Is there a way to return the total number of layouts in a drawing file?
I would use it to update a field showing the total number of sheets in a set.
(eg 2 of "X", where X is the field variable).
I have been trying to create a macro that would add a custom property to my sheet metal parts that would tell me the total number of piercings in the part (holes and punches). So far I have the punches to count correctly but I am having issues with the holes, as I am getting an error.
Sub Piercings() 'Get the part doc and sheet metal component defn. No error handling: Dim oPartDocument As Inventor.PartDocument Set oPartDocument = ThisApplication.ActiveDocument Dim oSheetMetalComp As
[Code]....
Being all new and complete virgin-like, to ilogic, I would like to know wether it is possible to analyze a sketch (wenn it is being closed)?
What I want to analyze is:
Does the sketch contain a fully constrained closed loop?
Does this closed loop consist only of straight lines?
What is the total number of lines in the loop?
Next fase is:
Create an excel-sheet with the following information:
For each line in this closed loop i wish to add the length of the line, and the angle to the next line (consequently on the internal side of the loop, resulting in angles from 0 to 180 degrees).
Is there a quick and easy way to get the total number of layers in a photoshop document? I've searched high and low, and everything I've found involves scripting, which I haven't gotten into - and don't really want to spend much time on this.
View 9 Replies View RelatedAs you smart individuals can figure out, we do up drawing packages for construction that consist of several drawings, hundreds of drawings, for several modules of construction. Our process usually consists of one layout per drawing, so that the lisp guy can do a drawing count and put in sheet numbers based on how I manipulate the list of drawings in the one directory folder.
Now I have a client, despite the way we currently do things, requires that about 70% of the drawings will have multiple layouts. Now we're back in the stone ages, manually putting in sheet numbers, eating up our budget for this contract.
I have used PSE 9 and there was a line at bottom that told the total number of photos in the Organizer. I now have PSE 11 and I can find no such line, and I have not found a way to tell the total number of photos in my Organizer. Where is this information hidden?
View 4 Replies View Relatedin the field names I only see current sheet number...is there a way to set the field to another sheet number besides the current one? 2013 Civil 3D
View 5 Replies View RelatedI am using Sheet Set Manager. I can use a field that will enter the sheet number on each layout. I am looking for a way to have a field use this number and minus 1 or add 1 to get the sheet before and sheet after the current sheet.
View 5 Replies View RelatedI am trying to turn on the stock number field under customizable fields within vault, however stock number is not an option...has this always been the case?
View 1 Replies View RelatedSetup or style expression that will take a field in a shape file that is defined as an integer and display it on a map with comma's for the 1000 maker (ie. 5913240 as 5,913,240).
I am using AutoCAD Map v2012 (can use 2013 if it has anything built in)
The Field dialog box has an item for CurrentSheetNumber with field expression: %<AcSm Sheet.Number>%
Is it possible to create a Field to display the Next Sheet Number (CurrentSheetNumber + 1) and a Field to display the Previous Sheet Number (CurrentSheetNumber - 1)?
how to write a field that will add or subtract one from the drawing number. I'm adding drawing join line text to drawings so I need the text on the left to read one less than the current drawing & text to the right to read one more.
in drawing 005 text would read "joins drawing 004" & "joins drawing 006"
This is the field for file name (drawing number)
%<AcVar Filename f "%fn7">%
Any way to adjust this to add or subtract one?
in setting my scale. for example if i hace to draw a box so when i print n measure it reads 5cm x 5cm. how do i enter a scale ?
View 9 Replies View Relatedhave a diesel expression that would read a layout tab? for example if i have a layout tab names 244180101 I would need it to read the last 2 digits in the layout tab.
AutoCAD Civil 3D 2014
HP Z620 Workstation 64-bit
Duel Intel Xeon E5-2620 @ 2.00 GHz
Ram: 48 GB
I am trying to create a leader that reads the block "name" and then places it into circle, or square at the end of a leader.
I see it in the "other" programs but I have plain ole Autocad.
Should be simple enough except my brain is locked in the clouds and im spinning around in circles.
Which may not be a bad thing, except NASCAR hasnt started yet.
I have a room with a cathedral-style ceiling. I'd like to create a freeform space. What's the secret? I've changed the properties from extruded to free form, and then selected the boundaries (floor slab, ceiling slabs & walls), then hit "G" to generate the space. The command line reads no space generated.
