies View Related

AutoCAD Civil 3D :: Offset-Elevation Labels In Sections

Oct 4, 2011

I have several hundred cross sections for a surface that I need to label the major section breaks.  Civil 3D gives the option of weeding based on distance, but I want to label only the major grade breaks (i.e. more than 1%).  Is this possible, or is the only option manually labeling the section? 

View 2 Replies View Related

AutoCAD Civil 3D :: Corridor Not Fully Showing In Cross Sections?

Jul 30, 2012

I have a corridor with two baselines, one on the south side of the road, and one on the north side.  The south baseline appears correctly in the section view.  It is an asphalt bike trail with a ditch to the left side.  The north baseline was not appearing at all.  The assembly was just a ditch with nothing else.  I changed the north baseline to use the same assembly as the south to troubleshoot.  The pavement comes in, but the ditch still does not appear.

I can see the ditch feature lines on my corridor (see attached), but they are not appearing in the section view.

View 1 Replies View Related

AutoCAD Civil 3D :: Cross Sections - End Area Is Not Always Determined At Every Station

Jan 11, 2012

I am evaluating volumes of concrete removed from a surface and the volumes of concrete poured to replace the demolished concrete.I have created surfaces for each stage of the process in individual drawings.

I have created a drawing for the section views and successfully created cross-sections showing all the surfaces.When I compute materials, determining cut material between 2 of the surfaces, the end area is not always determined at every station.

I have previously noticed end area "shapes" with breaks in them. Each time, this was because there was  a void in the surface triangulation.Is there any way that I can interrogate a surface to check whether the triangulation is incomplete, with voids in it?

I posted last week and included the attached screen print showing incomplete triangulation which I only noticed by turning on the "Shades of Gray" visual style.There must be some way to check surfaces without having to use the memory gobbling visual style.

View 9 Replies View Related

AutoCAD Civil 3D :: Put Cross Sections Views In Right Place On A3 Paper?

Aug 13, 2013

put the cross sections views in the right place on A3 paper

you can see the problem in the picture(Attachments)

View 1 Replies View Related

AutoCAD Civil 3D :: Create Cross Sections In Separate Drawing

Nov 22, 2012

I want to create cross sections in a blank drawing via a Data shortcut Project.

My intent is to keep my file size to a minimum. I can include surface, alignment and profile per data shortcut but not my corridor. My corridor is 3000 feet long and when I do cross sections in the same drawing, it runs real slow.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved