AutoCad :: Total Length Of Lines In Complex Plan?
Oct 24, 2011
I have a plan prepared for CNC steel sheet laser cutting. One factor in the costing of the cutting is determined by cutting time or length of cutting. I want to determine the total length of all the lines in a selection so that I can determine what is the most economical design to achieve my goal. Is this possible in ACAD?
View 2 Replies
ADVERTISEMENT
Jul 9, 2012
I have selected several lines (not pl or spl), just lines, all of which are the same layer and such. I want to be able to select all thirty or forty of the lines using either the select similar (lisp, AC2010) or quick select and return a total length of all of the selected lines. In the properties box it shows as varies.
View 2 Replies
View Related
Nov 5, 2013
I have a large group of lines that I want to get a total length of. Right now the only way that I know how to do this is to highlight them all and use the list command but then I have to go through the text box and write down each line length and then add them up. This is fine if I have only a few lines but when you get into the hundreds or thousands it becomes a monster task.
I tried copying the text box data into a Word document, removing all of the text except for the line lengths and then dumping that into Excel to calculate. This works ok for a hand full of lines but is not really practical.
I know that there are LSP routines that can do this in the full version of AutoCad but LSP is not supported in AutoCad LT.
Is there a way to automate this process in LT?
Or maybe extracting just the length data from a line to a text file where I can send it to Excel and use Excel to add up the lengths?
View 2 Replies
View Related
Apr 23, 2013
Is there any easy way to get the total length of selected lines (even if they are not "connected") ?
View 6 Replies
View Related
Dec 5, 2013
How Do I find the total length of several objects or separate lines without having to click on each one individually and add them up.
View 5 Replies
View Related
Oct 18, 2013
how to calculate the total length of walls.... by one command or i just calculate it one by one.....
View 4 Replies
View Related
Jul 10, 2012
I use poly lines for wiring, after completing all the routing, i need to calculate the total length of poly line, then wont calculate if line is broken at a point.
View 2 Replies
View Related
Nov 24, 2013
I don't know if it's good place to post it but finally there's a plugin in Autodesk exchange to count total length of elements. It names 'Tlen' and I've found it very handy.
View 1 Replies
View Related
Jun 7, 2013
I use my parts list to generate a total length in inches of the same part that is used in several places in my assemblies. I then export it to excel, convert it to feet, etc. I've been doing this for some time now and it works great. The problem I am now having is I forgot how I got this magic to happen and I need to set another part to appear with it's total length in the list. From what I remember I set the QTY column in the parts list to show the length of the part and then I set the parts list to merge the same parts. For the life of me I can't remember how I did this. How this is done correctly?
All of the parts are created by the frame generator if this matters.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 9 Replies
View Related
Jul 30, 2012
where I can obtain a freeware lisp routine that lists the lengths of all the polylines on a specific layer or within a selection set? I want to avoid list if possible as there are rather a lot of polylines!
View 2 Replies
View Related
Jul 14, 2012
I am not at all familiar with complex topographic maps, ow to plan it out, elevation markers, the distance between the lines, which polyline to use? straight and arc or splines (to close later)..
View 9 Replies
View Related
Apr 26, 2013
I use flat piano hinges on doors for many of the machines we build. I would like to be able to calculate the total length of multiple doors on a single machine. We buy these hinges so it needs to go on a buy out parts list.
So here is my problem:
To make it a useable hinge I build an assembly from two hinge halves.
This allows me to check for interference within the machine when the door gets opened.
I set the BOM structure of the assembly to purchased so it shows up on my buy out list.
Both halves of the hinge are set to normal.
There are hinges of different lengths on the same machine.
I can link a parameter of one of the halves to the assembly to show length of the hinge but I cannot set the BOM base qty on the assembly to that parameter so Inventor can add up the lengths.
When I group the items in a buyout parts list the result is "0." The individual assemblies show the correct length because I use the "length" parameter that is linked for the QTY in the parts list. But I cant "add" the lengths and have a total whe I group them.
I need to have mixed units in this list. Some things are bought as Each and these hinges are bought in length.
View 1 Replies
View Related
Jan 4, 2014
I need a lisp file that can read the total length of selected object (lignes, polylines) and summarize them by layers or by color in a table
e.g
command:tl (total length)
select objects
found total length.......
select object (Ent)
total length or [Add/Subtract/Table] :
total length = .......
if table
Enter an option by [ Layer/Color/line Type/line Weight] <layer> :
View 4 Replies
View Related
Apr 2, 2012
lisp to count dynamic block including total length.
View 9 Replies
View Related
Jan 21, 2013
I have a feeling this goes way back to the first release of INV we had (release 14?). Basically the merged FG member length seems to be calculated using the member centre line instead of real lengths. See the attached Pack-N-Go.
The view on the left is a Merged FG member. The view in the middle is individual FG members based on a line of symmetry in the same sketch. Both are placed using the mid point option in the FG dialogue. The views on the right are the 3 separate members used for the middle view.
The Merged length shows 722 mm whereas adding the 3 member lengths (RH view) equals 740 mm. 18 mm short, or 2 sets of 9 mm (shown in the middle view) which represents the end cuts to the middle member in the RH view.
Windows 7 x64 -64 GB Ram, Intel Xeon E5-1620 @ 3.6 GHz
ATI FirePro V7800 2 GB, 180 GB SSD & 1 TB HDD, Inv R2013 PDS Premium SP2 Update 3 (Build 200), Vault 2013 Workgroup Update 2 (Build 17.2.9.0)
View 8 Replies
View Related
Jan 18, 2012
This is something that used to be very easy to do in autocad (with a polyline) and checking the length on the properties bar. When I select multiple lines (chain of lines) the "length" data is greyed out. I hate having to measure every segment separately!
View 9 Replies
View Related
Jun 28, 2013
Being all new and complete virgin-like, to ilogic, I would like to know wether it is possible to analyze a sketch (wenn it is being closed)?
What I want to analyze is:
Does the sketch contain a fully constrained closed loop?
Does this closed loop consist only of straight lines?
What is the total number of lines in the loop?
Next fase is:
Create an excel-sheet with the following information:
For each line in this closed loop i wish to add the length of the line, and the angle to the next line (consequently on the internal side of the loop, resulting in angles from 0 to 180 degrees).
View 2 Replies
View Related
Oct 7, 2013
I have a lot of lines that I need a length, like in attached file. At this moment I do it with a vba that put fields in all lines.
The problems:
1) fields makes drawing slow to regen or after I modify line.
2) fields not follow lines slopes and position, if I stretch or move one end point of line. Text must be in middle of line.
So I thinking use reactors .
I tried reactor but I don't have much experience in lisp and I am having problems with persistent reactors, after I close file and open again, load lisp. Reactor not continue persistent.
This is a test that I tried. Works only for one line.
(defun print-align-text ( owner reactor lst / sp ep a d )
(setq sp (vlax-curve-getstartpoint line1))
(setq ep (vlax-curve-getendpoint line1))
[Code].....
I have read that is better store data using XData. In VBA I tried construct class module with events, without any success.
View 9 Replies
View Related
Oct 31, 2013
I was wondering if it is possible to measure the total length of lines I have in one layer without using the measure tool on each individual line. In searching other posts a lot of answers reccomend using LISP. Since I am not familiar with LISP at all and haven't purchased the add on is there a simpler way using AutoCAD LT?
View 2 Replies
View Related
Dec 13, 2012
I've looked at adding spaces to a plan that is simply lines and arcs... no intellegent objects.
It could get somewhat messy doing Generate Spaces... if the doors and swings are frozen the bounding objects don't get found... but if the doors and swings are on... the spaces go in fairly well... but then the door swing is used as a boundardy.
View 4 Replies
View Related
Apr 17, 2012
I have a low pressure sewer system that runs along a road side but is not always parallel to the road. I'm using hte centerline of the road for my alignment. What I need to do is have a profile of the existing ground above the centerline of the pressure pipes show in the plan/profile sheets. I do not need a profile of the roadway.
I'm currently using feature lines to accomplish this and that works fine in the main drawing, however, the profiles I create there don't transfer to the plan/profile sheets when I create them. The only way I have found so far to get thoe profiles to show in the plan/profile sheets is to create the feature lines in the plan/profile drawing and project those lines to my profile view. This is a fairly large system so I will have numerous plan/profile sheets. Creating the feature lines and profiles in the individual sheets is fairly time consuming.
