ok here it goes, when i want to use the units menu to change from inches to mm , or use the modify menu i get the following error(s)
'_units Unknown command "UNITS". Press F1 for help.
and same thing happens with properties.
I am drawing a plan view of building that is 11 feet by 36 feet. I thought my map units were in feet but when I draw in the linear dimensions, it reads 11 inches x 3 feet. How do I change this?
View 8 Replies View RelatedI have just reloaded CS5 onto my laptop with Windows 7 and I can't change the unit preference to inches. Every time I try to select it, it immediately reverts back to points.
View 2 Replies View RelatedHow do you change the measurement units from cc to inches in Illustrator 5? Changing it in preferences does not do anything.
View 2 Replies View RelatedEvery time I open Xara I have to change the default settings under "Utilities", "Options", "Units" from inches to pixels. There are other default settings I'd like to change as well, but my question is how do I change those settings to default so that when I open Xara, I don't have to go reset them? This is a PITA! I have searched through the help files and don't see any info on changing the standard default settings!
View 7 Replies View RelatedI have this problem with units. I am using 2012 Autocad drafting. I want to work with millimeters, for instance usually when I type 1000, that is usually refereed as 1 meter. Now in the new model space when I type 1000 the line is so long, I even have to press regenerate so that I can see the line. I checked the units, they are set to millimeters, I also checked from options - user preferences they are also set to millimeters.
When for instance I will open an older file that I worked on in autocad 2010, in autocad 2012, it will work fine, when I will write 1000, it will actually come up as one meter. The settings in units and options - user preferences are the same.
I also copied a table from the 2010 file to the new one, and the chair comes up very big in the screen, so again I use regenerate to zoom out.
Also every time I open a new file, I have to go to units and change it from Inches to millimeters. Is there a way to do it once, so that you don't have to do it every time you open a new file in autocad? I know you can customize your workspace, and I have, but that doesn't seam to do it.
I am working on AutoCAD 2014 and every time I receive and open a new file from our collaborators in Italy, the file units "turn into" inches.
This means that I have to go to Drawing Utilities, Change the units to cm, and then have to Scale everything so that the measurements make sense again.
I've gone into OPTIONS and have set CM as thed default measurements, but this problem persists. I know that the office in Italy can't possibly be working in inches, so I'm assuming there's something that's "lost in translation" when it comes to opening the file on my end.
When I want to edit a solid part in Inventor 2012, I click the "Edit Form" button which automatically launches Fusion. Units are defaulted to cm every time (I don't understand why it can't autodetect units) and the first thing I do is switch them to inches (english). I edit my part then return to Inventor. The part has been resized (smaller by a factor of 2.54) and moved off my original origin. I cannot figure out how to get around this HUGE problem. This has made Fusion useless to me and has drastically reduced the functionality of my ablility to solid edit.
If Fusion is intigrated into Inventor, why does it behave as a totally different product (reversed scroll wheel direction, different units, no refrencing between Inventor features and Fusion, etc.)? It's as if the Fusion programing team and the Inventor programming team met for just long enough to put the Fusion button in Inventor and nothing more.
I received a .dwg file from S. Korea with dimensions and units all in the metric mm and I need the units to be in feet and inches. Is there a command to switch dimensions and units to imperial feet and inches?Â
Rather than changing units in command UNITS Inches and Architectural, and SCALE 25.4, is there any other way to switch metric to imperial systems. Scaling somewhat does the trick but, provided dimensions remain in mm.
How do I make it so a new document in Photoshop uses Inches as its units instead of pixels? I have it set to inches in the preferences -> units & rulers but every time I make a new document it defaults to pixels for the dimensions. way to make that default to inches?
View 1 Replies View RelatedWhen i setup inventor 10 i choose to use inches, but now i want to use MM how would i change it under inventor 10 i thought it would bbe under options but it not.
View 6 Replies View Relatedhow do i change the dimensions from inches to cm on autodesk inventor?
View 1 Replies View RelatedSo I have this drawing, which has been annihilated by many different people. One area of concern (among many) is the drawing units...some objects are in inches, some in Millimeters, some in feet, etc...
Question:
Is there a way to change the entire drawing to inches, so if I select an object...any object, properties will have it in inches. Or, if I get area of an object, it will read in square inches?
AutoCAD 2012
According to a few tutorials I have read, the Units Menu should appear on the bottom line, alongside the Status and the Pointer Coordinates and Zoom Button. None of these items appear, and I have searched far and wide, but can't find out where to enable them. The only thing that appears on that line is "Background (2.7 MB)".
GIMP 2.6.8 on Mandriva 2010.2 x86_64.
I can't find the option that changes the scale from 1/100 to 1/16" to 1'-0" or how to have the scale show up on a drawing. I've gone into options and turned on the scale visibility but get squat on both.
