AutoCAD Civil 3D :: Get Feet Mark On Dimension

May 9, 2012

I am trying to get the feet mark (') on the dimension, right now I have 66.71 and I want 66.71'.

View 5 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Exporting Changes Settings From Survey Feet To International Feet

Feb 25, 2013

I have a drawing set up to be Survey Feet and everytime i export it to autocad using the export tool it converts it to international feet.

Civil 3D 2012 all sp's

View 3 Replies View Related

AutoCad :: Dimension In Feet And Inches

Jun 6, 2011

When I try and dimesion my drawing it brings up 8' as 8" on the dimesion line, and when I dimension something like 1'-10" it brings up 1'-10''' on the dimesion line. Once i click the dimesnion to attach it to the drawing I click on the measurement tool and it bring up the correct measurement. Is there a way to fix this?

View 2 Replies View Related

AutoCAD 2013 :: Exclamation Mark With The Dimension?

Jun 21, 2012

Exclamation mark with the dimension!

I’m wondering why I got exclamation mark (!) with the dimensions! I wanted to get rid of them but sounds that there is now way to achieve that. I tried to right click the exclamation mark (!) and choose the “reassociate” but with no effect!

Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

View 6 Replies View Related

CorelDRAW Graphics Suite X5 :: Set Dimension Tool To Use Both Feet And Inches

Apr 11, 2012

This is probably simple, but I cannot find how do display dimensions on both feet and inches.

Currently my dimensions display as a decimal (ie 12.5' ).  I would like both feet and inches (ie 12' 6" )

Where do I change this, turn on option?

View 6 Replies View Related

AutoCad :: Display Area Of Closed Polyline As Feet Inch Rather Than Feet As A Decimal

Sep 20, 2011

Is there a way to make AutoCAD2012 display the area of a closed Polyline as Feet- Inch(ex 22'-4") rather than the feet as a decimal (ex feet=22.3333333) as it does when the units are set to Architectural or Engineering?

View 1 Replies View Related

Revit :: Edit Tick Mark In Dimension Style

Jul 11, 2011

I need to edit the tick mark in dimension style or make a new one, in revit 2011.

View 5 Replies View Related

AutoCAD Civil 3D :: Convert Feet To Meter

Mar 14, 2013

I have browsed one file in meters from Pythagoras to dwg. When I opened it with Civil 3D the drawing units become feet. Where is the problem and how can I convert the whole drawing to meters? 

View 5 Replies View Related

AutoCAD Civil 3D :: Z Distance In Inches Not Feet

Dec 11, 2012

I have a very simple surface. All of the elevations defining it, are set in feet. When I click on the surface it tells me my max and min elevations are in feet matching the points that I have defining the surface.

Here is the kicker, when I run a distance it is measuring the Z distance in inches and not feet. As you can see by the attached image the distance is 95' but the elevation change is 1 3/8".  The actual points defining the surface are 1.28' difference. If I were to do a spot elevation on the surface, it would give me the correct elevation in feet. I am guessing that this is some sort of variable that I have missed, but damned if I can find it.

View 7 Replies View Related

AutoCAD Civil 3D :: Nodes In Drawing Are 4 Feet Off

Nov 18, 2013

I import a text file. I look at the coordinate list in the toolspace under the survey tab and the coordinates listed are correct. but the nodes in the drawing are 4 feet off.

View 5 Replies View Related

AutoCAD Civil 3D :: Metric Versus Feet And Inches

Jun 14, 2012

I have a drawing in metric but I want the results in feet and inches, do I draw it in metric and have Autocad spit out a feet and Inches drawing, is that even possible. Or do I do the conversions up front and explain to the client that he will get his metric drawing back in feet and inches.

Second part, if the drawing is in metric do I open the Autocad Civil 3D metric icon or does it matter. Where I can read up on why there is a metic and imperial Autocad icon?