I'm currently using Civil 3D 2012. I realize that with the addition of pressure pipe networks in 2013 might very well give me the tools I need but I'm at a point in this project, and our office, where switching to 2013 isn't really an option yet. However, if that is my answer then I will have to consider that.
View 6 Replies
View Related
Dec 11, 2013
Which program is used now days to create a ships hull lines plan? In the old days it was done on the floor or board drafting.
If I have a unique curved bow, which software is used to create the lines plan.
View 5 Replies
View Related
Apr 8, 2013
I am attempting to creating a complex profile of a window frame using the Edit Profile command within Sweep. It tells me that lines cannot intersect. How can I draw more that just a simple rectangular profile?
View 3 Replies
View Related
Mar 21, 2013
How can I have sketch lines drawn to perfect lengths. I mean it should be in multiples of 1/16 of an inch.
Inventor Professional 2013
Vault Collaboration 2013
View 9 Replies
View Related
Jul 23, 2013
I opened a part today and noticed that it had collapsed into itself.
This should be a rectangle 85x15.75:
On closer inspection it appears that the vertical lines somehow became zero length lines. Why does this happen?
Edit: I should mention that I was able to repair the skecth by making the 85" dimension driven, then dragging the line over...
View 3 Replies
View Related
Jan 23, 2014
I have a line that i would ideally like to divide into 3 equal segments. The divide command places points along the line, but I can't snap to them.
I know that I can place a block at each point which I could snap to, but is there a way of doing it without creating a block? Also is there a command that actually splits a line into 3 equal-length lines?
View 3 Replies
View Related
Nov 18, 2012
Some times when I re open a drawing I have been working on, I start to dimension and I notice that the dimension extension lines stay the same length when I move the dimension in and out from the object being dimensioned.
Not sure why this happens, I do all my dimensions in model space, in fact I do just about everything in model and then just set it up in paper space to print.
I never change anything when I start a new drawing in my template, so not sure why it happens.
View 2 Replies
View Related
Jun 23, 2012
I am drawing a diagram to describe a mathematical word problem. Since it is easier to visualize with a drawing, I want to draw it using the given dimensions. But angles used in the diagram are unknown and are not needed for the answer to be calculated, so the only way to draw this freehand is to guess at the angle resulting in the correct distances to be off.
Here is the word problem: There are two ladders, one 40 feet and the other 30 feet, each touching the base of one of two buildings and leaning against the other building. If the ladders cross 10 feet above the ground, how far apart are the buildings?
So for my drawing, being rather simple considering what AutoCAD can do, results in this:
Can AutoCAD calculate the angle needed to place a line of a given length between two parallel lines that are a distance apart less than the length of the line to place between them, having the endpoints of this line touching the parallel lines, fitting exactly?
For the word problem, the distance between the two parallel lines is what needs to be solved and the math is quite invloved, having to find the roots or solution of a quartic equation. (I have the solution figured out to be 26.03287754 feet)
What I am afraid of is that this would require to program an AutoLISP routine to create a new command that one can call from the command line. I see it using the the measure command with relative and absolute co-ordinates. This may be far from a "beginner" question. I can do this quite easily on a peice of paper: having two parallel lines drawn, take a ruler and placing the "0" mark on one line, then adjusting the angle until the desired length just reaches the opposite parallel line. I used to use this trick quite often when drafting with pencil and paper to divide a distance into a required number of even amounts, so this can't be that difficult to do with AutoCAD!
View 9 Replies
View Related
Nov 8, 2002
Is there any utilities that can select the entire drawing with the 2d polyline and erase all the polyline less than specify length (eg:10m,20m etc) ?
View 4 Replies
View Related
Aug 6, 2013
I have lisp code, which count total length, but I need that it count and multiply by constant which I choose manual (such as in example, total lines yellow length * y + total blue lines * x = ... , example 50*2 + 60 * 3=280),
remember the another code, such as I have d200 with total l=1000 and d250 with total l=1500, i need to count total cost such as 1000*y+1500*x
one think, diameters numbers is not only 1 or 2, it can be many different diameters.
dwg file here:
[URL]..........
lisp file here:
[URL]........
View 9 Replies
View Related
Feb 18, 2013
I have an OS plan with the 100 metres squares marked.I want the ruler to coincide with the known 100m length.Then I can mark on layers various lines of say 7m or 25m long.How can I set the ruler and guides to enable me to draw lines such as this.
View 9 Replies
View Related