View 2 Replies View RelatedIs there a way to turn off all section tags for drawings refering to all Sketch Layouts in all the Construction Document Layouts?
View 4 Replies View RelatedI have created a linetype with the text GAS OPTION in it. The line is continuous with a break around the text. In a straight line the linetype works fine (breaks around the text etc). However, when I use a polyline and spline the line for a curved line the text aligns with the direction of the line at the start, but when the line bends, the text suddenly changes direction and reads in the opposite direction. It looks like AutoCAD is trying to keep the text upright rather than following the direction of the line. When the text changes direction it also changes its insertion point and overlaps the continuous part of the line. I have 2013 AutoCAD.
Here is the string I used for the linetype.
*GAS_Option_LINE,Gas line ----GAS OPTION----GAS OPTION----GAS OPTION----
A,8,-15,["GAS OPTION",STANDARD,S=2.54,U=0.0,X=-2.35,Y=-1.27],-12
How to copy the "Title"-field and the "Caption"-field into the "Keyword"-field?
View 3 Replies View RelatedHow to “synchronize” the ‘layout number” with “sheet number”?
As in most cases, the arrangements of “lay outs” reflects the way they are regularly printed, then how could we renumbering the sheets such that the first lay out takes number 1, the second lay out takes number 2,…and so forth.
For example, in the screenshot below, the
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Error in illustrator cc , when i open a .ai file illustrators does not open it and says text import option, how can i open this file
View 4 Replies View RelatedHow to set the total scale of a mleader in C#?
In German it's called: Gesamtskalierung
I had no Problem with this....
_mLeader.LandingGap = 6;
_mLeader.TextHeight = 60;
_mLeader.MLeaderStyle = _mleaderStyleId;
but the total scale is also very important for me. I try to add a picture with a red frame so you can see what I' missing.
How can I transfer (download) measured data from total stations 'Trimble' and "Leica" to AutoCAd Civil 3D 2013? Must I find a module from the sites of these manufacturers? Or how can I change from total stations formats to the Feald Book format?
View 6 Replies View RelatedIs there a way to operate an offset to an entire layer?
I have a layer that has all the trees in the area. I want to do an 8 foot offset of every tree that is plotted. But there is like 2000 trees. Is there a command to do them all at once?
How Do I find the total length of several objects or separate lines without having to click on each one individually and add them up.
View 5 Replies View RelatedI have a large group of lines that I want to get a total length of. Right now the only way that I know how to do this is to highlight them all and use the list command but then I have to go through the text box and write down each line length and then add them up. This is fine if I have only a few lines but when you get into the hundreds or thousands it becomes a monster task.
I tried copying the text box data into a Word document, removing all of the text except for the line lengths and then dumping that into Excel to calculate. This works ok for a hand full of lines but is not really practical.
I know that there are LSP routines that can do this in the full version of AutoCad but LSP is not supported in AutoCad LT.
Is there a way to automate this process in LT?
Or maybe extracting just the length data from a line to a text file where I can send it to Excel and use Excel to add up the lengths?
why my model shows an event mean storage of 20396 cf when I don't have any storage nodes? How is the model storing that amount of water? I'm thinking this is why my total inflow doesn't match my total outflows?
View 5 Replies View RelatedI want to know if it is possible to calculate the water displacement volume of an assembly if it were immersed in water.
In other words, I want to create a file in which ALL hollow spaces inside structural members, valves, pipework etc are assumed to be solid so that when that assembly is dropped in water, the total volume of water being displaced will be equal to the iProperty value for volume. I know its possible to hole patch when creating a shrinkwrap, but this is only effective for 'circular' hollow spaces and does not fill obscure or rectangular shaped empty volumes.
how to calculate the total length of walls.... by one command or i just calculate it one by one.....
View 4 Replies View RelatedI have a building like this and it has a lot of windows.
I know how to calculate an individual window area by using 'area' or 'ls' command. But this is just partial drawing and the whole building has hundreds of windows and it will take forever to calculate one by one and add them together to get the total area. Is there any way to get the whole area easily?
windows are just rectangles (and solid hatch inside the rectangle).
I use poly lines for wiring, after completing all the routing, i need to calculate the total length of poly line, then wont calculate if line is broken at a point.
View 2 Replies View Related