View 3 Replies View Related

AutoCAD Civil 3D :: How To Change Feet To Decimal System

Jul 18, 2012

My data is in decimal format and

In metric I am geting the feet interval of contours 

How to change the feet to decimal system

View 9 Replies View Related

AutoCAD Civil 3D :: Distance Displays In Inches Want Feet?

Apr 24, 2012

When I use the distance command the answer displays in inches; I prefer feet of course. How do I navigate to the menu that changes this?

View 4 Replies View Related

AutoCAD Civil 3D :: Coordinate System To Survey Feet

Nov 5, 2013

We are having a bit of a debate in our office. When you are working on civil engineering project where you are recieving files form Architects and Landscape Architects, and sending out "Dumbed Down" AutoCAD files to folks who don't have Civil3d, do you change your Civil3d Coordinate System to survey feet & specify your state plane coordinate system?  

View 1 Replies View Related

AutoCAD Civil 3D :: DEM Has X Y Coordinates In Meters - Z Elevation In Feet

Oct 22, 2012

I'm trying to create a surface from a DEM (as a *.adf file)

How to convert between coordinate systems. (a UTM system to a State Plane)

How do I control the elevation values? My DEM has x,y coordinates in meters, but elevation values are in feet...

So far what's happening is that I end up with all the z values multiplied by 3.08... (I assume it is trying to convert the meters to feet..., but since I already have feet in the DEM ... no good)

View 9 Replies View Related

AutoCAD Civil 3D :: Volume Calculations In Acre Feet?

Aug 24, 2012

Any way for Vol. calcualtions to be shown in Acre Feet? I am doing Volums of lakes and the client needs a report of the number of Acre Feet in the lake. To get the data, he uses a depth finder hooked up to a GPS. I can do this by hand calculator but using Civil 3D 2013 would be much easier.

View 9 Replies View Related

AutoCAD Civil 3D :: Area Units Displayed As Square Feet?

Jan 18, 2013

In Civil 3D 2013, when I execute the _area command, i get results in square feet as opposed to acres.  Under the ambient settings, the area unit is set to acre. how to get C3D to display my area in acres?  I just want it to list the area, not label it.

Also, is there a way to get it to display the area in BOTH acres and square feet?

View 6 Replies View Related

AutoCAD Civil 3D :: How To Force Dims To Show Feet And Inches

Feb 27, 2012

I'd like to show feet/inches with arch units even when i have a whole number measurement. right now the dim for 16' shows as 16' only. i want it to show as 16'-0"

View 3 Replies View Related

AutoCAD Civil 3D :: Change Station Increment To 25 Feet And Have Labels

Nov 12, 2013

I have an alignment and have station labels.  The alignment is labeled with "Major Stations" at every 100 feet.  I need to change the station increment to 25 feet and have labels.  I have done this although station 1+25 is still reading 1, station 1+50 is reading 1, etc.  There is a precision variable somewhere, and I can't figure it out.  I have played with the alignment labels style but no luck.  Is there a global drawing settings somewhere that might be controlling this?

View 2 Replies View Related

AutoCAD Civil 3D :: Calculate Area Using Polyline - Calculation Not In Square Feet?

Dec 16, 2013

I was just wondering why when I try and calculate an area using a polyine, I am getting a readout of 1.80401967E+07, when I have it set to give me the calculation in square feet? It is an area of approx. 246 Acres.....is this because the area is so large? I am not sure what the "E" stands for or the "+07" at the end....

View 6 Replies View Related

AutoCAD Civil 3D :: How To Show 1500 Feet Of Stationing In Plan And Profile Sheet

Feb 21, 2013

When I run my production sheets I'm only seeing 1300 feet of my profile and I like to see 1500 feet of my profile at 50 scale. Is there a way to show 1500 feet of profile?

View 9 Replies View Related

AutoCAD Civil 3D :: Pipe Tables - Size Column To Display In Inches Rather Than In Feet

Apr 12, 2012

I've got the Pipe Table style just as I need it except for one thing. I have all circular pipes and I would like the "size" column to display in inches rather than in feet. In the past I was able to multiply this number by 12 in the style composer but that doesn't seem to work anymore.

