why my model shows an event mean storage of 20396 cf when I don't have any storage nodes? How is the model storing that amount of water? I'm thinking this is why my total inflow doesn't match my total outflows?
View 5 RepliesWhen I try to run my hydrographs through a pond I get an error stating something to the effect of: Outflow greater than Inflow on Hydrograph 6 for the 50-yr storm.
How can the outflow be greater than what is flowing into it? How the program can calculate this.
Attached is my 1st project using SSA for detention pond design.
Where is the best place to view the results for the detention pond peak outflow and maximum HGL?
Also, the program seems to separate the results per year storm...anyway to view the results for all year storms in the same report?
how do you attach the .spf file?
2013 Civil 3D
How can I transfer (download) measured data from total stations 'Trimble' and "Leica" to AutoCAd Civil 3D 2013? Must I find a module from the sites of these manufacturers? Or how can I change from total stations formats to the Feald Book format?
View 6 Replies View RelatedAttached are two files: 1 file has 0 values on the volume table, and the other file has Sample line group Properties.
Surface 3 is the surface that has the existing actual survey points . Do I have to pick another surface : the other two are the surfaces I created in the Corridor as surface boundaries , Top and Datum
I have just created a Total Volume Table and everything is perfect in Model, but when y change to layout, the table is miising. I can barely see the title of the table zooming, but anything else. The tables are still there, but so tiny and with just the title, there is no data!
View 1 Replies View RelatedI oftenly do conception for parkings and always need to have the calculated rentention of water volume in the pipe network.is there a way to have that information with Civil 3d ?
Googled the subject and i only found a topic on trench's for the pipes ...
Cyberflow
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro
i need to guide for using sanding total station for exchange data now my question is that do there is any way in civil 3d survey menu that i can use sanding total station for exchange data?
View 1 Replies View RelatedIs there a way to add a column that would show for each elevation range the percentage of the total area?
View 1 Replies View RelatedI love the area command how you can pick multiple objects and they highlight and adds the total. I was wondering is there a way to do that same concept but with multiple objects and total it to acreage?
View 9 Replies View RelatedAngle-distance method to stake out the horizontal alignment by total station,Assuming that the total station with reflector is the tool that it is intended to lay out the circular curve after being designed then the only way to do so is to construct a table that contains angle-distance values.
I’m wondering if the C3D can provide this table (attached)
Flow segment label using total Flow Type travel time for each segment:
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
[URL]....
How to set the total scale of a mleader in C#?
In German it's called: Gesamtskalierung
I had no Problem with this....
_mLeader.LandingGap = 6;
_mLeader.TextHeight = 60;
_mLeader.MLeaderStyle = _mleaderStyleId;
but the total scale is also very important for me. I try to add a picture with a red frame so you can see what I' missing.
Is there a way to operate an offset to an entire layer?
I have a layer that has all the trees in the area. I want to do an 8 foot offset of every tree that is plotted. But there is like 2000 trees. Is there a command to do them all at once?
How Do I find the total length of several objects or separate lines without having to click on each one individually and add them up.
View 5 Replies View RelatedI have a large group of lines that I want to get a total length of. Right now the only way that I know how to do this is to highlight them all and use the list command but then I have to go through the text box and write down each line length and then add them up. This is fine if I have only a few lines but when you get into the hundreds or thousands it becomes a monster task.
I tried copying the text box data into a Word document, removing all of the text except for the line lengths and then dumping that into Excel to calculate. This works ok for a hand full of lines but is not really practical.
I know that there are LSP routines that can do this in the full version of AutoCad but LSP is not supported in AutoCad LT.
Is there a way to automate this process in LT?
Or maybe extracting just the length data from a line to a text file where I can send it to Excel and use Excel to add up the lengths?
I want to know if it is possible to calculate the water displacement volume of an assembly if it were immersed in water.
In other words, I want to create a file in which ALL hollow spaces inside structural members, valves, pipework etc are assumed to be solid so that when that assembly is dropped in water, the total volume of water being displaced will be equal to the iProperty value for volume. I know its possible to hole patch when creating a shrinkwrap, but this is only effective for 'circular' hollow spaces and does not fill obscure or rectangular shaped empty volumes.
how to calculate the total length of walls.... by one command or i just calculate it one by one.....
View 4 Replies View RelatedI have a building like this and it has a lot of windows.
I know how to calculate an individual window area by using 'area' or 'ls' command. But this is just partial drawing and the whole building has hundreds of windows and it will take forever to calculate one by one and add them together to get the total area. Is there any way to get the whole area easily?
windows are just rectangles (and solid hatch inside the rectangle).
I use poly lines for wiring, after completing all the routing, i need to calculate the total length of poly line, then wont calculate if line is broken at a point.
View 2 Replies View RelatedI don't know if it's good place to post it but finally there's a plugin in Autodesk exchange to count total length of elements. It names 'Tlen' and I've found it very handy.
View 1 Replies View RelatedArea Command Not Ending and Not Offering Total
View 4 Replies View Relatedi have an already edited part list (because there are parts that come from different assemblies and other ones that don't have to appear in that part list) and i like to show the total weight of my drawing, that doesn't correspond with any assembly.
So, there is any possibility of summing up the values of a part list column.
Any way to add all the areas of a space style to get a total SF#? Is there a way to add this information to a display theme style legend?(preffered) Is there a way to get this information in to a schedule? (less desirable)
View 1 Replies View RelatedI am well versed with the FEA system, however I do not see any way to get total pressure or load on a face. I know the info is there, the results let me probe points on the face, I just cannot find a way to get the total.
I have attached an image that illustrates the situation.
I will even dive into iLogic again if it is possible to achieve my goal there.
Is there any easy way to get the total length of selected lines (even if they are not "connected") ?
View 6 Replies View RelatedIs there a way to get a summary row in the parts list to show a total of the 'mass' column?
View 6 Replies View RelatedI would like to obtain, in a structured parts list, the total number of ITEM in the sub-assembly.
See the picture attached for the example.
I have found an iLogic rule to create an user ipropertie in each part, with the total nomber of this part in all the assemby (included all sub-assemblies).
I would like to know if it is possible to obtain the total of this part only in the sub-assembly. Is it possible with an iLogic rule or VBA ?
I have a plan prepared for CNC steel sheet laser cutting. One factor in the costing of the cutting is determined by cutting time or length of cutting. I want to determine the total length of all the lines in a selection so that I can determine what is the most economical design to achieve my goal. Is this possible in ACAD?
View 2 Replies View RelatedIs there a way to return the total number of layouts in a drawing file?
I would use it to update a field showing the total number of sheets in a set.
(eg 2 of "X", where X is the field variable).
I've read through some of the discussions on this subject. I have three lines of command visible. I blocked out my file. I audited my file. I have Service Pack 1.1 installed. I still continue to have intermittent problems with the area command. Please see in the attached video how it works in one area of my file, but not another area of the same file. URL....
View 2 Replies View Related