Also where can I find a list of the title block text options ie. ,
Out of nowhere my AutoCAD commands such as line, offset, circle, etc will only work if i type in the amount in inches. I use feet / inches when i use these commands. It says specify second point... Not sure what this means. For example I want to offset a line 15'-8". It won't let me do that. If i offset a line at 146" it lets me do it.
View 5 Replies View RelatedI have Autodesk Inventor on a student license, and I use the metric system.
I've been able to change the settings for parts, presentations and assemblies to use millimeters, but for some reason the drawing sheets still use inches.
How do I change the unit settings for drawing sheets?
is there a way to change units, lets say i am making a wall with a unit of meters and suddenly i want to make a sofa with a unit of inches or a bed with a unit of feet.. is there a way to do this?
even if i change the units of the FORMAT tab, it stays the same...
In my autocad i draw in mm, how can i draw in m?
View 4 Replies View RelatedI have been trying to draw in mm, i.e, when i draw a line 1000 i want it to be 1000 mm. but currently when i do that i'm getting a line way too long, cant even zoom out to see it fully. i can only draw shorter lines (ex. 30) to be able to see it fully.
View 2 Replies View RelatedI got a unitless model! So, I changed it to Inches (Format/ Units). However, it does sound like nothing has been changed!
View 9 Replies View RelatedI created an idw and annotated all the dimensions in default to inches. Is it possible to switch all of the units from inches to mm at one time? If so, how?
View 2 Replies View RelatedI'm using sendcommand to draw various shapes in autocad.
the problem is my application (wpf) uses pixel units while autocad uses inches by default.
how can I change autocad units to pixel programmatically?
I have revived an old project that was started about 2 years ago. I went to attach my title block in paper space and the drawing was itty bitty.
Seemed unusual because in another layout the title block is there with the same page setups etc.
Then I looked at the block units and they were set to mm. Can it be changed? If so how? Or am I completely hooped?
ACA2011
Win7 64
My drawing template title block has a section for estimated weight. This value and overall size is used to determine shipping methods of our products. This value is pulled from the Type->Physical Properties-Model and Property->MASS. There is no option to turn off units. When our clients look at the drawing, they often get confused with lbmass unit. example; When someone asks what the weight of the product is, we dont say it is 1300 pound mass, we say it is 1300 pounds. I have looked around all different forums and found no complete answer or solution to this.
The only thing closest to a solution that I found on this forum is to create a rule that creates a custom iproperty within the model. [URL]........Â
You then have to create a text field in your title block that populates from that custom iproperty but can only be done when a base view is inserted from a model that has the custom iproperty rule applied.
From what I have tried, you can create a .ipt template to save you from creating that rule to create a custom iproperty each and every time, but to populate the title block field, a user needs to create that text field and draw from that custom iproperty once the base view is set on the drawing.
I also found a way to incorporate mass without units but the information will be put into the parts list. So instead of the weight being "automatically" entered into the title block after inserting base view, I could create a parts list for every drawing. (Not a good solution) [URL].........
One last solution that I found, is there used to be a tool called iProperty Collection[URL]....... that gave users the ability to customize some Inventor functions. One being the ability to change the unit displayed for MASS. I haven't tried using this tool because the last update off the website stated in 2009; says the software is not compatible with Inventor 2009 64bit, since I am using Inventor 2012 64bit, I think this is a dead end.Â
I have a query on the units for Autocad, every time i start Autocad up it defaults to inches, i have to change the units manually to mm using in units. is there a way to set this that i don't have to keep doing this?
View 2 Replies View RelatedI have some drawings that are drawn in millimeters. I need to add to the drawings but when I type 36 I get a line 36" long. I need to change autocad so that when I type 36 it draws a line that is 36mm.
View 9 Replies View Relatedhow can I change Von mises units, MPa ( Default) to another one?
View 3 Replies View RelatedI'm having an issue with dimensions changing from when I save the drawing to when I reopen it.
I'm using AutoCAD Mechanical 2009, exclusively in 2D. I save drawings in AutoCAD 2000/LT 2000 Drawing format to maintain backwards compatibility with our legacy documents which are still in regular use.
The exact process is:
1. Create dimension in existing drawing.
2. Set units of dimension. Typically this is fractional.
3. Save and close drawing.
4. Reopen drawing, and all of the dimensions units are set to decimal to the fourth decimal point.
If I interact with the dimension in any way, it will return to its set unit. For example, if I double click on it to bring up the Power Dimensioning window and just click Okay without altering anything, it will change back to its set unit. Likewise, if I move the dimension itself it will return to its set unit as well.
So far my solution has been to simply select the entire drawing at once, then move it X units one way, then X units back. The move back and forth will return all the dimensions to their set units.
Obviously this is not ideal, especially when sending drawings to co-workers who are unaware of the issue or even using different versions of AutoCAD.
Standard in autocad stands in the plot layout plot scale  inch en mm.
xxxx mm =
x      unit
I want to put meters into it. Is this possible and how to do this?
I am after a rule to change the unit type of all .ipts from cm to mm.
This has to go down to all levels in hierarchy  but only change .ipt files