View 2 Replies View Related

AutoCAD Civil 3D :: Measuring From Alignment Tick Mark?

Nov 7, 2013

How come when you try and check a distance on an alignment, and say I try and click on one of the tick marks it will not snap to the intersection of the tick mark....it like jumps off like half a foot and will not give you an accurate measurement?

View 2 Replies View Related

AutoCAD Civil 3D :: Mark Spot In Drawing And Come Back?

Jan 9, 2014

Not sure how to word this question correctly.  I saw a co-worker do a 'temp-save' on a drawing, mess around with drawing, and then come back to the spot in drawing where he had 'saved' to essetially deleting all the stuff he had done.  I cannot remeber what he used to mark this and then be able to come back, but if he liked the edits he had made, he could just keep drawing.

View 2 Replies View Related

AutoCAD Civil 3D :: Show Mark In Point Zoom

Oct 29, 2013

I have included a button with the same function that "zoomSta" from dotsoft.It is at the end of the list (zoomsta): URL...However,I would like to show a temporal cross mark in point of zoom like command "zoomsta" does.

How can I show that mark and that mark disappears  when I do zoom or regen?

View 2 Replies View Related

AutoCAD Civil 3D :: Changing E-max Value Introduces Exclamation Mark

Aug 3, 2013

Changing e-max value introduces an “exclamation mark”,

 I wanted to select an emax of 6% but sounds that the horizontal curve is flagged by “exclamation mark” (attached). What might be the issue here?

View 4 Replies View Related

AutoCAD Civil 3D :: Point Description​ Gets Truncated After Mark From Field Data

Aug 23, 2013

I am trying to get my points to displey the " mark from our descriptions. The description keys are set to $* and I have tried changing the Label Style from full description to raw description. I cannot get any information after the " mark from our field data. LDD used to put it in, but civil 3D truncates the information. I know I can do a find and replace in the .csv file, but would rather not have to continually edit the .csv file. Where the setting in civil 3D is to allow this to happen? I have even messed with the Point File Formats to no avail.

View 2 Replies View Related

AutoCAD Civil 3D :: Slope To Depth Of 10 Feet Than Change To 2:1 Slope

Aug 13, 2012

I am in the process of transitioning from land desktop to Civil 3D. I design roads in steep terrain and sometimes need to have my catch (daylight) slopes change. So my question is, how do I change a daylight slope at a specified depth? For example, from the shoulder of the road I want a 3:1 fill slope to a depth of 10 feet than change to a 2:1 slope until it catches the existing surface. Can this be built into a subassembly such that if the fill is less than 10 feet it will daylight correctly at a 3:1 and if the depth is greater than 10 feet then it carries the 3:1 for 10 vertical feet and then changes to the 2:1 until it daylights?

View 9 Replies View Related

AutoCAD Civil 3D :: Pipe Profile Station Label Shows Question Mark

Jun 21, 2012

how to update the information? I revised the pipe alignment but the profile did not update the station. WHat steps do I need to perform?

View 1 Replies View Related

AutoCAD Civil 3D :: Mark Items In Alignment View To Display In Profile View?

Dec 20, 2012

I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view.  I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items.  The marker I would like to use will be something like the vertical style grade break markers.

Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?

View 9 Replies View Related

AutoCAD Civil 3D :: Dimension Along Polyline

Jun 21, 2012

I want to dimension along a curvy polyline.  I don't want to station it like a centerline.  It is for pavement marking dimensions in a curvy road and I want to show the total length of turn lane lines while they go through an s-surve.  I could draw the dimensions manually and have in the past. For the contractor, I would simply station and offset it, but it makes it easier for the reviewer to see total turn lane, taper and lane shift lengths, rather than having to calculate them from station and offset callouts.

LT, C3D 2005 - 2014
XP, Vista, 7

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved