AutoCad :: Total Length Of All Polylines In Page
Jul 10, 2012I use poly lines for wiring, after completing all the routing, i need to calculate the total length of poly line, then wont calculate if line is broken at a point.
View 2 Replies
ADVERTISEMENT
AutoCAD Visual LISP / AutoLISP :: List Total Length Of Polylines
Jul 30, 2012where I can obtain a freeware lisp routine that lists the lengths of all the polylines on a specific layer or within a selection set? I want to avoid list if possible as there are rather a lot of polylines!
View 2 Replies View RelatedAutoCad :: How To Extract Total Area Of Layer Which Has Extrusions Of Polylines
Oct 25, 2011I created walls for a structure by drawing a simple polylines and extruding it by the Z axis, so that i get a vertical plane. I created a number of such planes in the layer. I want to extract total area of this layer which has these polyline extrusions (planes). I know the command of add area, but it is a tedious process and does not work for curved planes. How do I extract the area for the entire layer in one go ?
View 9 Replies View RelatedAutoCAD 2010 :: Total Length Of Objects
Dec 5, 2013How Do I find the total length of several objects or separate lines without having to click on each one individually and add them up.
View 5 Replies View RelatedAutoCAD LT :: Total The Length Of Multiple Lines?
Nov 5, 2013I have a large group of lines that I want to get a total length of. Right now the only way that I know how to do this is to highlight them all and use the list command but then I have to go through the text box and write down each line length and then add them up. This is fine if I have only a few lines but when you get into the hundreds or thousands it becomes a monster task.
I tried copying the text box data into a Word document, removing all of the text except for the line lengths and then dumping that into Excel to calculate. This works ok for a hand full of lines but is not really practical.
I know that there are LSP routines that can do this in the full version of AutoCad but LSP is not supported in AutoCad LT.
Is there a way to automate this process in LT?
Or maybe extracting just the length data from a line to a text file where I can send it to Excel and use Excel to add up the lengths?
AutoCad :: How To Calculate Total Length Of Walls
Oct 18, 2013how to calculate the total length of walls.... by one command or i just calculate it one by one.....
View 4 Replies View RelatedAutoCad :: Count Total Length Of Elements?
Nov 24, 2013I don't know if it's good place to post it but finally there's a plugin in Autodesk exchange to count total length of elements. It names 'Tlen' and I've found it very handy.
View 1 Replies View RelatedAutoCAD 2013 :: Get The Total Length Of Selected Lines?
Apr 23, 2013Is there any easy way to get the total length of selected lines (even if they are not "connected") ?
View 6 Replies View RelatedAutoCad :: Total Length Of Lines In Complex Plan?
Oct 24, 2011I have a plan prepared for CNC steel sheet laser cutting. One factor in the costing of the cutting is determined by cutting time or length of cutting. I want to determine the total length of all the lines in a selection so that I can determine what is the most economical design to achieve my goal. Is this possible in ACAD?
View 2 Replies View RelatedAutoCAD Inventor :: Parts List - Generate Total Length In Inches
Jun 7, 2013I use my parts list to generate a total length in inches of the same part that is used in several places in my assemblies. I then export it to excel, convert it to feet, etc. I've been doing this for some time now and it works great. The problem I am now having is I forgot how I got this magic to happen and I need to set another part to appear with it's total length in the list. From what I remember I set the QTY column in the parts list to show the length of the part and then I set the parts list to merge the same parts. For the life of me I can't remember how I did this. How this is done correctly?
All of the parts are created by the frame generator if this matters.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
AutoCAD Inventor :: Calculate Total Length Of Multiple Doors On Single Machine
Apr 26, 2013I use flat piano hinges on doors for many of the machines we build. I would like to be able to calculate the total length of multiple doors on a single machine. We buy these hinges so it needs to go on a buy out parts list.
So here is my problem:
To make it a useable hinge I build an assembly from two hinge halves.
This allows me to check for interference within the machine when the door gets opened.
I set the BOM structure of the assembly to purchased so it shows up on my buy out list.
Both halves of the hinge are set to normal.
There are hinges of different lengths on the same machine.
I can link a parameter of one of the halves to the assembly to show length of the hinge but I cannot set the BOM base qty on the assembly to that parameter so Inventor can add up the lengths.
When I group the items in a buyout parts list the result is "0." The individual assemblies show the correct length because I use the "length" parameter that is linked for the QTY in the parts list. But I cant "add" the lengths and have a total whe I group them.
I need to have mixed units in this list. Some things are bought as Each and these hinges are bought in length.
AutoCAD Visual LISP / AutoLISP :: Total Length Of Selected Object And Summarize Them A Table
Jan 4, 2014I need a lisp file that can read the total length of selected object (lignes, polylines) and summarize them by layers or by color in a table
e.g
command:tl (total length)
select objects
found total length.......
select object (Ent)
total length or [Add/Subtract/Table] :
total length = .......
if table
Enter an option by [ Layer/Color/line Type/line Weight] <layer> :
AutoCAD Visual LISP / AutoLISP :: Count Dynamic Block Including Total Length?
Apr 2, 2012lisp to count dynamic block including total length.
View 9 Replies View RelatedAutoCAD Inventor :: Merged Frame Generator Members Equal Wrong Total Length?
Jan 21, 2013I have a feeling this goes way back to the first release of INV we had (release 14?). Basically the merged FG member length seems to be calculated using the member centre line instead of real lengths. See the attached Pack-N-Go.
The view on the left is a Merged FG member. The view in the middle is individual FG members based on a line of symmetry in the same sketch. Both are placed using the mid point option in the FG dialogue. The views on the right are the 3 separate members used for the middle view.
The Merged length shows 722 mm whereas adding the 3 member lengths (RH view) equals 740 mm. 18 mm short, or 2 sets of 9 mm (shown in the middle view) which represents the end cuts to the middle member in the RH view.
Windows 7 x64 -64 GB Ram, Intel Xeon E5-1620 @ 3.6 GHz
ATI FirePro V7800 2 GB, 180 GB SSD & 1 TB HDD, Inv R2013 PDS Premium SP2 Update 3 (Build 200), Vault 2013 Workgroup Update 2 (Build 17.2.9.0)
Revit :: How To Determine Total Length Of Multiple Line
Jan 18, 2012This is something that used to be very easy to do in autocad (with a polyline) and checking the length on the properties bar. When I select multiple lines (chain of lines) the "length" data is greyed out. I hate having to measure every segment separately!
View 9 Replies View RelatedAutoCad 2D :: Select All Thirty Or Forty Of Lines And Return A Total Length Of All Of Selected Lines
Jul 9, 2012I have selected several lines (not pl or spl), just lines, all of which are the same layer and such. I want to be able to select all thirty or forty of the lines using either the select similar (lisp, AC2010) or quick select and return a total length of all of the selected lines. In the properties box it shows as varies.
View 2 Replies View RelatedAutoCAD 2010 :: Converting Polylines With Width And Text Into Close Polylines
Jan 2, 2014As the above mentioned, I have a drawing drawn using polylines with width from someone. The width of the line are suppose to represent area,
To put things into prospective, here is an example:
The polyline is 10 unit long and with a width of 2 unit wide. If i explode that polyline, it will become a single polyline without width. The line are suppose to represent 10 unit long and 2 unit wide; representing an area.
My question is is there a way to change the line above directly from polyline with width to a close polyline (4 x polylines) of 10 unit long and 2 unit wide.
AutoCad :: How To Draw 3D Polylines Or Convert Single Lines To Polylines
Oct 9, 2013How to draw 3D polylines, or convert single lines to polylines?
this.JPG
AutoCad :: Converting 3D Polylines To Polylines With Elevation?
Jan 20, 2006Is there a way of converting 3d polylines to polylines with an elevation?
I have a dwg of contour information, the contours are 3d polylines, because they are contours the z value is constant all along the line, so there no question what the elevation of the polyline would need to be.
I need to do this as I then need to import the dwg into a GIS programme called MapInfo whch doesn't read 3d polylines.
I have access to AutoCAD 2004 or 2005LT.
AutoCAD Dynamic Blocks :: Change Length Of Line Based On Length Of Attribute
Jan 8, 2013Is it possible to change the length of a line based on the length of an attribute?
I'd like to make the line a MINIMUM length of X" (I haven't decided how long yet--but know I'll need a minimum). But then after the user fills in the attribute, I'd like the length of the line to change to the length of the attribute plus a small amount (again, I haven't decided yet how much extra).
AutoCAD Dynamic Blocks :: Line Length Follow Content Length Of Attribute
Mar 16, 2012I was wondering if there is a way with DB's to have a line "follow" or "grow" with the content/value length of an attribute. Maybe some method of linking the attribute width to length of the line? Essentially, it would work just like turning on the underline setting when typing in mtext editor (or any program with an underline option for that matter), expect that the line could be placed anywhere, and would not have to reside directly below the text.
View 5 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Change Length To Match Length
May 24, 2002Command to make a line change length to match length of a line, arc, polyline or circle? Could use this when making flat patterns layouts.
View 5 Replies View RelatedAutoCAD Civil 3D :: Changing Lane Width Not Affecting Resulted Values Of Length And Run Off Length
May 11, 2013With using superelevation wizard in Civil 3d 2012, changing the lane width is not affecting the resulted values of transion length and run-off length, Is that correct ? ( as civil is using standerd AASHTO tables which assume that lane width typically is 3.6m )
Also, There is only 2 tables for 2-lanes and 4-lanes roadway, Is it for total road width or for one directon only, and what about different no. of lanes ?
AutoCad :: Length In Metric Attribute To Automatically Populate Based On Input From Length In Imperial
Jan 24, 2012I am creating a block with attributes for a standard job. I have (4) total attributes in this block (for example: panel type, qty, length in imperial, length in mertic)
I would like my length in metric attribute to automatically populate based on the input from length in imperial.
Is this possible?
AutoCad :: Remove Model Page Setup Entry From List Of Page Setups
Feb 1, 2012Using Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
AutoCAD 2013 :: Change Page Setup For More Than 1 Page At A Time?
May 6, 2013I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View RelatedAutoCAD .NET :: How To Get Total Scale Of MLeader
Sep 9, 2013How to set the total scale of a mleader in C#?
In German it's called: Gesamtskalierung
I had no Problem with this....
_mLeader.LandingGap = 6;
_mLeader.TextHeight = 60;
_mLeader.MLeaderStyle = _mleaderStyleId;
but the total scale is also very important for me. I try to add a picture with a red frame so you can see what I' missing.
AutoCAD Civil 3D :: Transfer From Total Stations?
Sep 2, 2012How can I transfer (download) measured data from total stations 'Trimble' and "Leica" to AutoCAd Civil 3D 2013? Must I find a module from the sites of these manufacturers? Or how can I change from total stations formats to the Feald Book format?
View 6 Replies View RelatedAutoCAD Architecture :: Total Layer Offset
Feb 11, 2013Is there a way to operate an offset to an entire layer?
I have a layer that has all the trees in the area. I want to do an 8 foot offset of every tree that is plotted. But there is like 2000 trees. Is there a command to do them all at once?
AutoCAD Civil 3D :: Total Inflow / Outflow
Aug 22, 2012why my model shows an event mean storage of 20396 cf when I don't have any storage nodes? How is the model storing that amount of water? I'm thinking this is why my total inflow doesn't match my total outflows?
View 5 Replies View RelatedAutoCAD Inventor :: Calculating Total Volume
Apr 11, 2012I want to know if it is possible to calculate the water displacement volume of an assembly if it were immersed in water.
In other words, I want to create a file in which ALL hollow spaces inside structural members, valves, pipework etc are assumed to be solid so that when that assembly is dropped in water, the total volume of water being displaced will be equal to the iProperty value for volume. I know its possible to hole patch when creating a shrinkwrap, but this is only effective for 'circular' hollow spaces and does not fill obscure or rectangular shaped empty volumes.